Compare commits

..

No commits in common. 'i8c-beta' and 'c9' have entirely different histories.
i8c-beta ... c9

2
.gitignore vendored

@ -1 +1 @@
SOURCES/smartmontools-7.1.tar.gz SOURCES/smartmontools-7.2.tar.gz

@ -1 +1 @@
207dc2b50cab1c6fba7bc248665fbbe3189374e1 SOURCES/smartmontools-7.1.tar.gz 8d68241096f6ed5b1bbcd8b427fa4a881c1f3e33 SOURCES/smartmontools-7.2.tar.gz

@ -1,5 +1,5 @@
/* /*
* drivedb.h - smartmontools drive database file * drivedb.h - smartmontools 7.2 drive database file
* *
* Home page of code is: https://www.smartmontools.org * Home page of code is: https://www.smartmontools.org
* *
@ -68,7 +68,7 @@
/* /*
const drive_settings builtin_knowndrives[] = { const drive_settings builtin_knowndrives[] = {
*/ */
{ "VERSION: 7.3 $Id$", { "VERSION: 7.2/5440 2023-01-24 15:50:04 $Id$",
"-", "-", "-", "-",
"Version information", "Version information",
"" ""
@ -224,9 +224,8 @@ const drive_settings builtin_knowndrives[] = {
//"-v 194,tempminmax,Temperature_Celsius " //"-v 194,tempminmax,Temperature_Celsius "
//"-v 241,raw48,Total_LBAs_Written " //"-v 241,raw48,Total_LBAs_Written "
}, },
{ "Apacer AS340/350 SSDs", { "Apacer AS340 SSDs",
"Apacer AS3[45]0 ((12[08]|240|256|480|512|960)G|1T)B", // tested with "Apacer AS340 (120|240|480|960)GB", // tested with Apacer AS340 120GB/AP612PE0
// Apacer AS340 120GB/AP612PE0, Apacer AS350 1TB/AP613PE0
"", "", "", "",
//"-v 9,raw24(raw8),Power_On_Hours " //"-v 9,raw24(raw8),Power_On_Hours "
//"-v 12,raw48,Power_Cycle_Count " //"-v 12,raw48,Power_Cycle_Count "
@ -245,10 +244,8 @@ const drive_settings builtin_knowndrives[] = {
}, },
{ "Apacer SSDs", { "Apacer SSDs",
"([1248]|1[056]|20|3[02]|40|60|64|80|12[08]|160|240|256|320|480|512|640|960|1024|1280|1920|2048|3840|4096)(GB|TB) SATA Flash Drive|" "([1248]|1[056]|20|3[02]|40|60|64|80|12[08]|160|240|256|320|480|512|640|960|1024|1280|1920|2048|3840|4096)(GB|TB) SATA Flash Drive|"
"1TB SATA SSD|" // tested with 1TB SATA SSD/AP613PE0 (AP1TPPSS25-R) "S[GHTV]250-(M2[48][02]|25) ([1248]|1[056]|20|3[02]|40|60|64|80|12[08]|160|240|256|320|480|512|640|960|1024|1280|1920|2048|3840|4096)(GB|TB) SSD", // tested with 120GB SATA Flash Drive/SFMB6130, SH250-M242 128GB SSD/SFMB8120, ST250-M280 256GB SSD/SFMD6110
"S[GHTV]250-(M2[48][02]|25) ([1248]|1[056]|20|3[02]|40|60|64|80|12[08]|160|240|256|320|480|512|640|960|1024|1280|1920|2048|3840|4096)(GB|TB) SSD", "SFM[BCDEGHJ][0-9A-Z][0-9A-Z][1-9A-Z][0-9A-Z]",
// tested with 120GB SATA Flash Drive/SFMB6130, SH250-M242 128GB SSD/SFMB8120, ST250-M280 256GB SSD/SFMD6110
"AP613PE0|SFM[BCDEGHJ][0-9A-Z][0-9A-Z][1-9A-Z][0-9A-Z]",
"", "",
//"-v 9,raw24(raw8),Power_On_Hours " //"-v 9,raw24(raw8),Power_On_Hours "
//"-v 12,raw48,Power_Cycle_Count " //"-v 12,raw48,Power_Cycle_Count "
@ -290,9 +287,8 @@ const drive_settings builtin_knowndrives[] = {
//"-v 199,raw48,UDMA_CRC_Error_Count " //"-v 199,raw48,UDMA_CRC_Error_Count "
//"-v 240,raw48,Unknown_SSD_Attribute " //"-v 240,raw48,Unknown_SSD_Attribute "
}, },
{ "ATP SATA III aMLC M.2 2242/80 Embedded SSDs", { "ATP SATA III aMLC M.2 2242 Embedded SSD",
"ATP I-Temp M\\.2 22(42|80)", // tested with ATP I-Temp M.2 2242/R0822A, "ATP I-Temp M\\.2 2242", // tested with ATP I-Temp M.2 2242/R0822A
// ATP I-Temp M.2 2280/R0822A
"","", "","",
"-v 1,raw48,Raw_Read_Error_Count " "-v 1,raw48,Raw_Read_Error_Count "
//"-v 5,raw16(raw16),Reallocated_Sector_Ct " //"-v 5,raw16(raw16),Reallocated_Sector_Ct "
@ -328,8 +324,6 @@ const drive_settings builtin_knowndrives[] = {
{ "Crucial/Micron RealSSD C300/P300", // Marvell 88SS9174 { "Crucial/Micron RealSSD C300/P300", // Marvell 88SS9174
"C300-CTFDDA[AC](064|128|256)MAG|" // tested with C300-CTFDDAC128MAG/0002, "C300-CTFDDA[AC](064|128|256)MAG|" // tested with C300-CTFDDAC128MAG/0002,
// C300-CTFDDAC064MAG/0006 // C300-CTFDDAC064MAG/0006
"(C300-)?MTFDBAK(064|128|256)MAG(-1G1)?|" // tested with
// C300-MTFDBAK128MAG/0006 (attr 9 only), MTFDBAK256MAG-1G1/0007
"P300-MTFDDAC(050|100|200)SAL", // tested with P300-MTFDDAC100SAL/0003 "P300-MTFDDAC(050|100|200)SAL", // tested with P300-MTFDDAC100SAL/0003
"", "", "", "",
//"-v 1,raw48,Raw_Read_Error_Rate " //"-v 1,raw48,Raw_Read_Error_Rate "
@ -518,8 +512,7 @@ const drive_settings builtin_knowndrives[] = {
{ "Micron 5100 / 52x0 / 5300 / 5400 SSDs", { "Micron 5100 / 52x0 / 5300 / 5400 SSDs",
"(Micron_5100_)?(EE|MT)FDDA[KV](240|480|960|1T9|3T8|7T6)T(BY|CB|CC)|" // Matches both stock and Dell OEM "(Micron_5100_)?(EE|MT)FDDA[KV](240|480|960|1T9|3T8|7T6)T(BY|CB|CC)|" // Matches both stock and Dell OEM
// tested with Micron_5100_MTFDDAK3T8TCB/D0MU410, MTFDDAK3T8TCB/D0MU410 // tested with Micron_5100_MTFDDAK3T8TCB/D0MU410, MTFDDAK3T8TCB/D0MU410
"(Micron_5200_)?MTFDDAK(240|480|960|1T9|3T8|7T6)TD(C|D|N)|" // tested with Micron_5200_MTFDDAK240TDN/D1MU005, "(Micron_5200_)?MTFDDAK(480|960|1T9|3T8|7T6)TD(C|D|N)|" // tested with Micron_5200_MTFDDAK3T8TDD/D1MU505
// Micron_5200_MTFDDAK3T8TDD/D1MU505
"Micron_5210_MTFDDAK(480|960|1T9|3T8|7T6)QDE|" // tested with Micron_5210_MTFDDAK7T6QDE/D2MU804 "Micron_5210_MTFDDAK(480|960|1T9|3T8|7T6)QDE|" // tested with Micron_5210_MTFDDAK7T6QDE/D2MU804
"Micron_5300(HC)?_MTFDDA[KV](240|480|960|1T9|3T8|7T6)TD[STU]|" // tested with Micron_5300_MTFDDAK1T9TDS/D3MU001 "Micron_5300(HC)?_MTFDDA[KV](240|480|960|1T9|3T8|7T6)TD[STU]|" // tested with Micron_5300_MTFDDAK1T9TDS/D3MU001
// Micron_5300HC_MTFDDAK960TDS/D3MN010 // Micron_5300HC_MTFDDAK960TDS/D3MN010
@ -749,8 +742,7 @@ const drive_settings builtin_knowndrives[] = {
}, },
{ "Phison Driven SSDs", // see MKP_521_Phison_SMART_attribute.pdf { "Phison Driven SSDs", // see MKP_521_Phison_SMART_attribute.pdf
"BP4 mSATA SSD|" // MyDigital BP4, tested with BP4 mSATA SSD/S8FM06.9 "BP4 mSATA SSD|" // MyDigital BP4, tested with BP4 mSATA SSD/S8FM06.9
"Corsair Force LE(200)? SSD|" // tested with Corsair Force LE SSD/SAFC11.0, "Corsair Force LE200 SSD|" // tested with Corsair Force LE200 SSD/SBFM10, .../SBFM60.9
// Corsair Force LE200 SSD/SBFM10, .../SBFM60.9
"GIGABYTE GP-GSTFS31((120|240|256|480)G|100T)NTD|" // tested with GIGABYTE GP-GSTFS31120GNTD/SBFM61.3 "GIGABYTE GP-GSTFS31((120|240|256|480)G|100T)NTD|" // tested with GIGABYTE GP-GSTFS31120GNTD/SBFM61.3
"GOODRAM IRIDIUM PRO|" // tested with GOODRAM IRIDIUM PRO/SAFM01.5 "GOODRAM IRIDIUM PRO|" // tested with GOODRAM IRIDIUM PRO/SAFM01.5
"IRP?-SSDPR-S25[AC]-(120|240|256|480|512|960|0[12]T)|" // Goodram IRIDM (PRO), tested with "IRP?-SSDPR-S25[AC]-(120|240|256|480|512|960|0[12]T)|" // Goodram IRIDM (PRO), tested with
@ -777,13 +769,12 @@ const drive_settings builtin_knowndrives[] = {
// Silicon Motion controller (see ticket #801), tested with // Silicon Motion controller (see ticket #801), tested with
// KINGSTON SA400S37240G/SBFK10D7, KINGSTON SA400S37120G/SBFK71E0, */SBFKB1D1 // KINGSTON SA400S37240G/SBFK10D7, KINGSTON SA400S37120G/SBFK71E0, */SBFKB1D1
// KINGSTON SA400S37480G/SBFK10D7 (two spaces), KINGSTON SA400M8240G/SBFK61E1 // KINGSTON SA400S37480G/SBFK10D7 (two spaces), KINGSTON SA400M8240G/SBFK61E1
"Patriot (Blast|Blaze|Flare|Ignite)|" // tested with Patriot Blast/SAFM11.3, "Patriot (Blast|Blaze|Flare)|" // tested with Patriot Blast/SAFM11.3, Patriot Blaze/S9FM02,
// Patriot Blaze/S9FM02, Patriot Flare/SBFM91.2, Patriot Ignite/SAFM01.7 // Patriot Flare/SBFM91.2
"Patriot Burst( (120|240|480|960)GB)?|" // tested with Patriot Burst/SBFM11.2, "Patriot Burst( (120|240|480|960)GB)?|" // tested with Patriot Burst/SBFM11.2,
// Patriot Burst 480GB/SBFMLA.5 // Patriot Burst 480GB/SBFMLA.5
"PNY CS(900|1311|2211) (120|240|480|500|960)GB SSD|" // tested with PNY CS900 120GB SSD/CS900612, "PNY CS(900|1311|2211) (120|240|480|960)GB SSD|" // tested with PNY CS900 120GB SSD/CS900612,
// PNY CS900 240GB SSD/CS900613, PNY CS900 500GB SSD/CS900Y13, PNY CS1311 120GB SSD/CS131122, // PNY CS900 240GB SSD/CS900613, PNY CS1311 120GB SSD/CS131122, PNY CS2211 240GB SSD/CS221016
// PNY CS2211 240GB SSD/CS221016 (CS900 1TB has different attribute set)
"PNY ELITE PSSD|" // tested with PNY ELITE PSSD/CS105P13 (240G) "PNY ELITE PSSD|" // tested with PNY ELITE PSSD/CS105P13 (240G)
"SSD Smartbuy (60|64|120|128|240|256|480|512|960|1024|2000)GB|" // PS3111-S11, tested with "SSD Smartbuy (60|64|120|128|240|256|480|512|960|1024|2000)GB|" // PS3111-S11, tested with
// SSD Smartbuy 240GB/SBFM91.1, SSD Smartbuy 64GB/SBFM21.1 // SSD Smartbuy 240GB/SBFM91.1, SSD Smartbuy 64GB/SBFM21.1
@ -836,15 +827,14 @@ const drive_settings builtin_knowndrives[] = {
// weak information in the model. Detection is based on Firmware. // weak information in the model. Detection is based on Firmware.
{ "Phison Driven OEM SSDs", // see MKP_521_Phison_SMART_attribute.pdf { "Phison Driven OEM SSDs", // see MKP_521_Phison_SMART_attribute.pdf
"GOODRAM|" // tested with GOODRAM CX200 (GOODRAM/SAFM12.2) "GOODRAM|" // tested with GOODRAM CX200 (GOODRAM/SAFM12.2)
"Hoodisk SSD|" // tested with Hoodisk SSD/SBFM01.3, Hoodisk SSD/SBFMJ1.3 "Hoodisk SSD|" // tested with Hoodisk SSD/SBFM01.3
"INTENSO|" // tested with Intenso SSD SATA III Top (INTENSO/S9FM02.6, .../SAFM01.6) "INTENSO|" // tested with Intenso SSD SATA III Top (INTENSO/S9FM02.6, .../SAFM01.6)
"INTENSO SATA III SSD|" // tested with INTENSO SATA III SSD/SBFM11.2, .../SBFM81.3 "INTENSO SATA III SSD|" // tested with INTENSO SATA III SSD/SBFM11.2, .../SBFM81.3
"Kingmax SATA SSD (120|240|480|960)GB|" // tested with Kingmax SATA SSD 240GB/SBFMY1.3
"SATA SSD|" // tested with Supermicro SSD-DM032-PHI (SATA SSD/S9FM02.1), "SATA SSD|" // tested with Supermicro SSD-DM032-PHI (SATA SSD/S9FM02.1),
