SOURCES/0005-Enable-disable-devices-for-RHEL.patch

@@ -126,7 +126,7 @@ new file mode 100644
 index 0000000000..b0191d3c69
 --- /dev/null
 +++ b/configs/devices/aarch64-softmmu/aarch64-rh-devices.mak
-@@ -0,0 +1,43 @@
+@@ -0,0 +1,42 @@
 +include ../rh-virtio.mak
 +
 +CONFIG_ARM_GIC_KVM=y
@@ -137,13 +137,11 @@ index 0000000000..b0191d3c69
 +CONFIG_CXL=y
 +CONFIG_CXL_MEM_DEVICE=y
 +CONFIG_EDID=y
-+CONFIG_IVSHMEM_DEVICE=y
 +CONFIG_PCIE_PORT=y
 +CONFIG_PCIE_PCI_BRIDGE=y
 +CONFIG_PCI_DEVICES=y
 +CONFIG_PCI_TESTDEV=y
 +CONFIG_PFLASH_CFI01=y
-+CONFIG_QXL=y
 +CONFIG_SCSI=y
 +CONFIG_SEMIHOSTING=y
 +CONFIG_USB=y
@@ -260,7 +258,7 @@ new file mode 100644
 index 0000000000..d60ff1bcfc
 --- /dev/null
 +++ b/configs/devices/x86_64-softmmu/x86_64-rh-devices.mak
-@@ -0,0 +1,114 @@
+@@ -0,0 +1,112 @@
 +include ../rh-virtio.mak
 +
 +CONFIG_ACPI=y
@@ -306,7 +304,6 @@ index 0000000000..d60ff1bcfc
 +CONFIG_ISA_BUS=y
 +CONFIG_ISA_DEBUG=y
 +CONFIG_ISA_TESTDEV=y
-+CONFIG_IVSHMEM_DEVICE=y
 +CONFIG_LPC_ICH9=y
 +CONFIG_MC146818RTC=y
 +CONFIG_MEM_DEVICE=y
@@ -328,7 +325,6 @@ index 0000000000..d60ff1bcfc
 +CONFIG_PFLASH_CFI01=y
 +CONFIG_PVPANIC_ISA=y
 +CONFIG_PXB=y
-+CONFIG_QXL=y
 +CONFIG_Q35=y
 +CONFIG_RTL8139_PCI=y
 +CONFIG_SCSI=y

SPECS/qemu-kvm.spec

@@ -12,18 +12,13 @@
 %endif
 
 %global have_usbredir 1
-%global have_spice    1
-%global have_virgl    1
 %global have_opengl   1
 %global have_fdt      1
 %global have_modules_load 0
 %global have_memlock_limits 0
 # Some of these are not relevant for RHEL, but defining them
 # makes it easier to sync the dependency list with Fedora
-%global have_block_gluster 1
-%global have_block_iscsi 1
 %global have_block_rbd 1
-%global have_block_ssh 1
 %global enable_werror 1
 %global have_clang 1
 %global have_safe_stack 0
@@ -65,9 +60,6 @@
 
 %ifnarch %{ix86} x86_64 aarch64
     %global have_usbredir 0
-    %global have_spice 0
-    %global have_virgl 0
-    %global have_opengl 0
 %endif
 
 %ifnarch s390x
@@ -89,9 +81,8 @@
 %endif
 %ifarch x86_64
     %global kvm_target    x86_64
-%endif
+%else
-%ifarch aarch64
+    %global have_opengl  0
-    %global kvm_target    aarch64
 %endif
 %ifarch %{power64}
     %global kvm_target    ppc64
@@ -104,78 +95,61 @@
 %ifarch ppc
     %global kvm_target    ppc
 %endif
-
+%ifarch aarch64
+    %global kvm_target    aarch64
+%endif
 
