Compare commits

...

No commits in common. 'c9' and 'i8c' have entirely different histories.
c9 ... i8c

2
.gitignore vendored

@ -1 +1 @@
SOURCES/mpfr-4.1.0.tar.xz
SOURCES/mpfr-3.1.6.tar.xz

@ -1 +1 @@
159c3a58705662bfde4dc93f2617f3660855ead6 SOURCES/mpfr-4.1.0.tar.xz
f9178ddc0c470faa2e063b3185c4488ad0f74df8 SOURCES/mpfr-3.1.6.tar.xz

File diff suppressed because it is too large Load Diff

@ -0,0 +1,285 @@
diff -Naurd mpfr-3.1.6-a/PATCHES mpfr-3.1.6-b/PATCHES
--- mpfr-3.1.6-a/PATCHES 2017-10-26 13:55:51.168013439 +0000
+++ mpfr-3.1.6-b/PATCHES 2017-10-26 13:55:51.236013121 +0000
@@ -0,0 +1 @@
+mpfr_get
diff -Naurd mpfr-3.1.6-a/VERSION mpfr-3.1.6-b/VERSION
--- mpfr-3.1.6-a/VERSION 2017-09-07 11:36:44.000000000 +0000
+++ mpfr-3.1.6-b/VERSION 2017-10-26 13:55:51.236013121 +0000
@@ -1 +1 @@
-3.1.6
+3.1.6-p1
diff -Naurd mpfr-3.1.6-a/src/get_ld.c mpfr-3.1.6-b/src/get_ld.c
--- mpfr-3.1.6-a/src/get_ld.c 2017-01-01 01:39:09.000000000 +0000
+++ mpfr-3.1.6-b/src/get_ld.c 2017-10-26 13:55:51.208013252 +0000
@@ -41,6 +41,9 @@
mpfr_exp_t sh; /* exponent shift, so that x/2^sh is in the double range */
mpfr_t y, z;
int sign;
+ MPFR_SAVE_EXPO_DECL (expo);
+
+ MPFR_SAVE_EXPO_MARK (expo);
/* first round x to the target long double precision, so that
all subsequent operations are exact (this avoids double rounding
@@ -103,6 +106,7 @@
}
if (sign < 0)
r = -r;
+ MPFR_SAVE_EXPO_FREE (expo);
return r;
}
}
diff -Naurd mpfr-3.1.6-a/src/get_si.c mpfr-3.1.6-b/src/get_si.c
--- mpfr-3.1.6-a/src/get_si.c 2017-01-01 01:39:09.000000000 +0000
+++ mpfr-3.1.6-b/src/get_si.c 2017-10-26 13:55:51.208013252 +0000
@@ -28,6 +28,7 @@
mpfr_prec_t prec;
long s;
mpfr_t x;
+ MPFR_SAVE_EXPO_DECL (expo);
if (MPFR_UNLIKELY (!mpfr_fits_slong_p (f, rnd)))
{
@@ -39,14 +40,22 @@
if (MPFR_IS_ZERO (f))
return (long) 0;
- /* determine prec of long */
- for (s = LONG_MIN, prec = 0; s != 0; s /= 2, prec++)
+ /* Determine the precision of long. |LONG_MIN| may have one more bit
+ as an integer, but in this case, this is a power of 2, thus fits
+ in a precision-prec floating-point number. */
+ for (s = LONG_MAX, prec = 0; s != 0; s /= 2, prec++)
{ }
+ MPFR_SAVE_EXPO_MARK (expo);
+
/* first round to prec bits */
mpfr_init2 (x, prec);
mpfr_rint (x, f, rnd);
+ /* The flags from mpfr_rint are the wanted ones. In particular,
+ it sets the inexact flag when necessary. */
+ MPFR_SAVE_EXPO_UPDATE_FLAGS (expo, __gmpfr_flags);
+
/* warning: if x=0, taking its exponent is illegal */
if (MPFR_UNLIKELY (MPFR_IS_ZERO(x)))
s = 0;
@@ -65,5 +74,7 @@
mpfr_clear (x);
+ MPFR_SAVE_EXPO_FREE (expo);
+
return s;
}