// PC Engines msata16d (SATA SSD/S9FM02.3), FoxLine flssd240x4s(SATA SSD/SBFM10.5) // PC Engines msata16d (SATA SSD/S9FM02.3), FoxLine flssd240x4s(SATA SSD/SBFM10.5)
"SPCC Solid State Disk", // Silicon Power, tested with SPCC Solid State Disk/SBFD00.3, "SPCC Solid State Disk", // Silicon Power, tested with SPCC Solid State Disk/SBFD00.3,
// SPCC Solid State Disk/SBFM61.2, SPCC Solid State Disk/SBFMT1.3 // SPCC Solid State Disk/SBFM61.2, SPCC Solid State Disk/SBFMT1.3
"S[89AB]F[DM][0-9JTY][0-9]\\.[0-9]", "S[89AB]F[DM][0-9T][0-9]\\.[0-9]",
"", "",
//"-v 1,raw48,Raw_Read_Error_Rate " //"-v 1,raw48,Raw_Read_Error_Rate "
"-v 2,raw48,Not_In_Use " "-v 2,raw48,Not_In_Use "
@ -1400,10 +1390,10 @@ const drive_settings builtin_knowndrives[] = {
"-v 249,raw48,NAND_Writes_1GiB" "-v 249,raw48,NAND_Writes_1GiB"
}, },
{ "Intel 53x and Pro 1500/2500 Series SSDs", // SandForce SF-2281, tested with { "Intel 53x and Pro 1500/2500 Series SSDs", // SandForce SF-2281, tested with
// INTEL SSDSC2BW180A4/DC12, INTEL SSDSC2BW240A4/DC12, INTEL SSDMCEAW120A4/DC33, // INTEL SSDSC2BW180A4/DC12, SSDSC2BW240A4/DC12, SSDMCEAW120A4/DC33
// INTEL SSDMCEAW240A4/DC33, INTEL SSDSC2BF180A4H/LH6i, INTEL SSDSC2BF480A5/TG26, // INTEL SSDMCEAW240A4/DC33, SSDSC2BF480A5/TG26, SSDSC2BW240H6/RG21
// INTEL SSDSC2BF240A5L/LT2i, INTEL SSDSC2BW240H6/RG21 // INTEL SSDSC2BF180A4H/LH6i
"INTEL SSD(MCEA|SC2B|SCKJ)[WF](056|080|120|180|240|360|480)(A4H?|A5L?|H6)", "INTEL SSD(MCEA|SC2B|SCKJ)[WF](056|080|120|180|240|360|480)(A4H?|A5|H6)",
// SC2B = 2.5", MCEA = mSATA, SCKJ = M.2; A4 = 530/Pro 1500, A5 = Pro 2500, H6 = 535 // SC2B = 2.5", MCEA = mSATA, SCKJ = M.2; A4 = 530/Pro 1500, A5 = Pro 2500, H6 = 535
"", "", "", "",
//"-v 5,raw16(raw16),Reallocated_Sector_Ct " //"-v 5,raw16(raw16),Reallocated_Sector_Ct "
@ -1499,21 +1489,18 @@ const drive_settings builtin_knowndrives[] = {
// INTEL SSDSC2BB800G4T, SSDSC2BA200G3/5DV10250, SSDSC2BB080G6/G2010130, SSDSC2BX200G4/G2010110, // INTEL SSDSC2BB800G4T, SSDSC2BA200G3/5DV10250, SSDSC2BB080G6/G2010130, SSDSC2BX200G4/G2010110,
// INTEL SSDSC2BB016T6/G2010140, SSDSC2BX016T4/G2010140, SSDSC2BB150G7/N2010101, // INTEL SSDSC2BB016T6/G2010140, SSDSC2BX016T4/G2010140, SSDSC2BB150G7/N2010101,
// INTEL SSDSC2BB480H4/D2010380, INTEL SSDSC2BB240G4C/D201FJ14, INTEL SSDSC2BA800G3E/5DV10250 // INTEL SSDSC2BB480H4/D2010380, INTEL SSDSC2BB240G4C/D201FJ14, INTEL SSDSC2BA800G3E/5DV10250
"INTEL SSDSC(1N|2B)[ABPX]((080|100|120|150|160|200|240|300|400|480|600|800)[GH][3467][CERT]?|(012|016)T[46])|" "INTEL SSDSC(1N|2B)[ABPX]((080|100|120|150|160|200|240|300|400|480|600|800)[GH][3467][CERT]?|(012|016)T[46])",
// A = S3700, B*4 = S3500, B*6 = S3510, P = 730, X = S3610 // A = S3700, B*4 = S3500, B*6 = S3510, P = 730, X = S3610
// Dell ships drives with model of the form SSDSC2BB120G4R // Dell ships drives with model of the form SSDSC2BB120G4R
"VK000(120|240|480)GWSXF", // tested with VK000480GWSXF/HPG2 (HPE INTEL SSDSC2BB480G4)
"", "", "", "",
//"-v 3,raw16(avg16),Spin_Up_Time " //"-v 3,raw16(avg16),Spin_Up_Time "
//"-v 4,raw48,Start_Stop_Count " //"-v 4,raw48,Start_Stop_Count "
//"-v 5,raw16(raw16),Reallocated_Sector_Ct " //"-v 5,raw16(raw16),Reallocated_Sector_Ct "
//"-v 9,raw24(raw8),Power_On_Hours " //"-v 9,raw24(raw8),Power_On_Hours "
"-v 11,raw48,Unknown_Intel_Attribute " // VK000480GWSXF
//"-v 12,raw48,Power_Cycle_Count " //"-v 12,raw48,Power_Cycle_Count "
"-v 170,raw48,Available_Reservd_Space " "-v 170,raw48,Available_Reservd_Space "
"-v 171,raw48,Program_Fail_Count " "-v 171,raw48,Program_Fail_Count "
"-v 172,raw48,Erase_Fail_Count " "-v 172,raw48,Erase_Fail_Count "
"-v 173,raw48,Unknown_Intel_Attribute " // VK000480GWSXF
"-v 174,raw48,Unsafe_Shutdown_Count " "-v 174,raw48,Unsafe_Shutdown_Count "
"-v 175,raw16(raw16),Power_Loss_Cap_Test " "-v 175,raw16(raw16),Power_Loss_Cap_Test "
"-v 183,raw48,SATA_Downshift_Count " "-v 183,raw48,SATA_Downshift_Count "
@ -1890,8 +1877,7 @@ const drive_settings builtin_knowndrives[] = {
// Samsung SSD 860 EVO 250GB/RVT01B6Q, Samsung SSD 860 EVO mSATA 250GB/RVT41B6Q, // Samsung SSD 860 EVO 250GB/RVT01B6Q, Samsung SSD 860 EVO mSATA 250GB/RVT41B6Q,
// Samsung SSD 860 EVO 500GB/RVT01B6Q, Samsung SSD 860 EVO mSATA 500GB/RVT41B6Q, // Samsung SSD 860 EVO 500GB/RVT01B6Q, Samsung SSD 860 EVO mSATA 500GB/RVT41B6Q,
// Samsung SSD 860 EVO mSATA 1TB/RVT41B6Q, Samsung SSD 860 EVO 2TB/RVT01B6Q, // Samsung SSD 860 EVO mSATA 1TB/RVT41B6Q, Samsung SSD 860 EVO 2TB/RVT01B6Q,
// Samsung SSD 860 EVO 4TB/RVT04B6Q, Samsung SSD 870 EVO 1TB/SVT01B6Q, // Samsung SSD 860 EVO 4TB/RVT04B6Q, Samsung SSD 870 EVO 1TB/SVT01B6Q
// Samsung SSD 870 EVO 4TB/SVT02B6Q
"Samsung SSD 8[56]0 PRO ((128|256|512)G|[124]T)B|" // tested with Samsung SSD 850 PRO 128GB/EXM01B6Q, "Samsung SSD 8[56]0 PRO ((128|256|512)G|[124]T)B|" // tested with Samsung SSD 850 PRO 128GB/EXM01B6Q,
// Samsung SSD 850 PRO 1TB/EXM01B6Q, Samsung SSD 850 PRO 2TB/EXM02B6Q, // Samsung SSD 850 PRO 1TB/EXM01B6Q, Samsung SSD 850 PRO 2TB/EXM02B6Q,
// Samsung SSD 860 PRO 256GB/RVM01B6Q, Samsung SSD 860 PRO 512GB/RVM01B6Q, // Samsung SSD 860 PRO 256GB/RVM01B6Q, Samsung SSD 860 PRO 512GB/RVM01B6Q,
@ -1927,7 +1913,6 @@ const drive_settings builtin_knowndrives[] = {
"SAMSUNG MZ7L3(240|480|960|1T9|3T8|7T6)H(B[LN][AT]|CHQ|CJR)-.*|" // PM893/897, tested with "SAMSUNG MZ7L3(240|480|960|1T9|3T8|7T6)H(B[LN][AT]|CHQ|CJR)-.*|" // PM893/897, tested with
// SAMSUNG MZ7L3240HCHQ-00A07/JXTC104Q, SAMSUNG MZ7L3480HCHQ-00A07/JXTC104Q, // SAMSUNG MZ7L3240HCHQ-00A07/JXTC104Q, SAMSUNG MZ7L3480HCHQ-00A07/JXTC104Q,
// SAMSUNG MZ7L3480HBLT-00A07/JXTE004Q, SAMSUNG MZ7L33T8HBLT-00A07/JXTC104Q // SAMSUNG MZ7L3480HBLT-00A07/JXTE004Q, SAMSUNG MZ7L33T8HBLT-00A07/JXTC104Q
"MK000(240|480|960)GZXRB|" // MK000960GZXRB/HPG0 (HPE MZ7L3960HBLT-00AH3)
"SAMSUNG MZ7KH(240|480|960|1T9|3T8)HA(HQ|JR|LS)-.*|" //SM883 "SAMSUNG MZ7KH(240|480|960|1T9|3T8)HA(HQ|JR|LS)-.*|" //SM883
"SAMSUNG MZ[7N](LF|TY)(128|192|256)H[CD](GS|HP)-.*|" // CM871/871a, tested with SAMSUNG MZNLF128HCHP-000H1/FXT21H1Q, "SAMSUNG MZ[7N](LF|TY)(128|192|256)H[CD](GS|HP)-.*|" // CM871/871a, tested with SAMSUNG MZNLF128HCHP-000H1/FXT21H1Q,
// SAMSUNG MZNTY256HDHP-000/MAT21K0Q, SAMSUNG MZ7LF192HCGS-000L1/FXT03L1Q // SAMSUNG MZNTY256HDHP-000/MAT21K0Q, SAMSUNG MZ7LF192HCGS-000L1/FXT03L1Q
@ -1984,8 +1969,7 @@ const drive_settings builtin_knowndrives[] = {
"-v 247,raw48,Timed_Workld_Timer " // PM863, PM893 "-v 247,raw48,Timed_Workld_Timer " // PM863, PM893
"-v 249,raw48,NAND_Writes_1GiB " // CM871a, PM871 "-v 249,raw48,NAND_Writes_1GiB " // CM871a, PM871
"-v 250,raw48,SATA_Iface_Downshift " // from the spec "-v 250,raw48,SATA_Iface_Downshift " // from the spec
"-v 251,raw48,NAND_Writes " // PM863, PM893 "-v 251,raw48,NAND_Writes" // PM863, PM893
"-v 252,raw48,Added_Bad_Flash_Blk_Ct" // 870 EVO FW SVT02B6Q
}, },
{ "Marvell based SanDisk SSDs", { "Marvell based SanDisk SSDs",
"SanDisk SD5SG2[0-9]*G1052E|" // X100 (88SS9174), tested with SanDisk SD5SG2256G1052E/10.04.01 "SanDisk SD5SG2[0-9]*G1052E|" // X100 (88SS9174), tested with SanDisk SD5SG2256G1052E/10.04.01
@ -2126,10 +2110,9 @@ const drive_settings builtin_knowndrives[] = {
}, },
{ "Silicon Motion based SSDs", { "Silicon Motion based SSDs",
"ADATA_IMSS332-((008|016|032|064|128|256|512)G|001T)[AEMT]P?|" // tested with ADATA_IMSS332-128GTP/Q0810B "ADATA_IMSS332-((008|016|032|064|128|256|512)G|001T)[AEMT]P?|" // tested with ADATA_IMSS332-128GTP/Q0810B
"ADATA (SP550|SU(630|650(NS38)?|655|[89]00))|" // tested with ADATA SP550/O0803B5a, ADATA SU630/S1127B0, "ADATA (SP550|SU(650(NS38)?|655|[89]00))|" // tested with ADATA SP550/O0803B5a, ADATA SU650/S0212B0,
// ADATA SU650/S0212B0, ADATA SU650/V8X01c45, ADATA SU650/V8X21c64, ADATA SU650NS38/P191202a, // ADATA SU650/V8X01c45, ADATA SU650/V8X21c64, ADATA SU650NS38/P191202a, ADATA SU655/V8X01c55,
// ADATA SU655/V8X01c55, ADATA SU800/Q0913A, ADATA SU800/R0427A, ADATA SU800/R0918B, ADATA SU900/Q0125A, // ADATA SU800/Q0913A, ADATA SU800/R0427A, ADATA SU800/R0918B, ADATA SU900/Q0125A, ADATA SU900/Q0710B
// ADATA SU900/Q0710B
"CORSAIR FORCE LX SSD|" // tested with CORSAIR FORCE LX SSD/N0307A "CORSAIR FORCE LX SSD|" // tested with CORSAIR FORCE LX SSD/N0307A
"CHN mSATAM3 (128|256|512)|" // Zheino M3, tested with CHN mSATAM3 128/Q1124A0 "CHN mSATAM3 (128|256|512)|" // Zheino M3, tested with CHN mSATAM3 128/Q1124A0
"CIS 2S M305 (16|32|64|128|256)GB|" // Ceroz M305, tested with CIS 2S M305 64GB/P0316B "CIS 2S M305 (16|32|64|128|256)GB|" // Ceroz M305, tested with CIS 2S M305 64GB/P0316B
@ -2146,18 +2129,14 @@ const drive_settings builtin_knowndrives[] = {
"KingSpec KSD-[PS]A25\\.[1-9]-(016|032|064|128)(MS|SJ)|" // tested with KingSpec KSD-PA25.6-064MS/20140803 "KingSpec KSD-[PS]A25\\.[1-9]-(016|032|064|128)(MS|SJ)|" // tested with KingSpec KSD-PA25.6-064MS/20140803
"KINGSTON SKC600(MS)?(256|512|1024|2048)G|" // KC600 MS=mSATA, tested with KINGSTON SKC600256G/S4500105, "KINGSTON SKC600(MS)?(256|512|1024|2048)G|" // KC600 MS=mSATA, tested with KINGSTON SKC600256G/S4500105,
// KINGSTON SKC600MS256G/S4500107 // KINGSTON SKC600MS256G/S4500107
"LITEON L[CM]H-(128|256|512)V2[MS](-.*)?|" // tested with LITEON LCH-256V2S-HP/2C02, "LITEON LMH-(128|256|512)V2M-.*|" // tested with LITEON LMH-256V2M-11 MSATA 256GB/FM8110C
// LITEON LCH-256V2S/3C87901, LITEON LMH-256V2M-11 MSATA 256GB/FM8110C "LITEON LCH-(128|256V|512)2S-.*|" // tested with LITEON LCH-256V2S-HP/2C02
"MKNSSDRE((25[06]|500|512)G|[12]T)B(-LT)?|" // Mushkin, tested with MKNSSDRE256GB/N1007C, "MKNSSDRE(1TB|2TB|512GB|500GB|256GB|250GB)|" // tested with MKNSSDRE256GB/N1007C
// MKNSSDRE250GB-LT/O1026A
