import kexec-tools-2.0.27-16.el9_5.1

SOURCES/dracut-module-setup.sh

@@ -494,6 +494,24 @@ _find_znet_nmconnection() {
         "$1"/*.nmconnection | LC_ALL=C sed -e "$2"
 }
 
+kdump_setup_ovs() {
+    local _netdev="$1"
+    local _dev _phy_if
+
+    _phy_if=$(ovs_find_phy_if "$_netdev")
+
+    if kdump_is_bridge "$_phy_if"; then
+        kdump_setup_vlan "$_phy_if"
+    elif kdump_is_bond "$_phy_if"; then
+        kdump_setup_bond "$_phy_if" || return 1
+    elif kdump_is_team "$_phy_if"; then
+        derror "Ovs bridge over team is not supported!"
+        exit 1
+    fi
+
+    _save_kdump_netifs "$_phy_if"
+}
+
 # setup s390 znet
 #
 # Note part of code is extracted from ccw_init provided by s390utils
@@ -545,6 +563,28 @@ kdump_get_remote_ip() {
     echo "$_remote"
 }
 
+# Find the physical interface of Open vSwitch (Ovs) bridge
+#
+# The physical network interface has the same MAC address as the Ovs bridge
+ovs_find_phy_if() {
+    local _mac _dev
+    _mac=$(kdump_get_mac_addr $1)
+
+    for _dev in $(ovs-vsctl list-ifaces $1); do
+        if [[ $_mac == $(</sys/class/net/$_dev/address) ]]; then
+            echo -n "$_dev"
+            return
+        fi
+    done
+
+    return 1
+}
+
+# Tell if a network interface is an Open vSwitch (Ovs) bridge
+kdump_is_ovs_bridge() {
+    [[ $(_get_nic_driver $1) == openvswitch ]]
+}
+
 # Collect netifs needed by kdump
 # $1: destination host
 kdump_collect_netif_usage() {
@@ -568,6 +608,9 @@ kdump_collect_netif_usage() {
         kdump_setup_team "$_netdev"
     elif kdump_is_vlan "$_netdev"; then
         kdump_setup_vlan "$_netdev"
+    elif kdump_is_ovs_bridge "$_netdev"; then
+        has_ovs_bridge=yes
+        kdump_setup_ovs "$_netdev"
     fi
     _save_kdump_netifs "$_netdev"
 
@@ -614,6 +657,29 @@ kdump_install_resolv_conf() {
     fi
 }
 
+kdump_install_ovs_deps() {
+    [[ $has_ovs_bridge == yes ]] || return 0
+    inst_multiple -o $(rpm -ql NetworkManager-ovs) $(rpm -ql $(rpm -qf /usr/lib/systemd/system/openvswitch.service)) /sbin/sysctl /usr/bin/uuidgen /usr/bin/hostname /usr/bin/touch /usr/bin/expr /usr/bin/id /usr/bin/install /usr/bin/setpriv /usr/bin/nice /usr/bin/df
+    # 1. Overwrite the copied /etc/sysconfig/openvswitch so
+    # ovsdb-server.service can run as the default user root.
+    # /etc/sysconfig/openvswitch by default intructs ovsdb-server.service to
+    # run as USER=openvswitch, However openvswitch doesn't have the permission
+    # to write to /tmp in kdump initrd and ovsdb-server.servie will fail
+    # with the error "ovs-ctl[1190]: ovsdb-server: failed to create temporary
+    # file (Permission denied)". So run ovsdb-server.service as root instead
+    #
+    # 2. Bypass the error "referential integrity violation: Table Port column
+    # interfaces row" caused by we changing the connection profiles
+    echo "OPTIONS=\"--ovsdb-server-options='--disable-file-column-diff'\"" >"${initdir}/etc/sysconfig/openvswitch"
+
+    KDUMP_DROP_IN_DIR="${initdir}/etc/systemd/system/nm-initrd.service.d"
+    mkdir -p "$KDUMP_DROP_IN_DIR"
+    printf "[Unit]\nAfter=openvswitch.service\n" >$KDUMP_DROP_IN_DIR/01-after-ovs.conf
+
+    $SYSTEMCTL -q --root "$initdir" enable openvswitch.service
+    $SYSTEMCTL -q --root "$initdir" add-wants basic.target openvswitch.service
+}
+
 # Setup dracut to bring up network interface that enable
 # initramfs accessing giving destination
 kdump_install_net() {
@@ -627,6 +693,7 @@ kdump_install_net() {
         kdump_install_nm_netif_allowlist "$_netifs"
         kdump_install_nic_driver "$_netifs"
         kdump_install_resolv_conf
+        kdump_install_ovs_deps
     fi
 }
 