diff -Naurd mpfr-3.1.6-a/src/get_sj.c mpfr-3.1.6-b/src/get_sj.c
--- mpfr-3.1.6-a/src/get_sj.c 2017-01-01 01:39:09.000000000 +0000
+++ mpfr-3.1.6-b/src/get_sj.c 2017-10-26 13:55:51.208013252 +0000
@@ -35,6 +35,7 @@
intmax_t r;
mpfr_prec_t prec;
mpfr_t x;
+ MPFR_SAVE_EXPO_DECL (expo);
if (MPFR_UNLIKELY (!mpfr_fits_intmax_p (f, rnd)))
{
@@ -46,20 +47,24 @@
if (MPFR_IS_ZERO (f))
return (intmax_t) 0;
- /* determine the precision of intmax_t */
- for (r = MPFR_INTMAX_MIN, prec = 0; r != 0; r /= 2, prec++)
+ /* Determine the precision of intmax_t. |INTMAX_MIN| may have one
+ more bit as an integer, but in this case, this is a power of 2,
+ thus fits in a precision-prec floating-point number. */
+ for (r = MPFR_INTMAX_MAX, prec = 0; r != 0; r /= 2, prec++)
{ }
- /* Note: though INTMAX_MAX would have been sufficient for the conversion,
- we chose INTMAX_MIN so that INTMAX_MIN - 1 is always representable in
- precision prec; this is useful to detect overflows in MPFR_RNDZ (will
- be needed later). */
- /* Now, r = 0. */
+ MPFR_ASSERTD (r == 0);
+
+ MPFR_SAVE_EXPO_MARK (expo);
mpfr_init2 (x, prec);
mpfr_rint (x, f, rnd);
MPFR_ASSERTN (MPFR_IS_FP (x));
+ /* The flags from mpfr_rint are the wanted ones. In particular,
+ it sets the inexact flag when necessary. */
+ MPFR_SAVE_EXPO_UPDATE_FLAGS (expo, __gmpfr_flags);
+
if (MPFR_NOTZERO (x))
{
mp_limb_t *xp;
@@ -67,15 +72,15 @@
xp = MPFR_MANT (x);
sh = MPFR_GET_EXP (x);
- MPFR_ASSERTN ((mpfr_prec_t) sh <= prec);
+ MPFR_ASSERTN ((mpfr_prec_t) sh <= prec + 1);
if (MPFR_INTMAX_MIN + MPFR_INTMAX_MAX != 0
- && MPFR_UNLIKELY ((mpfr_prec_t) sh == prec))
+ && MPFR_UNLIKELY ((mpfr_prec_t) sh > prec))
{
/* 2's complement and x <= INTMAX_MIN: in the case mp_limb_t
has the same size as intmax_t, we cannot use the code in
the for loop since the operations would be performed in
unsigned arithmetic. */
- MPFR_ASSERTN (MPFR_IS_NEG (x) && (mpfr_powerof2_raw (x)));
+ MPFR_ASSERTN (MPFR_IS_NEG (x) && mpfr_powerof2_raw (x));
r = MPFR_INTMAX_MIN;
}
else if (MPFR_IS_POS (x))
@@ -117,6 +122,8 @@
mpfr_clear (x);
+ MPFR_SAVE_EXPO_FREE (expo);
+
return r;
}
diff -Naurd mpfr-3.1.6-a/src/get_ui.c mpfr-3.1.6-b/src/get_ui.c
--- mpfr-3.1.6-a/src/get_ui.c 2017-01-01 01:39:09.000000000 +0000
+++ mpfr-3.1.6-b/src/get_ui.c 2017-10-26 13:55:51.208013252 +0000
@@ -30,6 +30,7 @@
mpfr_t x;
mp_size_t n;
mpfr_exp_t exp;
+ MPFR_SAVE_EXPO_DECL (expo);
if (MPFR_UNLIKELY (!mpfr_fits_ulong_p (f, rnd)))
{
@@ -44,10 +45,16 @@
for (s = ULONG_MAX, prec = 0; s != 0; s /= 2, prec ++)
{ }
+ MPFR_SAVE_EXPO_MARK (expo);
+
/* first round to prec bits */
mpfr_init2 (x, prec);