"MKNSSD(S2|TR)(12[08]|2[45]0|480|500)GB(-(3DL|LT))?|" // Mushkin, tested with MKNSSDS2500GB/T0818A0, "MKNSSD(S2|TR)(12[08]|2[45]0|480|500)GB(-(3DL|LT))?|" // Mushkin, tested with MKNSSDS2500GB/T0818A0,
// MKNSSDTR500GB/O1126A, MKNSSDTR128GB-3DL/Q0616B0 // MKNSSDTR500GB/O1126A, MKNSSDTR128GB-3DL/Q0616B0
"NFN025SA31T-.*|" // Neo Forza (?), from HP Laptop, tested with NFN025SA31T-6000000/S0628A0 "NFN025SA31T-.*|"// Neo Forza (?), from HP Laptop, tested with NFN025SA31T-6000000/S0628A0
"NFORCE (256|512)25 - SSZS13|" // Nextron NForce, tested with NFORCE 25625 - SSZS13/V0915A0
"ONDA S-12 64GB|" // tested with ONDA S-12 64GB/U0401A0
"OWC Envoy Pro|" // tested with OWC Envoy Pro/R0522A0 (0x1e91:0xa2a5) "OWC Envoy Pro|" // tested with OWC Envoy Pro/R0522A0 (0x1e91:0xa2a5)
"Patriot P2[01]0 ((128|256|512)GB|[12]TB)|" // tested with Patriot P200 256GB/S1022A0, "Patriot P200 ((128|256|512)GB|[12]TB)|" // tested with Patriot P200 256GB/S1022A0
// Patriot P210 256GB/HPS2227P
"R3SL(120|240|480|960)G|" // AMD Radeon SSDs, tested with R3SL240G/P0422C "R3SL(120|240|480|960)G|" // AMD Radeon SSDs, tested with R3SL240G/P0422C
"Ramsta SSD S800 (120|240|480)GB|" // SM2258G, tested with Ramsta SSD S800 480GB/RS81V0 "Ramsta SSD S800 (120|240|480)GB|" // SM2258G, tested with Ramsta SSD S800 480GB/RS81V0
"SED2QII-LP SATA SSD ((64|128|256|512)GB|[12]TB)|" // ACPI SED2QII-LP, tested with "SED2QII-LP SATA SSD ((64|128|256|512)GB|[12]TB)|" // ACPI SED2QII-LP, tested with
@ -2259,26 +2238,24 @@ const drive_settings builtin_knowndrives[] = {
"240GB|" // from Lenovo T430 Thinkpad, tested with 240GB/P0510E "240GB|" // from Lenovo T430 Thinkpad, tested with 240GB/P0510E
"Dogfish SSD (128|256|512)GB|" // tested with Dogfish SSD 128GB/S1211A0 "Dogfish SSD (128|256|512)GB|" // tested with Dogfish SSD 128GB/S1211A0
"GIM(16|32|64|128|256|512)|"// GUDGA GIM, tested with GIM128/U0401A0 "GIM(16|32|64|128|256|512)|"// GUDGA GIM, tested with GIM128/U0401A0
"INTENSO( SSD)?|" // tested with INTENSO/S1211A0 (Portable SSD 256GB premium edition), "INTENSO|" // tested with INTENSO/S1211A0 (Portable SSD 256GB premium edition)
// INTENSO/V0609A0, INTENSO SSD/V0823A0 "Intenso SSD|" // tested with Intenso SSD/Q1107A0
"Intenso ?SSD( Sata III)?|" // tested with Intenso SSD/Q1107A0, Intenso SSD Sata III/P0510E, "Intenso ?SSD Sata III|" // Sata III High, tested with Intenso SSD Sata III/P0510E,
// Intenso SSD Sata III/R0817B0, Intenso SSD Sata III/V0303B0 // Intenso SSD Sata III/R0817B0
"KingFast|" // tested with KingFast/P0725A (F6M), KingFast/S0424A0 (120GB), KingFast/S1128B0 (512GB) "KingFast|" // tested with KingFast/P0725A (F6M), KingFast/S0424A0 (120GB), KingFast/S1128B0 (512GB)
"KSM512|" // KingSpec, tested with KSM512/S0509A0 "KSM512|" // KingSpec, tested with KSM512/S0509A0
"LDLC|" // tested with LDLC/KFS03005 "LDLC|" // tested with LDLC/KFS03005
"Netac MobileDataStar|" // tested with Netac MobileDataStar/HPS2227I (0x0dd8:0x0562)
"ORTIAL SSD|" // tested with ORTIAL SSD/U0202A0 (128GB) "ORTIAL SSD|" // tested with ORTIAL SSD/U0202A0 (128GB)
"RX7 (240|256|512)G|" // tested with RX7 240G/T0910A0 "RX7 (240|256|512)G|" // tested with RX7 240G/T0910A0
"SATA3 ((12[08]|240|256|480)G|[12]T)B SSD|" // TCSUNBOW X3, tested with SATA3 240GB SSD/S0618A0, "SATA3 ((12[08]|240|256|480)G|[12]T)B SSD|" // TCSUNBOW X3, tested with SATA3 240GB SSD/S0618A0,
// SATA3 1TB SSD/S1230A0, // SATA3 1TB SSD/S1230A0,
// KingDian S370, tested with SATA3 128GB SSD/T0311A0, SATA3 256GB SSD/S1127B0 // KingDian S370, tested with SATA3 128GB SSD/T0311A0, SATA3 256GB SSD/S1127B0
// KingDian S280, tested with SATA3 240GB SSD/T0519A0 // KingDian S280, tested with SATA3 240GB SSD/T0519A0
"SPCC M\\.2 SSD|" // Silicon Power A/M55, tested with SPCC M.2 SSD/Q0627A0, SPCC M.2 SSD/U0506A0 "SPCC M\\.2 SSD|" // Silicon Power 2280 M55, tested with SPCC M.2 SSD/Q0627A0
"T-FORCE (128|256|512)GB|" // tested with T-FORCE 512GB/T0910A0 "T-FORCE (128|256|512)GB|" // tested with T-FORCE 512GB/T0910A0
"Verbatim Vi550 S3", // may also exist with different controller (tickets #1626 <> #1629), "Verbatim Vi550 S3", // may also exist with different controller (tickets #1626 <> #1629),
// tested with Verbatim Vi550 S3/U1124A0 (128GB) // tested with Verbatim Vi550 S3/U1124A0 (256GB)
"HPS2227I|KFS03005|P0510E|P0725A|Q(0627|1107)A0|R0817B0|S(0424|0509|0618|1211|1230)A0|" "KFS03005|P0510E|P0725A|Q(0627|1107)A0|R0817B0|S(0424|0509|0618|1211|1230)A0|S112[78]B0|T0(311|519|910)A0|U(0202|0401|1124)A0",
"S112[78]B0|T0(311|519|910)A0|U(0202|0401|0506|1124)A0|V0((606|823)A|303B)0",
"", "",
"-v 148,raw48,Total_SLC_Erase_Ct " "-v 148,raw48,Total_SLC_Erase_Ct "
"-v 149,raw48,Max_SLC_Erase_Ct " "-v 149,raw48,Max_SLC_Erase_Ct "
@ -2939,7 +2916,6 @@ const drive_settings builtin_knowndrives[] = {
"SK ?hynix (SC(210|300|308|311|313|401)|SH920) .*|" // tested with "SK ?hynix (SC(210|300|308|311|313|401)|SH920) .*|" // tested with
// SK hynix SC210 mSATA 256GB/20002L00, // SK hynix SC210 mSATA 256GB/20002L00,
// SKhynix SC300 HFS256G32MND-3210A/20131P00, // SKhynix SC300 HFS256G32MND-3210A/20131P00,
// SK hynix SC308 SATA 256GB/30000P10,
// SK hynix SC308 SATA 128GB/30001P10, // SK hynix SC308 SATA 128GB/30001P10,
// SK hynix SC311 SATA 512GB/70000P10, // SK hynix SC311 SATA 512GB/70000P10,
// SK hynix SC313 HFS256G32TNF-N3A0A/70000P10, // SK hynix SC313 HFS256G32TNF-N3A0A/70000P10,
@ -2952,6 +2928,7 @@ const drive_settings builtin_knowndrives[] = {
// HFS512G39MND-3510A/20400P00 // HFS512G39MND-3510A/20400P00
"HFS(128|256|512)G39TND-N210A|" // SC308, tested with HFS128G39TND-N210A/30001P10 "HFS(128|256|512)G39TND-N210A|" // SC308, tested with HFS128G39TND-N210A/30001P10
"HFS(120|250|500)G32TND-N1A2A|" // SL308, tested with HFS500G32TND-N1A2A/30000P10 "HFS(120|250|500)G32TND-N1A2A|" // SL308, tested with HFS500G32TND-N1A2A/30000P10
"HFS(128|256|512)G39TND-N210A|" // SC308, tested with HFS128G39TND-N210A/30001P10
"HFS(128|256|512)G32TNF-N3A0A|" // SC313, tested with HFS256G32TNF-N3A0A/70000P10 "HFS(128|256|512)G32TNF-N3A0A|" // SC313, tested with HFS256G32TNF-N3A0A/70000P10
"SHGS31-(250|500|1000)GS-2", // S31, tested with SHGS31-1000GS-2/90000Q00 "SHGS31-(250|500|1000)GS-2", // S31, tested with SHGS31-1000GS-2/90000Q00
"", "", "", "",
@ -2989,12 +2966,12 @@ const drive_settings builtin_knowndrives[] = {
"-v 212,raw48,Phy_Error_Count " "-v 212,raw48,Phy_Error_Count "
"-v 231,raw48,SSD_Life_Left " "-v 231,raw48,SSD_Life_Left "
"-v 234,raw48,Unknown_SK_hynix_Attrib " "-v 234,raw48,Unknown_SK_hynix_Attrib "
"-v 236,raw48,Unknown_SK_hynix_Attrib " // SC311, SC313 "-v 236,raw48,Unknown_SK_hynix_Attrib " // SC313
"-v 238,raw48,Unknown_SK_hynix_Attrib " // SC401 "-v 238,raw48,Unknown_SK_hynix_Attrib " // SC401
"-v 241,raw48,Total_Writes_GB " // SC31: ~GB, not GiB (#1517) "-v 241,raw48,Total_Writes_GB " // SC31: ~GB, not GiB (#1517)
"-v 242,raw48,Total_Reads_GB " "-v 242,raw48,Total_Reads_GB "
"-v 243,raw48,Total_Media_Writes " "-v 243,raw48,Total_Media_Writes "
"-v 249,raw48,NAND_Writes_GiB " // SC311, SC313 "-v 249,raw48,Unknown_SK_hynix_Attrib " // SC313
"-v 250,raw48,Read_Retry_Count " "-v 250,raw48,Read_Retry_Count "
}, },
{ "SK hynix SATA SSDs", { "SK hynix SATA SSDs",
@ -5297,10 +5274,10 @@ const drive_settings builtin_knowndrives[] = {
"-d usbjmicron" "-d usbjmicron"
}, },
{ "USB: Samsung Portable SSD T7; ASMedia ASM2362", { "USB: Samsung Portable SSD T7; ASMedia ASM2362",
"0x04e8:0x(4001|61fb)", // 0x61fb: T7 Shield "0x04e8:0x4001",
"", // 0x0100 "",
"", "",
"-d sntasmedia" "" // smartmontools >= r5168: -d sntasmedia
}, },
{ "USB: Samsung Story Station; ", { "USB: Samsung Story Station; ",
"0x04e8:0x5f0[56]", "0x04e8:0x5f0[56]",
@ -5901,13 +5878,6 @@ const drive_settings builtin_knowndrives[] = {
"", "",
"-d sat" "-d sat"
}, },
// Netac Technology
{ "USB: Netac Z Slim; ",
"0x0dd8:0x0562",
"", // 0x1101
"",
"-d sat"
},
// Cowon Systems, Inc. // Cowon Systems, Inc.
{ "USB: Cowon iAudio X5; ", { "USB: Cowon iAudio X5; ",
"0x0e21:0x0510", "0x0e21:0x0510",
@ -6179,11 +6149,11 @@ const drive_settings builtin_knowndrives[] = {
"-d sat" "-d sat"
}, },
// ASMedia // ASMedia
{ "USB: ; ASMedia ASM236x", // USB->PCIe (NVMe) { "USB: ; ASMedia ASM2362", // USB->PCIe (NVMe)
"0x174c:0x236[24]", "0x174c:0x2362",
"", "",
"", "",
"-d sntasmedia" "" // smartmontools >= r5168: -d sntasmedia
}, },
{ "USB: ; ASMedia", { "USB: ; ASMedia",
"0x174c:0x....", "0x174c:0x....",
@ -6191,13 +6161,6 @@ const drive_settings builtin_knowndrives[] = {
"", "",
"-d sat" "-d sat"
}, },
// ASMedia
{ "USB: ; ASMedia ASM1352-PM", // USB3->2xSATA
"0x174d:0x1352",
"", // 0x0100
"",
"-d sat"
},
// LucidPort // LucidPort
{ "USB: ; LucidPORT USB300", // RaidSonic ICY BOX IB-110StU3-B, Sharkoon SATA QuickPort H3 { "USB: ; LucidPORT USB300", // RaidSonic ICY BOX IB-110StU3-B, Sharkoon SATA QuickPort H3
"0x1759:0x500[02]", // 0x5000: USB 2.0, 0x5002: USB 3.0 "0x1759:0x500[02]", // 0x5000: USB 2.0, 0x5002: USB 3.0
@ -6447,13 +6410,6 @@ const drive_settings builtin_knowndrives[] = {
"", "",
"-d sat" "-d sat"
}, },
// Other World Computing
{ "USB: USB3 to SATA; ",
"0x7825:0xa2a4",
"", // 0x4101
"",
"-d sat"
},
// JMicron II // JMicron II
{ "USB: ; JMicron JMS566", { "USB: ; JMicron JMS566",
"0xa152:0xb566", "0xa152:0xb566",
@ -6461,13 +6417,6 @@ const drive_settings builtin_knowndrives[] = {
"", "",
"-d sat" "-d sat"
}, },
// 0xab12 (?)
{ "USB: ; JMicron JMS578",
"0xab12:0x34cd",
"", // 0x0405
"",
"-d sat"
},
// Logilink // Logilink
{ "USB: ; ", { "USB: ; ",
"0xabcd:0x610[34]", // 0x6103: LogiLink AU0028A V1.0 USB 3.0 to IDE & SATA Adapter "0xabcd:0x610[34]", // 0x6103: LogiLink AU0028A V1.0 USB 3.0 to IDE & SATA Adapter