@@ -1041,7 +1108,7 @@ remove_cpu_online_rule() {
 
 install() {
     declare -A unique_netifs ipv4_usage ipv6_usage
-    local arch
+    local arch has_ovs_bridge
 
     kdump_module_init
     kdump_install_conf

SOURCES/kdump-lib-initramfs.sh

@@ -101,15 +101,8 @@ get_fs_type_from_target()
 
 get_mntpoint_from_target()
 {
-	local SOURCE TARGET
+	# --source is applied to ensure non-bind mount is returned
-	findmnt -k --pairs -o SOURCE,TARGET "$1" | while read line; do
+	get_mount_info TARGET source "$1" -f
-		eval "$line"
-		# omit sources that are bind mounts i.e. they contain a [/path/to/subpath].
-		if [[ ! "$SOURCE" =~ \[ ]]; then
-			echo $TARGET
-			break
-		fi
-	done
 }
 
 is_ssh_dump_target()

SOURCES/kdump-lib.sh

@@ -15,7 +15,7 @@ is_uki()
 	img="$1"
 
 	[[ -f "$img" ]] || return
-	[[ "$(file -b --mime-type "$img")" == application/x-dosexec ]] || return
+	[[ "$(objdump -a "$img" 2> /dev/null)" =~ pei-(x86-64|aarch64-little) ]] || return
 	objdump -h -j .linux "$img" &> /dev/null
 }
 
@@ -213,7 +213,7 @@ get_bind_mount_source()
 
 	_fsroot=${_src#${_src_nofsroot}[}
 	_fsroot=${_fsroot%]}
-	_mnt=$(get_mntpoint_from_target "$_src_nofsroot")
+	_mnt=$(get_mount_info TARGET source "$_src_nofsroot" -f)
 
 	# for btrfs, _fsroot will also contain the subvol value as well, strip it
 	if [[ $_fstype == btrfs ]]; then

SOURCES/kdump.sysconfig

@@ -21,7 +21,7 @@ KDUMP_COMMANDLINE_REMOVE="hugepages hugepagesz slub_debug quiet log_buf_len swio
 
 # This variable lets us append arguments to the current kdump commandline
 # after processed by KDUMP_COMMANDLINE_REMOVE
-KDUMP_COMMANDLINE_APPEND="irqpoll maxcpus=1 reset_devices novmcoredd cma=0 hugetlb_cma=0"
+KDUMP_COMMANDLINE_APPEND="irqpoll nr_cpus=1 reset_devices novmcoredd cma=0 hugetlb_cma=0"
 
 # Any additional kexec arguments required.  In most situations, this should
 # be left empty

SOURCES/kdump.sysconfig.ppc64

@@ -21,7 +21,7 @@ KDUMP_COMMANDLINE_REMOVE="hugepages hugepagesz slub_debug quiet log_buf_len swio
 
 # This variable lets us append arguments to the current kdump commandline
 # after processed by KDUMP_COMMANDLINE_REMOVE
-KDUMP_COMMANDLINE_APPEND="irqpoll maxcpus=1 noirqdistrib reset_devices cgroup_disable=memory numa=off udev.children-max=2 ehea.use_mcs=0 panic=10 kvm_cma_resv_ratio=0 transparent_hugepage=never novmcoredd hugetlb_cma=0"
+KDUMP_COMMANDLINE_APPEND="irqpoll nr_cpus=1 noirqdistrib reset_devices cgroup_disable=memory numa=off udev.children-max=2 ehea.use_mcs=0 panic=10 kvm_cma_resv_ratio=0 transparent_hugepage=never novmcoredd hugetlb_cma=0"
 
 # Any additional kexec arguments required.  In most situations, this should
 # be left empty

SOURCES/kdump.sysconfig.ppc64le

@@ -21,7 +21,7 @@ KDUMP_COMMANDLINE_REMOVE="hugepages hugepagesz slub_debug quiet log_buf_len swio
 