mpfr_rint (x, f, rnd);
+ /* The flags from mpfr_rint are the wanted ones. In particular,
+ it sets the inexact flag when necessary. */
+ MPFR_SAVE_EXPO_UPDATE_FLAGS (expo, __gmpfr_flags);
+
/* warning: if x=0, taking its exponent is illegal */
if (MPFR_IS_ZERO(x))
s = 0;
@@ -61,5 +68,7 @@
mpfr_clear (x);
+ MPFR_SAVE_EXPO_FREE (expo);
+
return s;
}
diff -Naurd mpfr-3.1.6-a/src/get_uj.c mpfr-3.1.6-b/src/get_uj.c
--- mpfr-3.1.6-a/src/get_uj.c 2017-01-01 01:39:09.000000000 +0000
+++ mpfr-3.1.6-b/src/get_uj.c 2017-10-26 13:55:51.208013252 +0000
@@ -35,6 +35,7 @@
uintmax_t r;
mpfr_prec_t prec;
mpfr_t x;
+ MPFR_SAVE_EXPO_DECL (expo);
if (MPFR_UNLIKELY (!mpfr_fits_uintmax_p (f, rnd)))
{
@@ -50,12 +51,18 @@
for (r = MPFR_UINTMAX_MAX, prec = 0; r != 0; r /= 2, prec++)
{ }
- /* Now, r = 0. */
+ MPFR_ASSERTD (r == 0);
+
+ MPFR_SAVE_EXPO_MARK (expo);
mpfr_init2 (x, prec);
mpfr_rint (x, f, rnd);
MPFR_ASSERTN (MPFR_IS_FP (x));
+ /* The flags from mpfr_rint are the wanted ones. In particular,
+ it sets the inexact flag when necessary. */
+ MPFR_SAVE_EXPO_UPDATE_FLAGS (expo, __gmpfr_flags);
+
if (MPFR_NOTZERO (x))
{
mp_limb_t *xp;
@@ -76,6 +83,8 @@
mpfr_clear (x);
+ MPFR_SAVE_EXPO_FREE (expo);
+
return r;
}
diff -Naurd mpfr-3.1.6-a/src/get_z.c mpfr-3.1.6-b/src/get_z.c
--- mpfr-3.1.6-a/src/get_z.c 2017-01-01 01:39:09.000000000 +0000
+++ mpfr-3.1.6-b/src/get_z.c 2017-10-26 13:55:51.208013252 +0000
@@ -29,6 +29,7 @@
int inex;
mpfr_t r;
mpfr_exp_t exp;
+ MPFR_SAVE_EXPO_DECL (expo);
if (MPFR_UNLIKELY (MPFR_IS_SINGULAR (f)))
{
@@ -41,6 +42,8 @@
return 0;
}
+ MPFR_SAVE_EXPO_MARK (expo);
+
exp = MPFR_GET_EXP (f);
/* if exp <= 0, then |f|<1, thus |o(f)|<=1 */
MPFR_ASSERTN (exp < 0 || exp <= MPFR_PREC_MAX);
@@ -50,6 +53,11 @@
MPFR_ASSERTN (inex != 1 && inex != -1); /* integral part of f is
representable in r */
MPFR_ASSERTN (MPFR_IS_FP (r));
+
+ /* The flags from mpfr_rint are the wanted ones. In particular,
+ it sets the inexact flag when necessary. */
+ MPFR_SAVE_EXPO_UPDATE_FLAGS (expo, __gmpfr_flags);
+
exp = mpfr_get_z_2exp (z, r);
if (exp >= 0)
mpz_mul_2exp (z, z, exp);
@@ -57,5 +65,7 @@
mpz_fdiv_q_2exp (z, z, -exp);
mpfr_clear (r);
+ MPFR_SAVE_EXPO_FREE (expo);
+
return inex;
}
diff -Naurd mpfr-3.1.6-a/src/mpfr.h mpfr-3.1.6-b/src/mpfr.h
--- mpfr-3.1.6-a/src/mpfr.h 2017-09-07 11:36:44.000000000 +0000
+++ mpfr-3.1.6-b/src/mpfr.h 2017-10-26 13:55:51.232013138 +0000
@@ -27,7 +27,7 @@
#define MPFR_VERSION_MAJOR 3
#define MPFR_VERSION_MINOR 1
#define MPFR_VERSION_PATCHLEVEL 6
-#define MPFR_VERSION_STRING "3.1.6"
+#define MPFR_VERSION_STRING "3.1.6-p1"