@ -3,7 +3,7 @@
# Send mail # Send mail
if which mail >/dev/null 2>&1 if which mail >/dev/null 2>&1
then then
echo "$SMARTD_MESSAGE" | mail -s "$SMARTD_FAILTYPE" "$SMARTD_ADDRESS" echo "$SMARTD_FULLMESSAGE" | mail -s "$SMARTD_SUBJECT" "$SMARTD_ADDRESS"
fi fi
# Notify desktop user # Notify desktop user

@ -0,0 +1,32 @@
diff -up smartmontools-7.2/smartd.cpp.capnotify smartmontools-7.2/smartd.cpp
--- smartmontools-7.2/smartd.cpp.capnotify 2020-11-23 19:25:16.000000000 +0100
+++ smartmontools-7.2/smartd.cpp 2021-06-16 12:06:03.985526022 +0200
@@ -1020,6 +1020,8 @@ static void capabilities_drop_now()
capng_clear(CAPNG_SELECT_BOTH);
capng_updatev(CAPNG_ADD, (capng_type_t)(CAPNG_EFFECTIVE|CAPNG_PERMITTED),
CAP_SYS_ADMIN, CAP_MKNOD, CAP_SYS_RAWIO, -1);
+ capng_updatev(CAPNG_ADD, (capng_type_t)(CAPNG_BOUNDING_SET),
+ CAP_SETGID, CAP_SETUID, CAP_CHOWN, CAP_FOWNER, CAP_DAC_OVERRIDE, -1);
capng_apply(CAPNG_SELECT_BOTH);
}
@@ -1030,9 +1032,8 @@ static void capabilities_check_config(de
for (unsigned i = 0; i < configs.size(); i++) {
dev_config & cfg = configs[i];
if (!cfg.emailaddress.empty() || !cfg.emailcmdline.empty()) {
- PrintOut(LOG_INFO, "Device: %s, --capabilites is set, mail will be suppressed.\n",
+ PrintOut(LOG_INFO, "Device: %s, --capabilites is set, mail notification may not work.\n",
cfg.name.c_str());
- cfg.emailaddress.clear(); cfg.emailcmdline.clear();
}
}
}
@@ -1633,7 +1634,7 @@ static void Usage()
#ifdef HAVE_LIBCAP_NG
PrintOut(LOG_INFO," -C, --capabilities\n");
PrintOut(LOG_INFO," Drop unneeded Linux process capabilities.\n"
- " Warning: Mail notification does not work when used.\n\n");
+ " Warning: Mail notification may not work when used.\n\n");
#endif
PrintOut(LOG_INFO," -d, --debug\n");
PrintOut(LOG_INFO," Start smartd in debug mode\n\n");

@ -1,85 +0,0 @@
From da45fc39390208c30b3ba656ccfb478e217b7401 Mon Sep 17 00:00:00 2001
From: "Milan P. Gandhi" <mgandhi@redhat.com>
Date: Mon, 17 Oct 2022 14:23:54 +0530
Subject: [PATCH 1/3] scsiprint.cpp: Attempted fix to tickets 1272, 1331 and
1346: Log sub-page handling
---
smartmontools-7.1/scsiprint.cpp | 27 +++++++++++++++++----------
1 file changed, 17 insertions(+), 10 deletions(-)
diff --git a/smartmontools-7.1/scsiprint.cpp b/smartmontools-7.1/scsiprint.cpp
index 4c52268..1edb7c2 100644
--- a/smartmontools-7.1/scsiprint.cpp
+++ b/smartmontools-7.1/scsiprint.cpp
@@ -118,8 +118,10 @@ static void
scsiGetSupportedLogPages(scsi_device * device)
{
bool got_subpages = false;
- int k, bump, err, payload_len, num_unreported, num_unreported_spg;
- int payload_len_pg0_0 = 0;
+ int k, bump, err, resp_len, num_unreported, num_unreported_spg;
+ int resp_len_pg0_0 = 0;
+ int resp_len_pg0_ff = 0; /* in SPC-4, response length of supported
+ * log pages _and_ log subpages */
const uint8_t * up;
uint8_t sup_lpgs[LOG_RESP_LEN];
@@ -143,7 +145,7 @@ scsiGetSupportedLogPages(scsi_device * device)
(scsi_version <= SCSI_VERSION_HIGHEST)) {
/* unclear what code T10 will choose for SPC-6 */
memcpy(sup_lpgs, gBuf, LOG_RESP_LEN);
- payload_len_pg0_0 = sup_lpgs[3];
+ resp_len_pg0_0 = sup_lpgs[3];
if ((err = scsiLogSense(device, SUPPORTED_LPAGES, SUPP_SPAGE_L_SPAGE,
gBuf, LOG_RESP_LONG_LEN,
-1 /* just single not double fetch */))) {
@@ -160,33 +162,38 @@ scsiGetSupportedLogPages(scsi_device * device)
if (scsi_debugmode > 0)
pout("%s supported subpages is bad SPF=%u SUBPG=%u\n",
logSenRspStr, !! (0x40 & gBuf[0]), gBuf[2]);
- } else
+ } else {
+ resp_len_pg0_ff = sg_get_unaligned_be16(gBuf + 2);
got_subpages = true;
+ }
}
- } else
+ } else {
memcpy(sup_lpgs, gBuf, LOG_RESP_LEN);
+ resp_len_pg0_0 = sup_lpgs[3];
+ }
if (got_subpages) {
- payload_len = sg_get_unaligned_be16(gBuf + 2);
- if (payload_len <= payload_len_pg0_0) {
+ resp_len = sg_get_unaligned_be16(gBuf + 2);
+ if (resp_len_pg0_ff <= resp_len_pg0_0) {
/* something is rotten ....., ignore SUPP_SPAGE_L_SPAGE */
- payload_len = payload_len_pg0_0;
+ resp_len = resp_len_pg0_0;
bump = 1;
up = sup_lpgs + LOGPAGEHDRSIZE;
got_subpages = false;
(void)got_subpages; // not yet used below, suppress warning
} else {
+ resp_len = resp_len_pg0_ff;
bump = 2;
up = gBuf + LOGPAGEHDRSIZE;
}
} else {
- payload_len = payload_len_pg0_0;
+ resp_len = resp_len_pg0_0;
bump = 1;
up = sup_lpgs + LOGPAGEHDRSIZE;
}
num_unreported_spg = 0;
- for (num_unreported = 0, k = 0; k < payload_len; k += bump, up += bump) {
+ for (num_unreported = 0, k = 0; k < resp_len; k += bump, up += bump) {
uint8_t pg_num = 0x3f & up[0];
uint8_t sub_pg_num = (0x40 & up[0]) ? up[1] : 0;
--
2.35.1