 %global target_list %{kvm_target}-softmmu
-%global block_drivers_rw_list qcow2,raw,file,host_device,nbd,blkdebug,luks,null-co,nvme,copy-on-read,throttle,compress,virtio-blk-vhost-vdpa,virtio-blk-vfio-pci,virtio-blk-vhost-user,io_uring,nvme-io_uring,host_cdrom
+%global block_drivers_rw_list qcow2,raw,file,host_device,nbd,iscsi,rbd,blkdebug,luks,null-co,nvme,copy-on-read,throttle,compress,virtio-blk-vhost-vdpa,virtio-blk-vfio-pci,virtio-blk-vhost-user,io_uring,nvme-io_uring
-%if 0%{have_block_gluster}
+%global block_drivers_ro_list vdi,vmdk,vhdx,vpc,https
-    %global block_drivers_rw_list %{block_drivers_rw_list},gluster
-%endif
-%if 0%{have_block_iscsi}
-    %global block_drivers_rw_list %{block_drivers_rw_list},iscsi
-%endif
-%if 0%{have_block_rbd}
-    %global block_drivers_rw_list %{block_drivers_rw_list},rbd
-%endif
-%global block_drivers_ro_list vdi,vmdk,vhdx,vpc,https,host_cdrom
-%if 0%{have_block_ssh}
-    %global block_drivers_ro_list %{block_drivers_rw_list},ssh
-%endif
 %define qemudocdir %{_docdir}/%{name}
 %global firmwaredirs "%{_datadir}/qemu-firmware:%{_datadir}/ipxe/qemu:%{_datadir}/seavgabios:%{_datadir}/seabios"
 
 #Versions of various parts:
 
 %global requires_all_modules                                     \
-%if %{have_spice}                                                \
-Requires: %{name}-ui-spice = %{epoch}:%{version}-%{release}      \
-%endif                                                           \
 %if %{have_opengl}                                               \
 Requires: %{name}-ui-opengl = %{epoch}:%{version}-%{release}     \
 Requires: %{name}-ui-egl-headless = %{epoch}:%{version}-%{release}     \
 %endif                                                           \
 Requires: %{name}-device-display-virtio-gpu = %{epoch}:%{version}-%{release}   \
-%ifarch x86_64 aarch64 %{power64}                                        \
-Requires: %{name}-device-display-virtio-gpu-gl = %{epoch}:%{version}-%{release}   \
-%endif                                                           \
 %ifarch s390x                                                    \
 Requires: %{name}-device-display-virtio-gpu-ccw = %{epoch}:%{version}-%{release}   \
 %else                                                            \
 Requires: %{name}-device-display-virtio-gpu-pci = %{epoch}:%{version}-%{release}   \
-%ifarch x86_64 aarch64 %{power64}                                        \
-Requires: %{name}-device-display-virtio-gpu-pci-gl = %{epoch}:%{version}-%{release}   \
-%endif          						 \
 %endif                                                           \
 %ifarch x86_64 %{power64}                                        \
 Requires: %{name}-device-display-virtio-vga = %{epoch}:%{version}-%{release}   \
-Requires: %{name}-device-display-virtio-vga-gl = %{epoch}:%{version}-%{release}   \
-%endif                                                           \
-%if %{have_virgl}                                                \
-Requires: %{name}-device-display-vhost-user-gpu = %{epoch}:%{version}-%{release}   \
 %endif                                                           \
 Requires: %{name}-device-usb-host = %{epoch}:%{version}-%{release}   \
 %if %{have_usbredir}                                             \
 Requires: %{name}-device-usb-redirect = %{epoch}:%{version}-%{release}   \
 %endif                                                           \
 Requires: %{name}-block-blkio = %{epoch}:%{version}-%{release}   \
-%if %{have_block_gluster}                                        \
-Requires: %{name}-block-gluster = %{epoch}:%{version}-%{release}   \
-%endif                                                           \
-%if %{have_block_iscsi}                                          \
-Requires: %{name}-block-iscsi = %{epoch}:%{version}-%{release}   \
-%endif                                                           \
-%if %{have_block_rbd}                                            \
 Requires: %{name}-block-rbd = %{epoch}:%{version}-%{release}     \
-%endif                                                           \
-%if %{have_block_ssh}                                            \
-Requires: %{name}-block-ssh = %{epoch}:%{version}-%{release}   \
-%endif                                                           \
 Requires: %{name}-audio-pa = %{epoch}:%{version}-%{release}
 