/* Macros dealing with MPFR VERSION */
#define MPFR_VERSION_NUM(a,b,c) (((a) << 16L) | ((b) << 8) | (c))
diff -Naurd mpfr-3.1.6-a/src/version.c mpfr-3.1.6-b/src/version.c
--- mpfr-3.1.6-a/src/version.c 2017-09-07 11:36:44.000000000 +0000
+++ mpfr-3.1.6-b/src/version.c 2017-10-26 13:55:51.232013138 +0000
@@ -25,5 +25,5 @@
const char *
mpfr_get_version (void)
{
- return "3.1.6";
+ return "3.1.6-p1";
}

@ -0,0 +1,111 @@
diff -Naurd mpfr-3.1.6-a/PATCHES mpfr-3.1.6-b/PATCHES
--- mpfr-3.1.6-a/PATCHES 2017-12-15 12:37:44.074256548 +0000
+++ mpfr-3.1.6-b/PATCHES 2017-12-15 12:37:44.146256304 +0000
@@ -0,0 +1 @@
+root
diff -Naurd mpfr-3.1.6-a/VERSION mpfr-3.1.6-b/VERSION
--- mpfr-3.1.6-a/VERSION 2017-10-26 13:55:51.236013121 +0000
+++ mpfr-3.1.6-b/VERSION 2017-12-15 12:37:44.142256319 +0000
@@ -1 +1 @@
-3.1.6-p1
+3.1.6-p2
diff -Naurd mpfr-3.1.6-a/src/mpfr.h mpfr-3.1.6-b/src/mpfr.h
--- mpfr-3.1.6-a/src/mpfr.h 2017-10-26 13:55:51.232013138 +0000
+++ mpfr-3.1.6-b/src/mpfr.h 2017-12-15 12:37:44.142256319 +0000
@@ -27,7 +27,7 @@
#define MPFR_VERSION_MAJOR 3
#define MPFR_VERSION_MINOR 1
#define MPFR_VERSION_PATCHLEVEL 6
-#define MPFR_VERSION_STRING "3.1.6-p1"
+#define MPFR_VERSION_STRING "3.1.6-p2"
/* Macros dealing with MPFR VERSION */
#define MPFR_VERSION_NUM(a,b,c) (((a) << 16L) | ((b) << 8) | (c))
diff -Naurd mpfr-3.1.6-a/src/root.c mpfr-3.1.6-b/src/root.c
--- mpfr-3.1.6-a/src/root.c 2017-01-01 01:39:09.000000000 +0000
+++ mpfr-3.1.6-b/src/root.c 2017-12-15 12:37:44.118256398 +0000
@@ -107,6 +107,11 @@
MPFR_RET_NAN;
}
+ /* Special case |x| = 1. Note that if x = -1, then k is odd
+ (NaN results have already been filtered), so that y = -1. */
+ if (mpfr_cmpabs (x, __gmpfr_one) == 0)
+ return mpfr_set (y, x, rnd_mode);
+
/* General case */
/* For large k, use exp(log(x)/k). The threshold of 100 seems to be quite
@@ -188,6 +193,14 @@
Assume all special cases have been eliminated before.
In the extended exponent range, overflows/underflows are not possible.
Assume x > 0, or x < 0 and k odd.
+ Also assume |x| <> 1 because log(1) = 0, which does not have an exponent
+ and would yield a failure in the error bound computation. A priori, this
+ constraint is quite artificial because if |x| is close enough to 1, then
+ the exponent of log|x| does not need to be used (in the code, err would
+ be 1 in such a domain). So this constraint |x| <> 1 could be avoided in
+ the code. However, this is an exact case easy to detect, so that such a
+ change would be useless. Values very close to 1 are not an issue, since
+ an underflow is not possible before the MPFR_GET_EXP.