@ -1,185 +0,0 @@
From b6064d5ba30ee355e71e7543fdb66ea99fcebae4 Mon Sep 17 00:00:00 2001
From: "Milan P. Gandhi" <mgandhi@redhat.com>
Date: Mon, 17 Oct 2022 14:24:42 +0530
Subject: [PATCH 2/3] scsiprint.cpp: Add 'Accumulated power on time' field to
'smartctl -a'
---
smartmontools-7.1/scsiprint.cpp | 82 ++++++++++++++++++++++-----------
1 file changed, 56 insertions(+), 26 deletions(-)
diff --git a/smartmontools-7.1/scsiprint.cpp b/smartmontools-7.1/scsiprint.cpp
index 1edb7c2..81bed88 100644
--- a/smartmontools-7.1/scsiprint.cpp
+++ b/smartmontools-7.1/scsiprint.cpp
@@ -120,7 +120,7 @@ scsiGetSupportedLogPages(scsi_device * device)
bool got_subpages = false;
int k, bump, err, resp_len, num_unreported, num_unreported_spg;
int resp_len_pg0_0 = 0;
- int resp_len_pg0_ff = 0; /* in SPC-4, response length of supported
+ int resp_len_pg0_ff = 0; /* in SPC-4, response length of supported
* log pages _and_ log subpages */
const uint8_t * up;
uint8_t sup_lpgs[LOG_RESP_LEN];
@@ -163,13 +163,13 @@ scsiGetSupportedLogPages(scsi_device * device)
pout("%s supported subpages is bad SPF=%u SUBPG=%u\n",
logSenRspStr, !! (0x40 & gBuf[0]), gBuf[2]);
} else {
- resp_len_pg0_ff = sg_get_unaligned_be16(gBuf + 2);
+ resp_len_pg0_ff = sg_get_unaligned_be16(gBuf + 2);
got_subpages = true;
- }
+ }
}
} else {
memcpy(sup_lpgs, gBuf, LOG_RESP_LEN);
- resp_len_pg0_0 = sup_lpgs[3];
+ resp_len_pg0_0 = sup_lpgs[3];
}
if (got_subpages) {
@@ -182,7 +182,7 @@ scsiGetSupportedLogPages(scsi_device * device)
got_subpages = false;
(void)got_subpages; // not yet used below, suppress warning
} else {
- resp_len = resp_len_pg0_ff;
+ resp_len = resp_len_pg0_ff;
bump = 2;
up = gBuf + LOGPAGEHDRSIZE;
}
@@ -1162,12 +1162,14 @@ static const char * reassign_status[] = {
// Returns 0 if ok else FAIL* bitmask. Note can have a status entry
// and up to 2048 events (although would hope to have less). May set
// FAILLOG if serious errors detected (in the future).
+// When only_pow_time is true only print "Accumulated power on time"
+// data, if available.
static int
-scsiPrintBackgroundResults(scsi_device * device)
+scsiPrintBackgroundResults(scsi_device * device, bool only_pow_time)
{
+ bool noheader = true;
+ bool firstresult = true;
int num, j, m, err, truncated;
- int noheader = 1;
- int firstresult = 1;
int retval = 0;
uint8_t * ucp;
static const char * hname = "Background scan results";
@@ -1188,9 +1190,12 @@ scsiPrintBackgroundResults(scsi_device * device)
// compute page length
num = sg_get_unaligned_be16(gBuf + 2) + 4;
if (num < 20) {
- print_on();
- pout("%s %s length is %d, no scan status\n", hname, logSenStr, num);
- print_off();
+ if (! only_pow_time) {
+ print_on();
+ pout("%s %s length is %d, no scan status\n", hname, logSenStr,
+ num);
+ print_off();
+ }
return FAILSMART;
}
truncated = (num > LOG_RESP_LONG_LEN) ? num : 0;
@@ -1205,22 +1210,32 @@ scsiPrintBackgroundResults(scsi_device * device)
switch (pc) {
case 0:
if (noheader) {
- noheader = 0;
- pout("%s log\n", hname);
+ noheader = false;
+ if (! only_pow_time)
+ pout("%s log\n", hname);
}
- pout(" Status: ");
+ if (! only_pow_time)
+ pout(" Status: ");
if ((pl < 16) || (num < 16)) {
- pout("\n");
+ if (! only_pow_time)
+ pout("\n");
break;
}
j = ucp[9];
- if (j < (int)(sizeof(bms_status) / sizeof(bms_status[0])))
- pout("%s\n", bms_status[j]);
- else
- pout("unknown [0x%x] background scan status value\n", j);
+ if (! only_pow_time) {
+ if (j < (int)(sizeof(bms_status) / sizeof(bms_status[0])))
+ pout("%s\n", bms_status[j]);
+ else
+ pout("unknown [0x%x] background scan status value\n", j);
+ }
j = sg_get_unaligned_be32(ucp + 4);
- pout(" Accumulated power on time, hours:minutes %d:%02d "
- "[%d minutes]\n", (j / 60), (j % 60), j);
+ pout("%sAccumulated power on time, hours:minutes %d:%02d",
+ (only_pow_time ? "" : " "), (j / 60), (j % 60));
+ if (only_pow_time) {
+ pout("\n");
+ break;
+ } else
+ pout(" [%d minutes]\n", j);
jglb["power_on_time"]["hours"] = j / 60;
jglb["power_on_time"]["minutes"] = j % 60;
pout(" Number of background scans performed: %d, ",
@@ -1232,9 +1247,12 @@ scsiPrintBackgroundResults(scsi_device * device)
break;
default:
if (noheader) {
- noheader = 0;
- pout("\n%s log\n", hname);
+ noheader = false;
+ if (! only_pow_time)
+ pout("\n%s log\n", hname);
}
+ if (only_pow_time)
+ break;
if (firstresult) {
firstresult = 0;
pout("\n # when lba(hex) [sk,asc,ascq] "
@@ -1262,10 +1280,11 @@ scsiPrintBackgroundResults(scsi_device * device)
num -= pl;
ucp += pl;
}
- if (truncated)
+ if (truncated && (! only_pow_time))
pout(" >>>> log truncated, fetched %d of %d available "
"bytes\n", LOG_RESP_LONG_LEN, truncated);
- pout("\n");
+ if (! only_pow_time)
+ pout("\n");
return retval;
}
@@ -2447,6 +2466,17 @@ scsiPrintMain(scsi_device * device, const scsi_print_options & options)
scsiGetSupportedLogPages(device);
if (gTempLPage)
scsiPrintTemp(device);
+ }
+ // in the 'smartctl -a" case only want: "Accumulated power on time"
+ if ((! options.smart_background_log) && is_disk) {
+ if (! checkedSupportedLogPages)
+ scsiGetSupportedLogPages(device);
+ res = 0;
+ if (gBackgroundResultsLPage)
+ res = scsiPrintBackgroundResults(device, true);
+ any_output = true;
+ }
+ if (options.smart_vendor_attrib) {
if (gStartStopLPage)
scsiGetStartStopData(device);
if (is_disk) {
@@ -2488,7 +2518,7 @@ scsiPrintMain(scsi_device * device, const scsi_print_options & options)
scsiGetSupportedLogPages(device);
res = 0;
if (gBackgroundResultsLPage)
- res = scsiPrintBackgroundResults(device);
+ res = scsiPrintBackgroundResults(device, false);
else {
pout("Device does not support Background scan results logging\n");
failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
--
2.35.1

@ -1,31 +0,0 @@
Index: trunk/smartmontools/scsiprint.cpp
===================================================================
--- smartmontools/scsiprint.cpp (revision 5076)
+++ smartmontools/scsiprint.cpp (revision 5090)
@@ -2340,6 +2340,6 @@
!wce ? "Disabled" : "Enabled");
}
- } else
any_output = true;
+ }
if (options.drive_info)
@@ -2463,12 +2463,10 @@
if (gTempLPage)
scsiPrintTemp(device);
- }
- // in the 'smartctl -a" case only want: "Accumulated power on time"
- if ((! options.smart_background_log) && is_disk) {
- if (! checkedSupportedLogPages)
- scsiGetSupportedLogPages(device);
- res = 0;
- if (gBackgroundResultsLPage)
- res = scsiPrintBackgroundResults(device, true);
+ // in the 'smartctl -A' case only want: "Accumulated power on time"
+ if ((! options.smart_background_log) && is_disk) {
+ res = 0;
+ if (gBackgroundResultsLPage)
+ res = scsiPrintBackgroundResults(device, true);
+ }
any_output = true;
}

@ -0,0 +1,38 @@
diff -up smartmontools-7.2/os_linux.cpp.permsfix smartmontools-7.2/os_linux.cpp
--- smartmontools-7.2/os_linux.cpp.permsfix 2021-11-02 22:08:51.956425716 +0100
+++ smartmontools-7.2/os_linux.cpp 2021-11-02 22:09:55.928583584 +0100
@@ -1022,7 +1022,7 @@ bool linux_aacraid_device::open()
return set_err(ENOENT, "aac entry not found in /proc/devices");
//Create misc device file in /dev/ used for communication with driver
- if(mknod(dev_name,S_IFCHR,makedev(mjr,aHost)))
+ if(mknod(dev_name,S_IFCHR|0600,makedev(mjr,aHost)))
return set_err(errno,"cannot create %s:%s",dev_name,strerror(errno));
afd = ::open(dev_name,O_RDWR);
@@ -1298,14 +1298,14 @@ bool linux_megaraid_device::open()
while (fgets(line, sizeof(line), fp) != NULL) {
int n1 = 0;
if (sscanf(line, "%d megaraid_sas_ioctl%n", &mjr, &n1) == 1 && n1 == 22) {
- n1=mknod("/dev/megaraid_sas_ioctl_node", S_IFCHR, makedev(mjr, 0));
+ n1=mknod("/dev/megaraid_sas_ioctl_node", S_IFCHR|0600, makedev(mjr, 0));
if(report > 0)
pout("Creating /dev/megaraid_sas_ioctl_node = %d\n", n1 >= 0 ? 0 : errno);
if (n1 >= 0 || errno == EEXIST)
break;
}
else if (sscanf(line, "%d megadev%n", &mjr, &n1) == 1 && n1 == 11) {
- n1=mknod("/dev/megadev0", S_IFCHR, makedev(mjr, 0));
+ n1=mknod("/dev/megadev0", S_IFCHR|0600, makedev(mjr, 0));
if(report > 0)
pout("Creating /dev/megadev0 = %d\n", n1 >= 0 ? 0 : errno);
if (n1 >= 0 || errno == EEXIST)
@@ -2970,7 +2970,7 @@ bool linux_smart_interface::get_dev_mega
n1=0;
if (sscanf(line, "%d megaraid_sas_ioctl%n", &mjr, &n1) == 1 && n1 == 22) {
scan_megasas = true;
- n1=mknod("/dev/megaraid_sas_ioctl_node", S_IFCHR, makedev(mjr, 0));
+ n1=mknod("/dev/megaraid_sas_ioctl_node", S_IFCHR|0600, makedev(mjr, 0));
if(scsi_debugmode > 0)
pout("Creating /dev/megaraid_sas_ioctl_node = %d\n", n1 >= 0 ? 0 : errno);
if (n1 >= 0 || errno == EEXIST)