+# Since SPICE is removed from RHEL-9, the following Obsoletes:
+# removes {name}-ui-spice for upgrades from RHEL-8
+# The "<= {version}" assumes RHEL-9 version >= RHEL-8 version (in
+# other words RHEL-9 rebases are done together/before RHEL-8 ones)
+
+# In addition, we obsolete some block drivers as we are no longer support
+# them in default qemu-kvm installation.
+
+# Note: ssh driver wasn't removed yet just disabled due to late handling
+
+%global obsoletes_some_modules                                  \
+Obsoletes: %{name}-ui-spice <= %{epoch}:%{version}                       \
+Obsoletes: %{name}-block-gluster <= %{epoch}:%{version}                  \
+Obsoletes: %{name}-block-iscsi <= %{epoch}:%{version}                    \
+Obsoletes: %{name}-block-ssh <= %{epoch}:%{version}                    \
+
+
 Summary: QEMU is a machine emulator and virtualizer
 Name: qemu-kvm
 Version: 9.0.0
-Release: 10%{?rcrel}%{?dist}%{?cc_suffix}.inferit.1
+Release: 10%{?rcrel}%{?dist}%{?cc_suffix}
 # Epoch because we pushed a qemu-1.0 package. AIUI this can't ever be dropped
 # Epoch 15 used for RHEL 8
 # Epoch 17 used for RHEL 9 (due to release versioning offset in RHEL 8.5)
@@ -459,7 +433,6 @@ Patch137: kvm-qemu-guest-agent-Update-the-logfile-path-of-qga-fsfr.patch
 # For RHEL-52617 - CVE-2024-7409 qemu-kvm: Denial of Service via Improper Synchronization in QEMU NBD Server During Socket Closure [rhel-9.5]
 Patch138: kvm-nbd-server-CVE-2024-7409-Avoid-use-after-free-when-c.patch
 
-
 %if %{have_clang}
 BuildRequires: clang
 %if %{have_safe_stack}
@@ -490,18 +463,9 @@ BuildRequires: python3-sphinx_rtd_theme
 BuildRequires: libseccomp-devel >= %{libseccomp_version}
 # For network block driver
 BuildRequires: libcurl-devel
-%if %{have_block_gluster}
-BuildRequires: glusterfs-api-devel
-%endif
-%if %{have_block_iscsi}
-BuildRequires: libiscsi-devel
-%endif
 %if %{have_block_rbd}
 BuildRequires: librbd-devel
 %endif
-%if %{have_block_ssh}
-BuildRequires: libssh-devel
-%endif
 # We need both because the 'stap' binary is probed for by configure
 BuildRequires: systemtap
 BuildRequires: systemtap-sdt-devel
@@ -541,16 +505,6 @@ BuildRequires: perl-Test-Harness
 BuildRequires: libslirp-devel
 BuildRequires: pulseaudio-libs-devel
 BuildRequires: spice-protocol
-%if %{have_spice}
-BuildRequires: spice-server-devel
-BuildRequires: libcacard-devel
-# For smartcard NSS support
-BuildRequires: nss-devel
-%endif
-%if %{have_virgl}
-# virgl 3d support
-BuildRequires: virglrenderer-devel
-%endif
 BuildRequires: capstone-devel
 
 # Requires for qemu-kvm package
@@ -570,6 +524,7 @@ hardware for a full system such as a PC and its associated peripherals.
 
 %package core
 Summary: %{name} core components
+%{obsoletes_some_modules}
 Requires: %{name}-common = %{epoch}:%{version}-%{release}
 Requires: qemu-img = %{epoch}:%{version}-%{release}
 %ifarch %{ix86} x86_64
@@ -616,7 +571,10 @@ Requires: seabios-bin >= 1.10.2-1
 Requires: seavgabios-bin >= 1.12.0-3
 Requires: ipxe-roms-qemu >= %{ipxe_version}
 %endif
-
+# Removal -gl modules as they do not provide any functionality - see bz#2149022
+Obsoletes: %{name}-device-display-virtio-gpu-gl <= %{epoch}:%{version}
+Obsoletes: %{name}-device-display-virtio-gpu-pci-gl <= %{epoch}:%{version}
+Obsoletes: %{name}-device-display-virtio-vga-gl <= %{epoch}:%{version}
 
 %description common
 %{name} is an open source virtualizer that provides hardware emulation for
@@ -698,26 +656,6 @@ This package provides the additional CURL block driver for QEMU.
 