*/
static int
mpfr_root_aux (mpfr_ptr y, mpfr_srcptr x, unsigned long k, mpfr_rnd_t rnd_mode)
@@ -219,7 +232,8 @@
mpfr_log (t, absx, MPFR_RNDN);
/* t = log|x| * (1 + theta) with |theta| <= 2^(-w) */
mpfr_div_ui (t, t, k, MPFR_RNDN);
- expt = MPFR_GET_EXP (t);
+ /* No possible underflow in mpfr_log and mpfr_div_ui. */
+ expt = MPFR_GET_EXP (t); /* assumes t <> 0 */
/* t = log|x|/k * (1 + theta) + eps with |theta| <= 2^(-w)
and |eps| <= 1/2 ulp(t), thus the total error is bounded
by 1.5 * 2^(expt - w) */
diff -Naurd mpfr-3.1.6-a/src/version.c mpfr-3.1.6-b/src/version.c
--- mpfr-3.1.6-a/src/version.c 2017-10-26 13:55:51.232013138 +0000
+++ mpfr-3.1.6-b/src/version.c 2017-12-15 12:37:44.142256319 +0000
@@ -25,5 +25,5 @@
const char *
mpfr_get_version (void)
{
- return "3.1.6-p1";
+ return "3.1.6-p2";
}
diff -Naurd mpfr-3.1.6-a/tests/troot.c mpfr-3.1.6-b/tests/troot.c
--- mpfr-3.1.6-a/tests/troot.c 2017-01-01 01:39:09.000000000 +0000
+++ mpfr-3.1.6-b/tests/troot.c 2017-12-15 12:37:44.118256398 +0000
@@ -405,6 +405,26 @@
mpfr_clears (x, y1, y2, (mpfr_ptr) 0);
}
+static void
+bug20171214 (void)
+{
+ mpfr_t x, y;
+ int inex;
+
+ mpfr_init2 (x, 805);
+ mpfr_init2 (y, 837);
+ mpfr_set_ui (x, 1, MPFR_RNDN);
+ inex = mpfr_root (y, x, 120, MPFR_RNDN);
+ MPFR_ASSERTN (inex == 0);
+ MPFR_ASSERTN (mpfr_cmp_ui (y, 1) == 0);
+ mpfr_set_si (x, -1, MPFR_RNDN);
+ inex = mpfr_root (y, x, 121, MPFR_RNDN);
+ MPFR_ASSERTN (inex == 0);
+ MPFR_ASSERTN (mpfr_cmp_si (y, -1) == 0);
+ mpfr_clear (x);
+ mpfr_clear (y);
+}
+
int
main (void)
{
@@ -415,6 +435,7 @@
tests_start_mpfr ();
+ bug20171214 ();
exact_powers (3, 1000);
special ();
bigint ();

@ -1,29 +1,24 @@
Summary: C library for multiple-precision floating-point computations
Summary: A C library for multiple-precision floating-point computations
Name: mpfr
Version: 4.1.0
Release: 7%{?dist}
URL: https://www.mpfr.org/
License: LGPLv3+
BuildRequires: gmp-devel gcc make
Source0: https://www.mpfr.org/%{name}-%{version}/%{name}-%{version}.tar.xz
# Upstream post-release patches. This currently contains:
# - decimal128-conv.patch
# - random_deviate.patch
# - set_z_2exp-overflow.patch
# - prototypes.patch
# - digamma-hugemem.patch
# - digamma-interm-zero.patch
# - jn-interm-zero.patch
# - digamma-interm-zero2.patch
# - jyn-asympt-interm-zero.patch
Patch0: https://www.mpfr.org/%{name}-%{version}/allpatches
# This can be removed when F32 reaches EOL
Obsoletes: mpfr3 < 4.0.0
Provides: mpfr3 = %{version}-%{release}
Version: 3.1.6
Release: 1%{?dist}
URL: http://www.mpfr.org/
# GFDL (mpfr.texi, mpfr.info and fdl.texi)
License: LGPLv3+ and GPLv3+ and GFDL
BuildRequires: autoconf libtool gmp-devel gcc
Requires(post): /sbin/ldconfig
Requires(postun): /sbin/ldconfig
Requires: gmp >= 4.2.3
Source0: http://www.mpfr.org/%{name}-%{version}/%{name}-%{version}.tar.xz