@ -1,200 +0,0 @@
diff -up smartmontools-7.1/nvmecmds.cpp.r5121 smartmontools-7.1/nvmecmds.cpp
--- smartmontools-7.1/nvmecmds.cpp.r5121 2019-07-01 22:54:14.000000000 +0200
+++ smartmontools-7.1/nvmecmds.cpp 2023-11-22 12:56:02.927324622 +0100
@@ -3,7 +3,7 @@
*
* Home page of code is: https://www.smartmontools.org
*
- * Copyright (C) 2016-19 Christian Franke
+ * Copyright (C) 2016-20 Christian Franke
*
* SPDX-License-Identifier: GPL-2.0-or-later
*/
@@ -132,6 +132,7 @@ bool nvme_read_id_ctrl(nvme_device * dev
swapx(&id_ctrl.vid);
swapx(&id_ctrl.ssvid);
swapx(&id_ctrl.cntlid);
+ swapx(&id_ctrl.ver);
swapx(&id_ctrl.oacs);
swapx(&id_ctrl.wctemp);
swapx(&id_ctrl.cctemp);
@@ -181,30 +182,54 @@ bool nvme_read_id_ns(nvme_device * devic
return true;
}
-// Read NVMe log page with identifier LID.
-bool nvme_read_log_page(nvme_device * device, unsigned char lid, void * data,
- unsigned size, bool broadcast_nsid)
+static bool nvme_read_log_page_1(nvme_device * device, unsigned nsid,
+ unsigned char lid, void * data, unsigned size, unsigned offset = 0)
{
- if (!(4 <= size && size <= 0x4000 && (size % 4) == 0))
- throw std::logic_error("nvme_read_log_page(): invalid size");
+ if (!(4 <= size && size <= 0x1000 && !(size % 4) && !(offset % 4)))
+ return device->set_err(EINVAL, "Invalid NVMe log size %u or offset %u", size, offset);
memset(data, 0, size);
nvme_cmd_in in;
in.set_data_in(nvme_admin_get_log_page, data, size);
- in.nsid = broadcast_nsid ? 0xffffffff : device->get_nsid();
+ in.nsid = nsid;
in.cdw10 = lid | (((size / 4) - 1) << 16);
+ in.cdw12 = offset; // LPOL, NVMe 1.2.1
return nvme_pass_through(device, in);
}
+// Read NVMe log page with identifier LID.
+unsigned nvme_read_log_page(nvme_device * device, unsigned nsid, unsigned char lid,
+ void * data, unsigned size, bool nvme_121, unsigned offset /* = 0 */)
+{
+ unsigned n, bs;
+ for (n = 0; n < size; n += bs) {
+ if (!nvme_121 && offset + n > 0) {
+ device->set_err(ENOSYS, "Log Page Offset requires NVMe >= 1.2.1");
+ break;
+ }
+
+ // Limit transfer size to one page to avoid problems with
+ // limits of NVMe pass-through layer or too low MDTS values.
+ bs = size - n;
+ if (bs > 0x1000)
+ bs = 0x1000;
+ if (!nvme_read_log_page_1(device, nsid, lid, (char *)data + n, bs, offset + n))
+ break;
+ }
+
+ return n;
+}
+
// Read NVMe Error Information Log.
-bool nvme_read_error_log(nvme_device * device, nvme_error_log_page * error_log, unsigned num_entries)
+unsigned nvme_read_error_log(nvme_device * device, nvme_error_log_page * error_log,
+ unsigned num_entries, bool nvme_121)
{
- if (!nvme_read_log_page(device, 0x01, error_log, num_entries * sizeof(*error_log), true))
- return false;
+ unsigned n = nvme_read_log_page(device, 0xffffffff, 0x01, error_log,
+ num_entries * sizeof(*error_log), nvme_121);
if (isbigendian()) {
- for (unsigned i = 0; i < num_entries; i++) {
+ for (unsigned i = 0; i < n; i++) {
swapx(&error_log[i].error_count);
swapx(&error_log[i].sqid);
swapx(&error_log[i].cmdid);
@@ -215,13 +240,13 @@ bool nvme_read_error_log(nvme_device * d
}
}
- return true;
+ return n / sizeof(*error_log);
}
// Read NVMe SMART/Health Information log.
bool nvme_read_smart_log(nvme_device * device, nvme_smart_log & smart_log)
{
- if (!nvme_read_log_page(device, 0x02, &smart_log, sizeof(smart_log), true))
+ if (!nvme_read_log_page_1(device, 0xffffffff, 0x02, &smart_log, sizeof(smart_log)))
return false;
if (isbigendian()) {
diff -up smartmontools-7.1/nvmecmds.h.r5121 smartmontools-7.1/nvmecmds.h
--- smartmontools-7.1/nvmecmds.h.r5121 2019-07-01 22:54:14.000000000 +0200
+++ smartmontools-7.1/nvmecmds.h 2023-11-22 12:56:02.927324622 +0100
@@ -3,7 +3,7 @@
*
* Home page of code is: https://www.smartmontools.org
*
- * Copyright (C) 2016-19 Christian Franke
+ * Copyright (C) 2016-20 Christian Franke
*
* Original code from <linux/nvme.h>:
* Copyright (C) 2011-2014 Intel Corporation
@@ -236,12 +236,12 @@ bool nvme_read_id_ctrl(nvme_device * dev
bool nvme_read_id_ns(nvme_device * device, unsigned nsid, smartmontools::nvme_id_ns & id_ns);
// Read NVMe log page with identifier LID.
-bool nvme_read_log_page(nvme_device * device, unsigned char lid, void * data,
- unsigned size, bool broadcast_nsid);
+unsigned nvme_read_log_page(nvme_device * device, unsigned nsid, unsigned char lid,
+ void * data, unsigned size, bool nvme_121, unsigned offset = 0);
// Read NVMe Error Information Log.
-bool nvme_read_error_log(nvme_device * device, smartmontools::nvme_error_log_page * error_log,
- unsigned num_entries);
+unsigned nvme_read_error_log(nvme_device * device, smartmontools::nvme_error_log_page * error_log,
+ unsigned num_entries, bool nvme_121);
// Read NVMe SMART/Health Information log.
bool nvme_read_smart_log(nvme_device * device, smartmontools::nvme_smart_log & smart_log);
diff -up smartmontools-7.1/nvmeprint.cpp.r5121 smartmontools-7.1/nvmeprint.cpp
--- smartmontools-7.1/nvmeprint.cpp.r5121 2023-11-22 12:56:02.927324622 +0100
+++ smartmontools-7.1/nvmeprint.cpp 2023-11-22 13:00:34.472659814 +0100
@@ -524,6 +524,9 @@ int nvmePrintMain(nvme_device * device,
}
}
+ // Log Page Offset requires NVMe >= 1.2.1
+ bool nvme_121 = (id_ctrl.ver >= 0x10201);
+
// Print Error Information Log
if (options.error_log_entries) {
unsigned num_entries = id_ctrl.elpe + 1; // 0-based value
@@ -531,39 +534,47 @@ int nvmePrintMain(nvme_device * device,
nvme_error_log_page * error_log =
reinterpret_cast<nvme_error_log_page *>(error_log_buf.data());
- if (!nvme_read_error_log(device, error_log, num_entries)) {
+ unsigned read_entries = nvme_read_error_log(device, error_log, num_entries, nvme_121);
+ if (!read_entries) {
jerr("Read Error Information Log failed: %s\n\n", device->get_errmsg());
return retval | FAILSMART;
}
+ if (read_entries < num_entries)
+ jerr("Read Error Information Log failed, %u entries missing: %s\n",
+ num_entries - read_entries, device->get_errmsg());
- print_error_log(error_log, num_entries, options.error_log_entries);
+ print_error_log(error_log, read_entries, options.error_log_entries);
}
// Dump log page
if (options.log_page_size) {
// Align size to dword boundary
unsigned size = ((options.log_page_size + 4-1) / 4) * 4;
- bool broadcast_nsid;
raw_buffer log_buf(size);
+ unsigned nsid;
switch (options.log_page) {
case 1:
case 2:
case 3:
- broadcast_nsid = true;
+ nsid = 0xffffffff;
break;
default:
- broadcast_nsid = false;
+ nsid = device->get_nsid();
break;
}
- if (!nvme_read_log_page(device, options.log_page, log_buf.data(),
- size, broadcast_nsid)) {
+ unsigned read_bytes = nvme_read_log_page(device, nsid, options.log_page, log_buf.data(),
+ size, nvme_121);
+ if (!read_bytes) {
jerr("Read NVMe Log 0x%02x failed: %s\n\n", options.log_page, device->get_errmsg());
return retval | FAILSMART;
}
+ if (read_bytes < size)
+ jerr("Read NVMe Log 0x%02x failed, 0x%x bytes missing: %s\n",
+ options.log_page, size - read_bytes, device->get_errmsg());
- pout("NVMe Log 0x%02x (0x%04x bytes)\n", options.log_page, size);
- dStrHex(log_buf.data(), size, 0);
+ pout("NVMe Log 0x%02x (0x%04x bytes)\n", options.log_page, read_bytes);
+ dStrHex(log_buf.data(), read_bytes, 0);
pout("\n");
}

@ -1,312 +0,0 @@
diff -up smartmontools-7.1/dev_interface.cpp.r5471 smartmontools-7.1/dev_interface.cpp
--- smartmontools-7.1/dev_interface.cpp.r5471 2019-11-24 19:19:24.000000000 +0100
+++ smartmontools-7.1/dev_interface.cpp 2023-11-22 14:07:37.647756091 +0100
@@ -15,6 +15,7 @@
#include "dev_tunnelled.h"
#include "atacmds.h" // ATA_SMART_CMD/STATUS
#include "scsicmds.h" // scsi_cmnd_io
+#include "nvmecmds.h" // nvme_status_*()
#include "utility.h"
#include <errno.h>
@@ -235,12 +236,11 @@ bool scsi_device::scsi_pass_through_and_
bool nvme_device::set_nvme_err(nvme_cmd_out & out, unsigned status, const char * msg /* = 0 */)
{
- if (!status)
- throw std::logic_error("nvme_device: set_nvme_err() called with status=0");
-
out.status = status;
out.status_valid = true;
- return set_err(EIO, "%sNVMe Status 0x%02x", (msg ? msg : ""), status);
+ char buf[64];
+ return set_err(nvme_status_to_errno(status), "%s%s (0x%03x)", (msg ? msg : ""),
+ nvme_status_to_info_str(buf, status), status);
}
diff -up smartmontools-7.1/nvmecmds.cpp.r5471 smartmontools-7.1/nvmecmds.cpp
--- smartmontools-7.1/nvmecmds.cpp.r5471 2023-11-22 14:07:37.646756079 +0100
+++ smartmontools-7.1/nvmecmds.cpp 2023-11-22 14:07:37.648756102 +0100
@@ -258,3 +258,221 @@ bool nvme_read_smart_log(nvme_device * d
return true;
}
+
+// Return flagged error message for NVMe status SCT/SC fields or nullptr if unknown.
+// If message starts with '-', the status indicates an invalid command (EINVAL).
+static const char * nvme_status_to_flagged_str(uint16_t status)
+{
+ // Section 3.3.3.2.1 of NVM Express Base Specification Revision 2.0c, October 4, 2022
+ uint8_t sc = (uint8_t)status;
+ switch ((status >> 8) & 0x7) {
+ case 0x0: // Generic Command Status
+ if (sc < 0x80) switch (sc) {
+ case 0x00: return "Successful Completion";
+ case 0x01: return "-Invalid Command Opcode";
+ case 0x02: return "-Invalid Field in Command";
+ case 0x03: return "Command ID Conflict";
+ case 0x04: return "Data Transfer Error";
+ case 0x05: return "Commands Aborted due to Power Loss Notification";
+ case 0x06: return "Internal Error";
+ case 0x07: return "Command Abort Requested";
+ case 0x08: return "Command Aborted due to SQ Deletion";
+ case 0x09: return "Command Aborted due to Failed Fused Command";
+ case 0x0a: return "Command Aborted due to Missing Fused Command";
+ case 0x0b: return "-Invalid Namespace or Format";
+ case 0x0c: return "Command Sequence Error";
+ case 0x0d: return "-Invalid SGL Segment Descriptor";
+ case 0x0e: return "-Invalid Number of SGL Descriptors";
+ case 0x0f: return "-Data SGL Length Invalid";
+ case 0x10: return "-Metadata SGL Length Invalid";
+ case 0x11: return "-SGL Descriptor Type Invalid";
+ case 0x12: return "-Invalid Use of Controller Memory Buffer";
+ case 0x13: return "-PRP Offset Invalid";
+ case 0x14: return "Atomic Write Unit Exceeded";
+ case 0x15: return "Operation Denied";
+ case 0x16: return "-SGL Offset Invalid";
+ case 0x18: return "Host Identifier Inconsistent Format";
+ case 0x19: return "Keep Alive Timer Expired";
+ case 0x1a: return "-Keep Alive Timeout Invalid";
+ case 0x1b: return "Command Aborted due to Preempt and Abort";
+ case 0x1c: return "Sanitize Failed";
+ case 0x1d: return "Sanitize In Progress";
+ case 0x1e: return "SGL Data Block Granularity Invalid";
+ case 0x1f: return "Command Not Supported for Queue in CMB";
+ case 0x20: return "Namespace is Write Protected";
+ case 0x21: return "Command Interrupted";
+ case 0x22: return "Transient Transport Error";
+ case 0x23: return "Command Prohibited by Command and Feature Lockdown";
+ case 0x24: return "Admin Command Media Not Ready";
+ // 0x25-0x7f: Reserved
+ }
+ else switch (sc) {
+ // 0x80-0xbf: I/O Command Set Specific
+ case 0x80: return "LBA Out of Range";
+ case 0x81: return "Capacity Exceeded";
+ case 0x82: return "Namespace Not Ready";
+ case 0x83: return "Reservation Conflict";
+ case 0x84: return "Format In Progress";
+ case 0x85: return "-Invalid Value Size";
+ case 0x86: return "-Invalid Key Size";
+ case 0x87: return "KV Key Does Not Exist";
+ case 0x88: return "Unrecovered Error";
+ case 0x89: return "Key Exists";
+ // 0x90-0xbf: Reserved
+ // 0xc0-0xff: Vendor Specific
+ }
+ break;
+
+ case 0x1: // Command Specific Status
+ if (sc < 0x80) switch (sc) {
+ case 0x00: return "-Completion Queue Invalid";
+ case 0x01: return "-Invalid Queue Identifier";
+ case 0x02: return "-Invalid Queue Size";
+ case 0x03: return "Abort Command Limit Exceeded";
+ case 0x04: return "Abort Command Is Missing";
+ case 0x05: return "Asynchronous Event Request Limit Exceeded";
+ case 0x06: return "-Invalid Firmware Slot";
+ case 0x07: return "-Invalid Firmware Image";
+ case 0x08: return "-Invalid Interrupt Vector";
+ case 0x09: return "-Invalid Log Page";
+ case 0x0a: return "-Invalid Format";
+ case 0x0b: return "Firmware Activation Requires Conventional Reset";
+ case 0x0c: return "-Invalid Queue Deletion";
+ case 0x0d: return "Feature Identifier Not Saveable";
+ case 0x0e: return "Feature Not Changeable";
+ case 0x0f: return "Feature Not Namespace Specific";
+ case 0x10: return "Firmware Activation Requires NVM Subsystem Reset";
+ case 0x11: return "Firmware Activation Requires Controller Level Reset";
+ case 0x12: return "Firmware Activation Requires Maximum Time Violation";
+ case 0x13: return "Firmware Activation Prohibited";
+ case 0x14: return "Overlapping Range";
+ case 0x15: return "Namespace Insufficient Capacity";
+ case 0x16: return "-Namespace Identifier Unavailable";
+ case 0x18: return "Namespace Already Attached";
+ case 0x19: return "Namespace Is Private";
+ case 0x1a: return "Namespace Not Attached";
+ case 0x1b: return "Thin Provisioning Not Supported";
+ case 0x1c: return "-Controller List Invalid";
+ case 0x1d: return "Device Self-test In Progress";
+ case 0x1e: return "Boot Partition Write Prohibited";
+ case 0x1f: return "Invalid Controller Identifier";
+ case 0x20: return "-Invalid Secondary Controller State";
+ case 0x21: return "-Invalid Number of Controller Resources";
+ case 0x22: return "-Invalid Resource Identifier";
+ case 0x23: return "Sanitize Prohibited While Persistent Memory Region is Enabled";
+ case 0x24: return "-ANA Group Identifier Invalid";
+ case 0x25: return "ANA Attach Failed";
+ case 0x26: return "Insufficient Capacity";
+ case 0x27: return "Namespace Attachment Limit Exceeded";
+ case 0x28: return "Prohibition of Command Execution Not Supported";
+ case 0x29: return "I/O Command Set Not Supported";
+ case 0x2a: return "I/O Command Set Not Enabled";
+ case 0x2b: return "I/O Command Set Combination Rejected";
+ case 0x2c: return "-Invalid I/O Command Set";
+ case 0x2d: return "-Identifier Unavailable";
+ // 0x2e-0x6f: Reserved
+ // 0x70-0x7f: Directive Specific
+ }
+ else if (sc < 0xb8) switch (sc) {
+ // 0x80-0xbf: I/O Command Set Specific (overlap with Fabrics Command Set)
+ case 0x80: return "-Conflicting Attributes";
+ case 0x81: return "-Invalid Protection Information";
+ case 0x82: return "Attempted Write to Read Only Range";
+ case 0x83: return "Command Size Limit Exceeded";
+ // 0x84-0xb7: Reserved
+ }
+ else switch (sc) {
+ case 0xb8: return "Zoned Boundary Error";
+ case 0xb9: return "Zone Is Full";
+ case 0xba: return "Zone Is Read Only";
+ case 0xbb: return "Zone Is Offline";
+ case 0xbc: return "Zone Invalid Write";
+ case 0xbd: return "Too Many Active Zones";
+ case 0xbe: return "Too Many Open Zones";
+ case 0xbf: return "Invalid Zone State Transition";
+ // 0xc0-0xff: Vendor Specific
+ }
+ break;
+
+ case 0x2: // Media and Data Integrity Errors
+ switch (sc) {
+ // 0x00-0x7f: Reserved
+ case 0x80: return "Write Fault";
+ case 0x81: return "Unrecovered Read Error";
+ case 0x82: return "End-to-end Guard Check Error";
+ case 0x83: return "End-to-end Application Tag Check Error";
+ case 0x84: return "End-to-end Reference Tag Check Error";
+ case 0x85: return "Compare Failure";
+ case 0x86: return "Access Denied";
+ case 0x87: return "Deallocated or Unwritten Logical Block";
+ case 0x88: return "End-to-End Storage Tag Check Error";
+ // 0x89-0xbf: Reserved
+ // 0xc0-0xff: Vendor Specific
+ }
+ break;
+
+ case 0x3: // Path Related Status
+ switch (sc) {
+ case 0x00: return "Internal Path Error";
+ case 0x01: return "Asymmetric Access Persistent Loss";
+ case 0x02: return "Asymmetric Access Inaccessible";
+ case 0x03: return "Asymmetric Access Transition";
+ // 0x04-0x5f: Reserved
+ // 0x60-0x6f: Controller Detected Pathing Errors
+ case 0x60: return "Controller Pathing Error";
+ // 0x61-0x6f: Reserved
+ // 0x70-0x7f: Host Detected Pathing Errors
+ case 0x70: return "Host Pathing Error";
+ case 0x71: return "Command Aborted By Host";
+ // 0x72-0x7f: Reserved
+ // 0x80-0xbf: I/O Command Set Specific
+ // 0xc0-0xff: Vendor Specific
+ }
+ break;
+
+ // 0x4-0x6: Reserved
+ // 0x7: Vendor Specific
+ }
+ return nullptr;
+}
+
+// Return errno for NVMe status SCT/SC fields: 0, EINVAL or EIO.
+int nvme_status_to_errno(uint16_t status)
+{
+ if (!nvme_status_is_error(status))
+ return 0;
+ const char * s = nvme_status_to_flagged_str(status);
+ if (s && *s == '-')
+ return EINVAL;
+ return EIO;
+}
+
+// Return error message for NVMe status SCT/SC fields or nullptr if unknown.
+const char * nvme_status_to_str(uint16_t status)
+{
+ const char * s = nvme_status_to_flagged_str(status);
+ return (s && *s == '-' ? s + 1 : s);
+}
+
+// Return error message for NVMe status SCT/SC fields or explanatory message if unknown.
+const char * nvme_status_to_info_str(char * buf, size_t bufsize, uint16_t status)
+{
+ const char * s = nvme_status_to_str(status);
+ if (s)
+ return s;
+
+ uint8_t sct = (status >> 8) & 0x7, sc = (uint8_t)status;
+ const char * pfx = (sc >= 0xc0 ? "Vendor Specific " : "Unknown ");
+ switch (sct) {
+ case 0x0: s = "Generic Command Status"; break;
+ case 0x1: s = "Command Specific Status"; break;
+ case 0x2: s = "Media and Data Integrity Error"; break;
+ case 0x3: s = "Path Related Status"; break;
+ case 0x7: s = "Vendor Specific Status"; pfx = ""; break;
+ }
+ if (s)
+ snprintf(buf, bufsize, "%s%s 0x%02x", pfx, s, sc);
+ else
+ snprintf(buf, bufsize, "Unknown Status 0x%x/0x%02x", sct, sc);
+ return buf;
+}
diff -up smartmontools-7.1/nvmecmds.h.r5471 smartmontools-7.1/nvmecmds.h
--- smartmontools-7.1/nvmecmds.h.r5471 2023-11-22 14:07:37.646756079 +0100
+++ smartmontools-7.1/nvmecmds.h 2023-11-22 14:09:29.911084240 +0100
@@ -18,6 +18,8 @@
#include "static_assert.h"
+#include <errno.h>
+#include <stddef.h>
#include <stdint.h>
// The code below was originally imported from <linux/nvme.h> include file from
@@ -246,4 +248,22 @@ unsigned nvme_read_error_log(nvme_device
// Read NVMe SMART/Health Information log.
bool nvme_read_smart_log(nvme_device * device, smartmontools::nvme_smart_log & smart_log);
+// Return true if NVMe status indicates an error.
+constexpr bool nvme_status_is_error(uint16_t status)
+ { return !!(status & 0x07ff); }
+
+// Return errno for NVMe status SCT/SC fields: 0, EINVAL or EIO.
+int nvme_status_to_errno(uint16_t status);
+
+// Return error message for NVMe status SCT/SC fields or nullptr if unknown.
+const char * nvme_status_to_str(uint16_t status);
+
+// Return error message for NVMe status SCT/SC fields or explanatory message if unknown.
+const char * nvme_status_to_info_str(char * buf, size_t bufsize, uint16_t status);
+
+// Version of above for fixed size buffers.
+template <size_t SIZE>
+inline const char * nvme_status_to_info_str(char (& buf)[SIZE], unsigned status)
+ { return nvme_status_to_info_str(buf, SIZE, status); }
+
#endif // NVMECMDS_H
diff -up smartmontools-7.1/nvmeprint.cpp.r5471 smartmontools-7.1/nvmeprint.cpp
--- smartmontools-7.1/nvmeprint.cpp.r5471 2023-11-22 14:07:37.648756102 +0100
+++ smartmontools-7.1/nvmeprint.cpp 2023-11-22 14:11:35.899574762 +0100
@@ -420,7 +420,7 @@ static void print_error_log(const nvme_e
continue;
if (cnt == 1)
- pout("Num ErrCount SQId CmdId Status PELoc LBA NSID VS\n");
+ pout("Num ErrCount SQId CmdId Status PELoc LBA NSID VS Message\n");
char sq[16] = "-", cm[16] = "-", st[16] = "-", pe[16] = "-";
char lb[32] = "-", ns[16] = "-", vs[8] = "-";
@@ -439,8 +439,10 @@ static void print_error_log(const nvme_e
if (e.vs != 0x00)
snprintf(vs, sizeof(vs), "0x%02x", e.vs);
- pout("%3u %10" PRIu64 " %5s %7s %7s %6s %12s %5s %5s\n",
- i, e.error_count, sq, cm, st, pe, lb, ns, vs);
+ char buf[64];
+ pout("%3u %10" PRIu64 " %5s %7s %7s %6s %12s %5s %5s %s\n",
+ i, e.error_count, sq, cm, st, pe, lb, ns, vs,
+ nvme_status_to_info_str(buf, e.status_field >> 1));
}
if (!cnt)