 # This variable lets us append arguments to the current kdump commandline
 # after processed by KDUMP_COMMANDLINE_REMOVE
-KDUMP_COMMANDLINE_APPEND="irqpoll maxcpus=1 noirqdistrib reset_devices cgroup_disable=memory numa=off udev.children-max=2 ehea.use_mcs=0 panic=10 kvm_cma_resv_ratio=0 transparent_hugepage=never novmcoredd hugetlb_cma=0"
+KDUMP_COMMANDLINE_APPEND="irqpoll nr_cpus=1 noirqdistrib reset_devices cgroup_disable=memory numa=off udev.children-max=2 ehea.use_mcs=0 panic=10 kvm_cma_resv_ratio=0 transparent_hugepage=never novmcoredd hugetlb_cma=0"
 
 # Any additional kexec arguments required.  In most situations, this should
 # be left empty

SOURCES/kdump.sysconfig.x86_64

@@ -21,7 +21,7 @@ KDUMP_COMMANDLINE_REMOVE="hugepages hugepagesz slub_debug quiet log_buf_len swio
 
 # This variable lets us append arguments to the current kdump commandline
 # after processed by KDUMP_COMMANDLINE_REMOVE
-KDUMP_COMMANDLINE_APPEND="irqpoll nr_cpus=1 reset_devices cgroup_disable=memory mce=off numa=off udev.children-max=2 panic=10 acpi_no_memhotplug transparent_hugepage=never nokaslr hest_disable novmcoredd cma=0 hugetlb_cma=0"
+KDUMP_COMMANDLINE_APPEND="irqpoll nr_cpus=1 reset_devices cgroup_disable=memory mce=off numa=off udev.children-max=2 panic=10 acpi_no_memhotplug transparent_hugepage=never nokaslr hest_disable novmcoredd cma=0 hugetlb_cma=0 pcie_ports=compat"
 
 # Any additional kexec arguments required.  In most situations, this should
 # be left empty

SOURCES/kdumpctl

@@ -5,7 +5,6 @@ KDUMP_KERNELVER=""
 KDUMP_KERNEL=""
 KDUMP_COMMANDLINE=""
 KEXEC_ARGS=""
-KDUMP_LOG_PATH="/var/log"
 MKDUMPRD="/sbin/mkdumprd -f"
 MKFADUMPRD="/sbin/mkfadumprd"
 DRACUT_MODULES_FILE="/usr/lib/dracut/modules.txt"
@@ -21,7 +20,7 @@ TARGET_INITRD=""
 DEFAULT_DUMP_MODE="kdump"
 image_time=0
 
-standard_kexec_args="-d -p"
+standard_kexec_args="-p"
 
 # Some default values in case /etc/sysconfig/kdump doesn't include
 KDUMP_COMMANDLINE_REMOVE="hugepages hugepagesz slub_debug"
@@ -639,7 +638,7 @@ function load_kdump_kernel_key()
 # as the currently running kernel.
 load_kdump()
 {
-	local ret uki
+	local uki
 
 	KEXEC_ARGS=$(prepare_kexec_args "${KEXEC_ARGS}")
 	KDUMP_COMMANDLINE=$(prepare_cmdline "${KDUMP_COMMANDLINE}" "${KDUMP_COMMANDLINE_REMOVE}" "${KDUMP_COMMANDLINE_APPEND}")
@@ -656,26 +655,12 @@ load_kdump()
 
 	ddebug "$KEXEC $KEXEC_ARGS $standard_kexec_args --command-line=$KDUMP_COMMANDLINE --initrd=$TARGET_INITRD $KDUMP_KERNEL"
 
-	# The '12' represents an intermediate temporary file descriptor
-	# to store the standard error file descriptor '2', and later
-	# restore the error file descriptor with the file descriptor '12'
-	# and release it.
-	exec 12>&2
-	exec 2>> $KDUMP_LOG_PATH/kdump.log
-	chmod 600 $KDUMP_LOG_PATH/kdump.log
-	PS4='+ $(date "+%Y-%m-%d %H:%M:%S") ${BASH_SOURCE}@${LINENO}: '
-	set -x
-
 	# shellcheck disable=SC2086
 	$KEXEC $KEXEC_ARGS $standard_kexec_args \
 		--command-line="$KDUMP_COMMANDLINE" \
 		--initrd="$TARGET_INITRD" "$KDUMP_KERNEL"
 