 Install this package if you want to access remote disks over
 http, https, ftp and other transports provided by the CURL library.
-%if %{have_block_gluster}
-%package  block-gluster
-Summary: QEMU Gluster block driver
-Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release}
-%description block-gluster
-This package provides the additional Gluster block driver for QEMU.
-
-Install this package if you want to access remote Gluster storage.
-%endif
-
-%if %{have_block_iscsi}
-%package  block-iscsi
-Summary: QEMU iSCSI block driver
-Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release}
-
-%description block-iscsi
-This package provides the additional iSCSI block driver for QEMU.
-
-Install this package if you want to access iSCSI volumes.
-%endif
 
 
 %if %{have_block_rbd}
@@ -732,35 +670,12 @@ using the rbd protocol.
 %endif
 
 
-%if %{have_block_ssh}
-%package  block-ssh
-Summary: QEMU SSH block driver
-Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release}
-
-%description block-ssh
-This package provides the additional SSH block driver for QEMU.
-
-Install this package if you want to access remote disks using
-the Secure Shell (SSH) protocol.
-%endif
-
-
 %package  audio-pa
 Summary: QEMU PulseAudio audio driver
 Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release}
 %description audio-pa
 This package provides the additional PulseAudio audio driver for QEMU.
 
-%if %{have_spice}
-%package  ui-spice
-Summary: QEMU spice support
-Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release}
-%if %{have_opengl}
-Requires: %{name}-ui-opengl%{?_isa} = %{epoch}:%{version}-%{release}
-%endif
-%description ui-spice
-This package provides spice support.
-%endif
 
 %if %{have_opengl}
 %package  ui-opengl
@@ -772,15 +687,6 @@ Requires: mesa-dri-drivers
 %description ui-opengl
 This package provides opengl support.
 
-
-%if %{have_virgl}
-%package device-display-vhost-user-gpu
-Summary: QEMU QXL display device
-Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release}
-%description device-display-vhost-user-gpu
-This package provides the vhost-user-gpu display device for QEMU.
-%endif
-
 %package  ui-egl-headless
 Summary: QEMU EGL headless driver
 Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release}
@@ -796,35 +702,20 @@ Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release}
 %description device-display-virtio-gpu
 This package provides the virtio-gpu display device for QEMU.
 
-%ifarch x86_64 aarch64 %{power64}
-%package device-display-virtio-gpu-gl
-Summary: QEMU virtio-gpu-gl display device
-Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release}
-%description device-display-virtio-gpu-gl
-This package provides the virtio-gpu-gl display device for QEMU.
-%endif
-
 %ifarch s390x
 %package device-display-virtio-gpu-ccw
 Summary: QEMU virtio-gpu-ccw display device
 Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release}
+Requires: %{name}-device-display-virtio-gpu = %{epoch}:%{version}-%{release}
 %description device-display-virtio-gpu-ccw
 This package provides the virtio-gpu-ccw display device for QEMU.
 %else
 %package device-display-virtio-gpu-pci
 Summary: QEMU virtio-gpu-pci display device
 Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release}
+Requires: %{name}-device-display-virtio-gpu = %{epoch}:%{version}-%{release}
 %description device-display-virtio-gpu-pci
 This package provides the virtio-gpu-pci display device for QEMU.
-%ifarch x86_64 aarch64 %{power64}
-%package device-display-virtio-gpu-pci-gl
-Summary: QEMU virtio-gpu-pci-gl display device
-Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release}
-%description device-display-virtio-gpu-pci-gl
-This package provides the virtio-gpu-pci-gl display device for QEMU.
-%else
-Obsoletes: %{name}-device-display-virtio-gpu-pci-gl <= %{epoch}:%{version}
-%endif
 %endif
 