@ -1,159 +0,0 @@
diff -U0 smartmontools-7.1/ChangeLog.r5472 smartmontools-7.1/ChangeLog
diff -up smartmontools-7.1/smartd.conf.5.in.r5472 smartmontools-7.1/smartd.conf.5.in
--- smartmontools-7.1/smartd.conf.5.in.r5472 2019-12-13 21:20:45.000000000 +0100
+++ smartmontools-7.1/smartd.conf.5.in 2023-11-22 12:32:37.341051288 +0100
@@ -696,6 +696,20 @@ error log has increased since the last c
.I error
\- [NVMe] report if the "Number of Error Information Log Entries" from the
SMART/Health Information log has increased since the last check.
+.br
+[NEW EXPERIMENTAL SMARTD FEATURE]
+This will only be logged as LOG_CRIT if at least one of the new errors is
+still present in the Error Information log and its status indicates a
+device related error.
+Up to eight of the most recent of these errors are logged as LOG_INFO then.
+This is useful because the NVMe Error Information log is not persistent
+across power cycles or device resets.
+.br
+If all new errors are either no longer present in the log or are not device
+related (e.g. invalid command, invalid field in command, ...), a LOG_INFO
+message is generated instead.
+This avoids misleading warnings if the operating system issues unsupported
+commands and the device firmware also logs these kind of errors.
.Sp
.\" %ENDIF OS Darwin FreeBSD Linux NetBSD Windows Cygwin
.I xerror
diff -up smartmontools-7.1/smartd.cpp.r5472 smartmontools-7.1/smartd.cpp
--- smartmontools-7.1/smartd.cpp.r5472 2019-12-29 14:10:18.000000000 +0100
+++ smartmontools-7.1/smartd.cpp 2023-11-22 12:35:19.254046678 +0100
@@ -2,7 +2,7 @@
* Home page of code is: https://www.smartmontools.org
*
* Copyright (C) 2002-11 Bruce Allen
- * Copyright (C) 2008-19 Christian Franke
+ * Copyright (C) 2008-23 Christian Franke
* Copyright (C) 2000 Michael Cornwell <cornwell@acm.org>
* Copyright (C) 2008 Oliver Bock <brevilo@users.sourceforge.net>
*
@@ -410,6 +410,9 @@ struct dev_config
ata_vendor_attr_defs attribute_defs; // -v options
+ // NVMe only
+ unsigned nvme_err_log_max_entries{}; // size of error log
+
dev_config();
};
@@ -2628,6 +2631,74 @@ static int nvme_get_max_temp_kelvin(cons
return k;
}
+// Check the NVMe Error Information log for device related errors.
+static bool check_nvme_error_log(const dev_config & cfg, dev_state & state, nvme_device * nvmedev,
+ uint64_t newcnt = 0)
+{
+ // Limit transfer size to one page (64 entries) to avoid problems with
+ // limits of NVMe pass-through layer or too low MDTS values.
+ unsigned want_entries = 64;
+ if (want_entries > cfg.nvme_err_log_max_entries)
+ want_entries = cfg.nvme_err_log_max_entries;
+ raw_buffer error_log_buf(want_entries * sizeof(nvme_error_log_page));
+ nvme_error_log_page * error_log =
+ reinterpret_cast<nvme_error_log_page *>(error_log_buf.data());
+ unsigned read_entries = nvme_read_error_log(nvmedev, error_log, want_entries, false /*!lpo_sup*/);
+ if (!read_entries) {
+ PrintOut(LOG_INFO, "Device: %s, Read %u entries from Error Information Log failed\n",
+ cfg.name.c_str(), want_entries);
+ return false;
+ }
+
+ if (!newcnt)
+ return true; // Support check only
+
+ // Scan log, find device related errors
+ uint64_t oldcnt = state.nvme_err_log_entries, mincnt = newcnt;
+ int err = 0, ign = 0;
+ for (unsigned i = 0; i < read_entries; i++) {
+ const nvme_error_log_page & e = error_log[i];
+ if (!e.error_count)
+ continue; // unused
+ if (e.error_count <= oldcnt)
+ break; // stop on first old entry
+ if (e.error_count < mincnt)
+ mincnt = e.error_count; // min known error
+ if (e.error_count > newcnt)
+ newcnt = e.error_count; // adjust maximum
+ uint16_t status = e.status_field >> 1;
+ if (!nvme_status_is_error(status) || nvme_status_to_errno(status) == EINVAL) {
+ ign++; // Not a device related error
+ continue;
+ }
+
+ // Log the most recent 8 errors
+ if (++err > 8)
+ continue;
+ char buf[64];
+ PrintOut(LOG_INFO, "Device: %s, NVMe error [%u], count %" PRIu64 ", status 0x%04x: %s\n",
+ cfg.name.c_str(), i, e.error_count, e.status_field,
+ nvme_status_to_info_str(buf, e.status_field >> 1));
+ }
+
+ std::string msg = strprintf("Device: %s, NVMe error count increased from %" PRIu64 " to %" PRIu64
+ " (%d new, %d ignored, %" PRIu64 " unknown)",
+ cfg.name.c_str(), oldcnt, newcnt, err, ign,
+ (mincnt > oldcnt + 1 ? mincnt - oldcnt - 1 : 0));
+ // LOG_CRIT only if device related errors are found
+ if (!err) {
+ PrintOut(LOG_INFO, "%s\n", msg.c_str());
+ }
+ else {
+ PrintOut(LOG_CRIT, "%s\n", msg.c_str());
+ MailWarning(cfg, state, 4, "%s", msg.c_str());
+ }
+
+ state.nvme_err_log_entries = newcnt;
+ state.must_write = true;
+ return true;
+}
+
static int NVMeDeviceScan(dev_config & cfg, dev_state & state, nvme_device * nvmedev,
const dev_config_vector * prev_cfgs)
{
@@ -2687,8 +2758,14 @@ static int NVMeDeviceScan(dev_config & c
}
// Init total error count
+ cfg.nvme_err_log_max_entries = id_ctrl.elpe + 1; // 0's based value
if (cfg.errorlog || cfg.xerrorlog) {
- state.nvme_err_log_entries = le128_to_uint64(smart_log.num_err_log_entries);
+ if (!check_nvme_error_log(cfg, state, nvmedev)) {
+ PrintOut(LOG_INFO, "Device: %s, Error Information unavailable, ignoring -l [x]error\n", name);
+ cfg.errorlog = cfg.xerrorlog = false;
+ }
+ else
+ state.nvme_err_log_entries = le128_to_uint64(smart_log.num_err_log_entries);
}
// If no supported tests selected, return
@@ -3760,16 +3837,12 @@ static int NVMeCheckDevice(const dev_con
// Check if number of errors has increased
if (cfg.errorlog || cfg.xerrorlog) {
- uint64_t oldcnt = state.nvme_err_log_entries;
uint64_t newcnt = le128_to_uint64(smart_log.num_err_log_entries);
- if (newcnt > oldcnt) {
- PrintOut(LOG_CRIT, "Device: %s, number of Error Log entries increased from %" PRIu64 " to %" PRIu64 "\n",
- name, oldcnt, newcnt);
- MailWarning(cfg, state, 4, "Device: %s, number of Error Log entries increased from %" PRIu64 " to %" PRIu64,
- name, oldcnt, newcnt);
- state.must_write = true;
+ if (newcnt > state.nvme_err_log_entries) {
+ // Warn only if device related errors are found
+ check_nvme_error_log(cfg, state, nvmedev, newcnt);
}
- state.nvme_err_log_entries = newcnt;
+ // else // TODO: Handle decrease of count?
}
CloseDevice(nvmedev, name);