# https://gforge.inria.fr/scm/viewvc.php/mpfr?revision=11783&view=revision
# http://www.mpfr.org/mpfr-3.1.6/patch01
Patch0: rev11783.patch
# https://gforge.inria.fr/scm/viewvc.php/mpfr?revision=11982&view=revision
# http://www.mpfr.org/mpfr-3.1.6/patch02
Patch1: rev11982.patch
%description
The MPFR library is a C library for multiple-precision floating-point
@ -34,12 +29,10 @@ ANSI/IEEE-754 standard for double-precision floating-point arithmetic
%package devel
Summary: Development files for the MPFR library
Requires: %{name}%{?_isa} = %{version}-%{release}
Requires: gmp-devel%{?_isa}
# This can be removed when F32 reaches EOL
Obsoletes: mpfr3-devel < 4.0.0
Provides: mpfr3-devel = %{version}-%{release}
Requires: %{name} = %{version}-%{release}
Requires(post): /sbin/install-info
Requires(preun): /sbin/install-info
Requires: gmp-devel
%description devel
Header files and documentation for using the MPFR
@ -49,123 +42,54 @@ If you want to develop applications which will use the MPFR library,
you'll need to install the mpfr-devel package. You'll also need to
install the mpfr package.
%package doc
Summary: Documentation for the MPFR library
License: GFDL
BuildArch: noarch
%description doc
Documentation for the MPFR library.
%prep
%autosetup -p1
%build
%configure --disable-assert --disable-static
# Get rid of undesirable hardcoded rpaths; workaround libtool reordering
# -Wl,--as-needed after all the libraries.
sed -e 's|^hardcode_libdir_flag_spec=.*|hardcode_libdir_flag_spec=""|g' \
-e 's|^runpath_var=LD_RUN_PATH|runpath_var=DIE_RPATH_DIE|g' \
-e 's|CC="\(g..\)"|CC="\1 -Wl,--as-needed"|' \
-i libtool
%make_build
make %{?_smp_mflags}
%install
%make_install
cp -p PATCHES README %{buildroot}%{_pkgdocdir}
rm -f %{buildroot}%{_libdir}/*.la
rm -f %{buildroot}%{_infodir}/dir
make install DESTDIR=$RPM_BUILD_ROOT
rm -f $RPM_BUILD_ROOT%{_libdir}/libmpfr.la
rm -f $RPM_BUILD_ROOT%{_infodir}/dir
#these go into licenses, not doc
rm -f %{buildroot}%{_pkgdocdir}/COPYING{,.LESSER}
rm -f $RPM_BUILD_ROOT%{_pkgdocdir}/COPYING $RPM_BUILD_ROOT%{_pkgdocdir}/COPYING.LESSER
%check
export LD_LIBRARY_PATH=%{buildroot}%{_libdir}
%make_build check
make %{?_smp_mflags} check
%post -p /sbin/ldconfig
%postun -p /sbin/ldconfig
%post devel
if [ -f %{_infodir}/mpfr.info.gz ]; then
/sbin/install-info %{_infodir}/mpfr.info.gz %{_infodir}/dir || :
fi
%preun devel
if [ "$1" = 0 ]; then
if [ -f %{_infodir}/mpfr.info.gz ]; then
/sbin/install-info --delete %{_infodir}/mpfr.info.gz %{_infodir}/dir || :
fi
fi
%files
%license COPYING COPYING.LESSER
%{_pkgdocdir}/BUGS
%{_pkgdocdir}/NEWS
%{_pkgdocdir}/PATCHES
%{_pkgdocdir}/README
%{_libdir}/libmpfr.so.6*
%doc NEWS README AUTHORS BUGS TODO doc/FAQ.html
%{_libdir}/libmpfr.so.*
%files devel
%{_libdir}/libmpfr.so
%{_includedir}/mpfr.h
%{_includedir}/mpf2mpfr.h
%{_libdir}/pkgconfig/mpfr.pc
%files doc
%{_pkgdocdir}/AUTHORS
%{_pkgdocdir}/examples
%{_pkgdocdir}/FAQ.html