-	ret=$?
+	if [[ $? == 0 ]]; then
-	set +x
-	exec 2>&12 12>&-
-
-	if [[ $ret == 0 ]]; then
 		dinfo "kexec: loaded kdump kernel"
 		return 0
 	else
@@ -1658,6 +1643,7 @@ reset_crashkernel()
 
 		_old_crashkernel=$(get_grub_kernel_boot_parameter "$_kernel" crashkernel)
 		_old_fadump_val=$(get_grub_kernel_boot_parameter "$_kernel" fadump)
+		[[ "$_new_fadump_val" == off ]] && _new_fadump_val=""
 		if [[ $_old_crashkernel != "$_new_crashkernel" || $_old_fadump_val != "$_new_fadump_val" ]]; then
 			_update_kernel_cmdline "$_kernel" "$_new_crashkernel" "$_new_dump_mode" "$_new_fadump_val"
 			if [[ $_reboot != yes ]]; then

SOURCES/kdumpctl.8

@@ -62,6 +62,10 @@ grubby's kernel-path=ALL and kernel-path=DEFAULT. ppc64le supports FADump and
 supports an additional [--fadump=[on|off|nocma]] parameter to toggle FADump
 on/off.
 
+If the optional parameter [--reboot] is provided the system will automatically
+reboot for changes to take effect. If no changes were made to the kernel
+command line the reboot is omitted.
+
 Note: The memory requirements for kdump varies heavily depending on the
 used hardware and system configuration. Thus the recommended
 crashkernel might not work for your specific setup. Please test if

SOURCES/kexec-kdump-howto.txt

@@ -1016,12 +1016,7 @@ Debugging Tips
   and the second kernel.
 
   In the first kernel, you can find the historical logs with the journalctl
-  command and check kdump service debugging information. In addition, the
+  command and check kdump service debugging information.
-  'kexec -d' debugging messages are also saved to /var/log/kdump.log in the
-  first kernel. For example:
-
-  [root@ibm-z-109 ~]# ls -al /var/log/kdump.log
-  -rw-r--r--. 1 root root 63238 Oct 28 06:40 /var/log/kdump.log
 
   If you want to get the debugging information of building kdump initramfs, you
   can enable the '--debug' option for the dracut_args in the /etc/kdump.conf, and

SOURCES/kexec_file-add-kexec_file-flag-to-support-debug-prin.patch

@@ -0,0 +1,44 @@
+From 9d9cf8de8b2ad8273861a30476a46f34cd34871a Mon Sep 17 00:00:00 2001
+From: Baoquan He <bhe@redhat.com>
+Date: Tue, 14 Nov 2023 23:20:30 +0800
+Subject: [PATCH] kexec_file: add kexec_file flag to support debug printing
+Content-type: text/plain
+
+This add KEXEC_FILE_DEBUG to kexec_file_flags so that it can be passed
+to kernel when '-d' is added with kexec_file_load interface. With that
+flag enabled, kernel can enable the debugging message printing.
+
+Signed-off-by: Baoquan He <bhe@redhat.com>
+Signed-off-by: Simon Horman <horms@kernel.org>
+---
+ kexec/kexec-syscall.h | 1 +
+ kexec/kexec.c         | 1 +
+ 2 files changed, 2 insertions(+)
+
+diff --git a/kexec/kexec-syscall.h b/kexec/kexec-syscall.h
+index 2559bffb93da..73e52543e1b0 100644
+--- a/kexec/kexec-syscall.h
++++ b/kexec/kexec-syscall.h
+@@ -119,6 +119,7 @@ static inline long kexec_file_load(int kernel_fd, int initrd_fd,
+ #define KEXEC_FILE_UNLOAD	0x00000001
+ #define KEXEC_FILE_ON_CRASH	0x00000002
+ #define KEXEC_FILE_NO_INITRAMFS	0x00000004
++#define KEXEC_FILE_DEBUG	0x00000008
+ 
+ /* These values match the ELF architecture values. 
+  * Unless there is a good reason that should continue to be the case.
+diff --git a/kexec/kexec.c b/kexec/kexec.c
+index 9d0ec46e5657..222f79e3112e 100644
+--- a/kexec/kexec.c
++++ b/kexec/kexec.c
+@@ -1477,6 +1477,7 @@ int main(int argc, char *argv[])
+ 			return 0;
+ 		case OPT_DEBUG:
+ 			kexec_debug = 1;
++			kexec_file_flags |= KEXEC_FILE_DEBUG;
+ 			break;
+ 		case OPT_NOIFDOWN:
+ 			skip_ifdown = 1;
+-- 
+2.41.0
+