@ -1,6 +1,6 @@
# command line options for smartd # command line options for smartd
# Add -s /var/lib/smartmontools to enable state persistence # Add -s /var/lib/smartmontools to enable state persistence
smartd_opts="-q never" smartd_opts="-q never --capabilities"
# autogenerated config file options # autogenerated config file options
# smartd_conf_opts="-H -m root" # smartd_conf_opts="-H -m root"

@ -1,9 +1,8 @@
Summary: Tools for monitoring SMART capable hard disks Summary: Tools for monitoring SMART capable hard disks
Name: smartmontools Name: smartmontools
Version: 7.1 Version: 7.2
Release: 3%{?dist} Release: 7%{?dist}
Epoch: 1 Epoch: 1
Group: System Environment/Base
License: GPLv2+ License: GPLv2+
URL: http://smartmontools.sourceforge.net/ URL: http://smartmontools.sourceforge.net/
Source0: http://downloads.sourceforge.net/%{name}/%{name}-%{version}.tar.gz Source0: http://downloads.sourceforge.net/%{name}/%{name}-%{version}.tar.gz
@ -15,25 +14,15 @@ Source5: drivedb.h
#fedora/rhel specific #fedora/rhel specific
Patch1: smartmontools-5.38-defaultconf.patch Patch1: smartmontools-5.38-defaultconf.patch
Patch2: smartmontools-7.2-logsuppagefix1.patch Patch2: smartmontools-7.2-capnotify.patch
Patch3: smartmontools-7.2-logsuppagefix2.patch Patch3: smartmontools-7.2-permsfix.patch
Patch4: smartmontools-7.2-logsuppagefix3.patch Patch4: smartmontools-7.2-logsuppagefix3.patch
Patch5: smartmontools-7.2-logsuppagefix4.patch
BuildRequires: make
# 3x from upstream, for smartmontools <= 7.4, #RHEL-6982 BuildRequires: gcc-c++ readline-devel ncurses-devel automake util-linux groff gettext
Patch6: smartmontools-7.4-r5121.patch
Patch7: smartmontools-7.4-r5471.patch
Patch8: smartmontools-7.4-r5472.patch
BuildRoot: %(mktemp -ud %{_tmppath}/%{name}-%{version}-%{release}-XXXXXX)
#new rpm does not handle this (yet?)
#Requires(triggerun): systemd-units
Requires(post): systemd-units
Requires(preun): systemd-units
Requires(postun): systemd-units
BuildRequires: readline-devel ncurses-devel automake util-linux groff gettext
BuildRequires: libselinux-devel libcap-ng-devel BuildRequires: libselinux-devel libcap-ng-devel
BuildRequires: systemd-units systemd-devel BuildRequires: systemd systemd-devel
%{?systemd_requires}
%description %description
The smartmontools package contains two utility programs (smartctl The smartmontools package contains two utility programs (smartctl
@ -45,32 +34,25 @@ failure.
%prep %prep
%setup -q %setup -q
%patch -P 1 -p1 -b .defaultconf %patch1 -p1 -b .defaultconf
%patch -P 2 -p2 -b .logsuppagefix1 %patch2 -p1 -b .capnotify
%patch -P 3 -p2 -b .logsuppagefix2 %patch3 -p1 -b .permsfix
%patch -P 4 -p2 -b .logsuppagefix3 %patch4 -p2 -b .logsuppagefix3
%patch -P 5 -p1 -b .logsuppagefix4
%patch -P 6 -p1 -b .r5121
%patch -P 7 -p1 -b .r5471
%patch -P 8 -p1 -b .r5472
# update SOURCE5 on maintainer's machine prior commiting, there's no internet connection on builders
curl %{UrlSource5} -o %{SOURCE5} ||:
cp %{SOURCE5} . cp %{SOURCE5} .
%build %build
autoreconf -i autoreconf -i
%configure --with-selinux --with-libcap-ng=yes --with-libsystemd --with-systemdsystemunitdir=%{_unitdir} --sysconfdir=%{_sysconfdir}/%{name}/ --with-systemdenvfile=%{_sysconfdir}/sysconfig/%{name} %configure --with-selinux --with-libcap-ng=yes --with-libsystemd --with-systemdsystemunitdir=%{_unitdir} --sysconfdir=%{_sysconfdir}/%{name}/ --with-systemdenvfile=%{_sysconfdir}/sysconfig/%{name}
%ifarch sparc64 # update SOURCE5 on maintainer's machine prior commiting, there's no internet connection on builders
make CXXFLAGS="$RPM_OPT_FLAGS -fPIE" LDFLAGS="-pie -Wl,-z,relro,-z,now" %make_build update-smart-drivedb
%else ./update-smart-drivedb -s - -u sf drivedb.h ||:
make CXXFLAGS="$RPM_OPT_FLAGS -fpie" LDFLAGS="-pie -Wl,-z,relro,-z,now" cp drivedb.h ../drivedb.h ||:
%endif
%make_build CXXFLAGS="$RPM_OPT_FLAGS -fpie" LDFLAGS="-pie -Wl,-z,relro,-z,now"
%install %install
rm -rf $RPM_BUILD_ROOT %make_install
make DESTDIR=$RPM_BUILD_ROOT install
rm -f examplescripts/Makefile* rm -f examplescripts/Makefile*
chmod a-x -R examplescripts/* chmod a-x -R examplescripts/*
@ -78,26 +60,12 @@ install -D -p -m 644 %{SOURCE2} $RPM_BUILD_ROOT%{_sysconfdir}/sysconfig/smartmon
install -D -p -m 755 %{SOURCE4} $RPM_BUILD_ROOT/%{_libexecdir}/%{name}/smartdnotify install -D -p -m 755 %{SOURCE4} $RPM_BUILD_ROOT/%{_libexecdir}/%{name}/smartdnotify
mkdir -p $RPM_BUILD_ROOT/%{_sysconfdir}/%{name}/smartd_warning.d mkdir -p $RPM_BUILD_ROOT/%{_sysconfdir}/%{name}/smartd_warning.d
rm -rf $RPM_BUILD_ROOT/etc/{rc.d,init.d} rm -rf $RPM_BUILD_ROOT/etc/{rc.d,init.d}
rm -rf $RPM_BUILD_ROOT/%{_docdir}/%{name} rm -rf $RPM_BUILD_ROOT%{_docdir}/%{name}
mkdir -p $RPM_BUILD_ROOT/%{_sharedstatedir}/%{name} mkdir -p $RPM_BUILD_ROOT%{_sharedstatedir}/%{name}
%clean
rm -rf $RPM_BUILD_ROOT
%preun %preun
%systemd_preun smartd.service %systemd_preun smartd.service
%pre
if [ $1 = 2 ] # only during update
then
# for Fedora 19-22
if [ -f %{_sysconfdir}/smartd.conf -a ! -e %{_sysconfdir}/%name ]
then
mkdir -p %{_sysconfdir}/%{name}
cp -p %{_sysconfdir}/smartd.conf %{_sysconfdir}/%{name}
fi
fi
%post %post
%systemd_post smartd.service %systemd_post smartd.service
@ -105,9 +73,9 @@ fi
%systemd_postun_with_restart smartd.service %systemd_postun_with_restart smartd.service
%files %files
%defattr(-,root,root,-) %doc AUTHORS ChangeLog INSTALL NEWS README
%doc AUTHORS ChangeLog COPYING INSTALL NEWS README
%doc TODO examplescripts smartd.conf %doc TODO examplescripts smartd.conf
%license COPYING
%dir %{_sysconfdir}/%name %dir %{_sysconfdir}/%name
%dir %{_sysconfdir}/%name/smartd_warning.d %dir %{_sysconfdir}/%name/smartd_warning.d
%config(noreplace) %{_sysconfdir}/%{name}/smartd.conf %config(noreplace) %{_sysconfdir}/%{name}/smartd.conf
@ -124,17 +92,69 @@ fi
%{_sharedstatedir}/%{name} %{_sharedstatedir}/%{name}
%changelog %changelog
* Fri Mar 29 2024 MSVSphere Packaging Team <packager@msvsphere-os.ru> - 1:7.1-3 * Mon May 29 2023 Michal Hlavinka <mhlavink@redhat.com> - 1:7.2-7
- Rebuilt for MSVSphere 8.10 beta - support reporting of Error Counter logging details (#2137279)
* Wed Nov 03 2021 Michal Hlavinka <mhlavink@redhat.com> - 1:7.2-6
- make notification work with capabilities (#1962593)
* Tue Aug 10 2021 Mohan Boddu <mboddu@redhat.com> - 1:7.2-5
- Rebuilt for IMA sigs, glibc 2.34, aarch64 flags
Related: rhbz#1991688
* Fri Apr 16 2021 Mohan Boddu <mboddu@redhat.com> - 1:7.2-4
- Rebuilt for RHEL 9 BETA on Apr 15th 2021. Related: rhbz#1947937
* Wed Jan 27 2021 Fedora Release Engineering <releng@fedoraproject.org> - 1:7.2-3
- Rebuilt for https://fedoraproject.org/wiki/Fedora_34_Mass_Rebuild
* Mon Jan 25 2021 Michal Hlavinka <mhlavink@redhat.com> - 1:7.2-2
- make sure correct version of drivedb.h is used (#1918946)
* Mon Jan 18 2021 Michal Hlavinka <mhlavink@redhat.com> - 1:7.2-1
- smartmontools updated to 7.2
* Mon Jan 18 2021 Michal Hlavinka <mhlavink@redhat.com> - 1:7.1-10
- use capabilites by default
* Wed Jul 29 2020 Fedora Release Engineering <releng@fedoraproject.org> - 1:7.1-9
- Rebuilt for https://fedoraproject.org/wiki/Fedora_33_Mass_Rebuild
* Thu Jan 30 2020 Fedora Release Engineering <releng@fedoraproject.org> - 1:7.1-8
- Rebuilt for https://fedoraproject.org/wiki/Fedora_32_Mass_Rebuild
* Mon Jan 06 2020 Michal Hlavinka <mhlavink@redhat.com> - 1:7.1-7
- smartmontools updated to 7.1
* Fri Jul 26 2019 Fedora Release Engineering <releng@fedoraproject.org> - 1:7.0-7
- Rebuilt for https://fedoraproject.org/wiki/Fedora_31_Mass_Rebuild
* Fri Apr 12 2019 Daniel Axelrod <daxelrod@datto.com> - 1:7.0-6
- Remove unused patches
- Drop pre script for migrating from unsupported Fedora versions
- Replace sed with configure switch
* Wed Apr 03 2019 Michal Hlavinka <mhlavink@redhat.com> - 1:7.0-5
- revert smartd_warning related changes
* Sat Feb 02 2019 Fedora Release Engineering <releng@fedoraproject.org> - 1:7.0-4
- Rebuilt for https://fedoraproject.org/wiki/Fedora_30_Mass_Rebuild
* Thu Jan 03 2019 Michal Hlavinka <mhlavink@redhat.com> - 1:7.0-3
- update default config
* Thu Jan 03 2019 Michal Hlavinka <mhlavink@redhat.com> - 1:7.0-2
- use smartd_warning plugin to notify users (bug #1647534)
- spec cleanup
* Wed Nov 22 2023 Michal Hlavinka <mhlavink@redhat.com> - 1:7.1-3 * Thu Jan 03 2019 Michal Hlavinka <mhlavink@redhat.com> - 1:7.0-1
- don't report new non-device related errors as critical (#RHEL-6982) - smartmontools updated to 7.0
* Mon May 29 2023 Michal Hlavinka <mhlavink@redhat.com> - 1:7.1-2 * Sat Jul 14 2018 Fedora Release Engineering <releng@fedoraproject.org> - 1:6.6-5
- support reporting of Error Counter logging details (#2136439) - Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
* Wed Apr 22 2020 Michal Hlavinka <mhlavink@redhat.com> - 1:7.1-1 * Wed Mar 07 2018 Michal Hlavinka <mhlavink@redhat.com> - 1:6.6-4
- smartmontools updated to 7.1 (#1671154) - add gcc-c++ buildrequire
* Fri Feb 09 2018 Fedora Release Engineering <releng@fedoraproject.org> - 1:6.6-3 * Fri Feb 09 2018 Fedora Release Engineering <releng@fedoraproject.org> - 1:6.6-3
- Rebuilt for https://fedoraproject.org/wiki/Fedora_28_Mass_Rebuild - Rebuilt for https://fedoraproject.org/wiki/Fedora_28_Mass_Rebuild

Loading…
Cancel
Save