%{_pkgdocdir}/TODO
%{_libdir}/libmpfr.so
%{_includedir}/*.h
%{_infodir}/mpfr.info*
%changelog
* Mon Aug 09 2021 Mohan Boddu <mboddu@redhat.com> - 4.1.0-7
- Rebuilt for IMA sigs, glibc 2.34, aarch64 flags
Related: rhbz#1991688
* Fri Apr 16 2021 Mohan Boddu <mboddu@redhat.com> - 4.1.0-6
- Rebuilt for RHEL 9 BETA on Apr 15th 2021. Related: rhbz#1947937
* Tue Mar 9 2021 Jerry James <loganjerry@gmail.com> - 4.1.0-5
- Add upstream patches 8-9
* Wed Feb 17 2021 Jerry James <loganjerry@gmail.com> - 4.1.0-4
- Add upstream patches 1-7
* Tue Jan 26 2021 Fedora Release Engineering <releng@fedoraproject.org> - 4.1.0-3
- Rebuilt for https://fedoraproject.org/wiki/Fedora_34_Mass_Rebuild
* Tue Jul 28 2020 Fedora Release Engineering <releng@fedoraproject.org> - 4.1.0-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_33_Mass_Rebuild
* Sat Jul 11 2020 Jerry James <loganjerry@gmail.com> - 4.1.0-1
- Update to MPFR version 4.1.0
- Drop all patches
* Mon Jun 29 2020 Jerry James <loganjerry@gmail.com> - 4.0.2-5
- Add upstream patches 8 and 9
* Thu Apr 16 2020 Jerry James <loganjerry@gmail.com> - 4.0.2-4
- Add upstream patches 2 through 7
* Wed Jan 29 2020 Fedora Release Engineering <releng@fedoraproject.org> - 4.0.2-3
- Rebuilt for https://fedoraproject.org/wiki/Fedora_32_Mass_Rebuild
* Fri Oct 11 2019 Jerry James <loganjerry@gmail.com> - 4.0.2-2
- Drop the mpfr3 and mpfr3-devel subpackages
* Tue Oct 8 2019 Jerry James <loganjerry@gmail.com> - 4.0.2-1
- Update to MPFR version 4.0.2 plus patch01
- Make mpfr3 and mpfr3-devel subpackages for version 3.1.6
- Add a -doc subpackage to hold the GFDL-licensed content
- The main package license is LGPLv3+; the GPLv3+ content is not packaged
- Drop unnecessary autoconf and libtool BRs
- Drop explicit R on gmp; it is autogenerated
- Drop info scriptlets; this version can never appear in Fedora < 32 or RHEL < 9
- Drop ldconfig_scriptlets for the same reason
- Make sure there are no rpaths and that -Wl,--as-needed takes effect
- Do not use the %%doc macro; the files have already been copied
* Thu Jul 25 2019 Fedora Release Engineering <releng@fedoraproject.org> - 3.1.6-5
- Rebuilt for https://fedoraproject.org/wiki/Fedora_31_Mass_Rebuild
* Fri Feb 01 2019 Fedora Release Engineering <releng@fedoraproject.org> - 3.1.6-4
- Rebuilt for https://fedoraproject.org/wiki/Fedora_30_Mass_Rebuild
* Tue Oct 30 2018 Rex Dieter <rdieter@fedoraproject.org> - 3.1.6-3
- update scriptlets (#1644106)
- use %%make_build %%make_install
* Fri Jul 13 2018 Fedora Release Engineering <releng@fedoraproject.org> - 3.1.6-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
* Wed Jul 26 2023 MSVSphere Packaging Team <packager@msvsphere.ru> - 3.1.6-1
- Rebuilt for MSVSphere 8.8
* Sun Feb 25 2018 James Paul Turner <jamesturner246@fedoraproject.org> - 3.1.6-1
- Update to MPFR version 3.1.6

Loading…
Cancel
Save