 %ifarch x86_64 %{power64}
@@ -833,11 +724,6 @@ Summary: QEMU virtio-vga display device
 Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release}
 %description device-display-virtio-vga
 This package provides the virtio-vga display device for QEMU.
-%package device-display-virtio-vga-gl
-Summary: QEMU virtio-vga-gl display device
-Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release}
-%description device-display-virtio-vga-gl
-This package provides the virtio-vga-gl display device for QEMU.
 %endif
 
 %package device-usb-host
@@ -1078,21 +964,12 @@ run_configure \
   --enable-fdt=system \
 %endif
   --enable-gio \
-%if %{have_block_gluster}
-  --enable-glusterfs \
-%endif
   --enable-gnutls \
   --enable-guest-agent \
   --enable-iconv \
   --enable-kvm \
-%if %{have_block_iscsi}
-  --enable-libiscsi \
-%endif
 %if %{have_pmem}
   --enable-libpmem \
-%endif
-%if %{have_block_ssh}
-  --enable-libssh \
 %endif
   --enable-libusb \
   --enable-libudev \
@@ -1120,10 +997,6 @@ run_configure \
   --enable-selinux \
   --enable-slirp \
   --enable-snappy \
-%if %{have_spice}
-  --enable-smartcard \
-  --enable-spice \
-%endif
   --enable-spice-protocol \
   --enable-system \
   --enable-tcg \
@@ -1138,9 +1011,6 @@ run_configure \
   --enable-vhost-user \
   --enable-vhost-user-blk-server \
   --enable-vhost-vdpa \
-%if %{have_virgl}
-  --enable-virglrenderer \
-%endif
   --enable-vnc \
   --enable-png \
   --enable-vnc-sasl \
@@ -1406,6 +1276,16 @@ install -D -m 0644 %{_sourcedir}/bridge.conf %{buildroot}%{_sysconfdir}/%{name}/
 install -m 0644 contrib/systemd/qemu-pr-helper.service %{buildroot}%{_unitdir}
 install -m 0644 contrib/systemd/qemu-pr-helper.socket %{buildroot}%{_unitdir}
 
+# We do not support gl display devices so we can remove their modules as they
+# do not have expected functionality included.
+#
+# https://gitlab.com/qemu-project/qemu/-/issues/1352 was filed to stop building these
+# modules in case all dependencies are not satisfied.
+
+rm -rf %{buildroot}%{_libdir}/%{name}/hw-display-virtio-gpu-gl.so
+rm -rf %{buildroot}%{_libdir}/%{name}/hw-display-virtio-gpu-pci-gl.so
+rm -rf %{buildroot}%{_libdir}/%{name}/hw-display-virtio-vga-gl.so
+
 # We need to make the block device modules and other qemu SO files executable
 # otherwise RPM won't pick up their dependencies.
 chmod +x %{buildroot}%{_libdir}/%{name}/*.so
@@ -1417,12 +1297,6 @@ rm -rf %{buildroot}%{qemudocdir}/specs
 # endif !tools_only
 %endif
 
-%if %{have_virgl}
-# Move vhost-user JSON files to the standard "qemu" directory
-mkdir -p %{buildroot}%{_datadir}/qemu
-mv %{buildroot}%{_datadir}/%{name}/vhost-user %{buildroot}%{_datadir}/qemu/
-%endif
-
 %check
 %if !%{tools_only}
 
@@ -1567,37 +1441,20 @@ useradd -r -u 107 -g qemu -G kvm -d / -s /sbin/nologin \
     %{_libdir}/%{name}/accel-tcg-%{kvm_target}.so
 %endif
 
-%if %{have_virgl}
-%files device-display-vhost-user-gpu
-    %{_datadir}/qemu/vhost-user/50-qemu-gpu.json
-    %{_libexecdir}/vhost-user-gpu
-%endif
-
 %files device-display-virtio-gpu
 %{_libdir}/%{name}/hw-display-virtio-gpu.so
 