SPECS/kexec-tools.spec

@@ -5,7 +5,7 @@
 
 Name: kexec-tools
 Version: 2.0.27
-Release: 8%{?dist}.3
+Release: 16%{?dist}.1
 License: GPLv2
 Summary: The kexec/kdump userspace component
 
@@ -114,6 +114,7 @@ Requires:       systemd-udev%{?_isa}
 # Patches 601 onward are generic patches
 #
 Patch601: kexec-update-manpage-with-explicit-mention-of-clean-.patch
+Patch602: kexec_file-add-kexec_file-flag-to-support-debug-prin.patch
 
 %description
 kexec-tools provides /sbin/kexec binary that facilitates a new
@@ -130,6 +131,7 @@ tar -z -x -v -f %{SOURCE9}
 tar -z -x -v -f %{SOURCE19}
 
 %patch601 -p1
+%patch602 -p1
 
 %ifarch ppc
 %define archdef ARCH=ppc
@@ -408,16 +410,38 @@ fi
 %endif
 
 %changelog
-* Wed Jul 24 2024 Tao Liu <ltao@redhat.com> - 2.0.27-8.3
+* Wed Sep 18 2024 Tao Liu <ltao@redhat.com> - 2.0.27-16.1
+- Rebuild with updated release
+
+* Tue Sep 10 2024 Tao Liu <ltao@redhat.com> - 2.0.27-16
+- Revert "lib: Ensure we don't find bind mounts for device target"
+
+* Wed Aug 7 2024 Tao Liu <ltao@redhat.com> - 2.0.27-15
+- Support setting up Open vSwitch (Ovs) Bridge network
+
+* Wed Jul 24 2024 Tao Liu <ltao@redhat.com> - 2.0.27-14
 - lib: Ensure we don't find bind mounts for device target
 - dracut: Disable ostree-prepare-root
 
-* Thu Jul 4 2024 Tao Liu <ltao@redhat.com> - 2.0.27-8.2
+* Tue Jul 16 2024 Tao Liu <ltao@redhat.com> - 2.0.27-13
+- kdump-lib: Drop 'file' dependency in is_uki
+- kdumpctl.8: Add description to reset-crashkernel --reboot
+- kdumpctl: Fix misleading message and erratic reboot in reset_crashkernel
+- kdumpctl: Drop default kexec '-d' option
+
+* Thu Jun 27 2024 Tao Liu <ltao@redhat.com> - 2.0.27-12
+- ppc64le: replace kernel cmdline maxcpu=1 with nr_cpus=1
+
+* Fri May 31 2024 Tao Liu <ltao@redhat.com> - 2.0.27-11
+- sysconfig: add pcie_ports compat to KDUMP_COMMANDLINE_APPEND on x86_64
+
+* Tue May 14 2024 Tao Liu <ltao@redhat.com> - 2.0.27-10
+- mkdumprd: Fix makedumpfile parameter check.
 - Install the driver of physical device for a SR-IOV virtual device
 - Try to install PHY and MDIO bus drivers explicitly
 
-* Wed Jun 19 2024 Tao Liu <ltao@redhat.com> - 2.0.27-8.1
+* Wed May 08 2024 Tao Liu <ltao@redhat.com> - 2.0.27-9
-- mkdumprd: Fix makedumpfile parameter check.
+- kexec_file: add kexec_file flag to support debug printing
 
 * Tue Jan 30 2024 Tao Liu <ltao@redhat.com> - 2.0.27-8
 - dracut-module-setup: Skip initrd-cleanup and initrd-parse-etc in kdump