-%ifarch x86_64 aarch64 %{power64}
-%files device-display-virtio-gpu-gl
-    %{_libdir}/%{name}/hw-display-virtio-gpu-gl.so
-%endif
-
 %ifarch s390x
 %files device-display-virtio-gpu-ccw
     %{_libdir}/%{name}/hw-s390x-virtio-gpu-ccw.so
 %else
 %files device-display-virtio-gpu-pci
     %{_libdir}/%{name}/hw-display-virtio-gpu-pci.so
-%ifarch x86_64 aarch64 %{power64}
-%files device-display-virtio-gpu-pci-gl
-    %{_libdir}/%{name}/hw-display-virtio-gpu-pci-gl.so
-%endif
 %endif
 
 %ifarch x86_64 %{power64}
 %files device-display-virtio-vga
     %{_libdir}/%{name}/hw-display-virtio-vga.so
-%files device-display-virtio-vga-gl
-    %{_libdir}/%{name}/hw-display-virtio-vga-gl.so
 %endif
 
 %files tests
@@ -1609,43 +1466,13 @@ useradd -r -u 107 -g qemu -G kvm -d / -s /sbin/nologin \
 
 %files block-curl
 %{_libdir}/%{name}/block-curl.so
-
-%if %{have_block_gluster}
-%files block-gluster
-    %{_libdir}/%{name}/block-gluster.so
-%endif
-
-%if %{have_block_iscsi}
-%files block-iscsi
-    %{_libdir}/qemu-kvm/block-iscsi.so
-%endif
-
 %if %{have_block_rbd}
 %files block-rbd
 %{_libdir}/%{name}/block-rbd.so
 %endif
-
-%if %{have_block_ssh}
-%files block-ssh
-    %{_libdir}/qemu-kvm/block-ssh.so
-%endif
-
 %files audio-pa
 %{_libdir}/%{name}/audio-pa.so
 
-%if 0%{have_spice}
-%files ui-spice
-    %{_libdir}/qemu-kvm/audio-spice.so
-    %{_libdir}/qemu-kvm/chardev-spice.so
-    %{_libdir}/qemu-kvm/ui-spice-core.so
-    %{_libdir}/qemu-kvm/ui-spice-app.so
-    %{_libdir}/qemu-kvm/hw-usb-smartcard.so
-%ifarch x86_64 aarch64
-    %{_libdir}/qemu-kvm/hw-display-qxl.so
-%endif
-%endif
-
-
 %if %{have_opengl}
 %files ui-opengl
 %{_libdir}/%{name}/ui-opengl.so
@@ -1671,10 +1498,6 @@ useradd -r -u 107 -g qemu -G kvm -d / -s /sbin/nologin \
 %endif
 
 %changelog
-* Tue Nov 26 2024 Eduard Basov <ebasov@msvsphere-os.ru> - 9.0.0-10.inferit
-- added SPICE on new release
-- Added host_cdrom driver to whitelist (INF-741)
-
 * Mon Sep 02 2024 Miroslav Rezanina <mrezanin@redhat.com> - 9.0.0-10
 - kvm-nbd-server-CVE-2024-7409-Avoid-use-after-free-when-c.patch [RHEL-52617]
 - Resolves: RHEL-52617
@@ -2473,9 +2296,6 @@ useradd -r -u 107 -g qemu -G kvm -d / -s /sbin/nologin \
 - Resolves: bz#2156876
   ([virtual network][rhel7.9_guest] qemu-kvm: vhost vring error in virtqueue 1: Invalid argument (22))
 
-* Wed Mar 15 2023 MSVSphere Packaging Team <packager@msvsphere.ru> - 7.2.0-12
-- Rebuilt for MSVSphere 9.1.
-
 * Sun Mar 12 2023 Miroslav Rezanina <mrezanin@redhat.com> - 7.2.0-12
 - kvm-scsi-protect-req-aiocb-with-AioContext-lock.patch [bz#2155748]
 - kvm-dma-helpers-prevent-dma_blk_cb-vs-dma_aio_cancel-rac.patch [bz#2155748]