import kernel-rt-5.14.0-162.6.1.rt21.168.el9_1

.gitignore

@@ -0,0 +1,3 @@
+SOURCES/linux-5.14.0-162.6.1.rt21.168.el9_1.tar.xz
+SOURCES/rheldup3.x509
+SOURCES/rhelkpatch1.x509

.kernel-rt.metadata

@@ -0,0 +1,3 @@
+dae924c7eec821f698beb75b6c732688146e6c26 SOURCES/linux-5.14.0-162.6.1.rt21.168.el9_1.tar.xz
+95b9b811c7b0a6c98b2eafc4e7d6d24f2cb63289 SOURCES/rheldup3.x509
+d90885108d225a234a5a9d054fc80893a5bd54d0 SOURCES/rhelkpatch1.x509

SOURCES/Makefile.rhelver

@@ -0,0 +1,69 @@
+RHEL_MAJOR = 9
+RHEL_MINOR = 1
+
+#
+# RHEL_RELEASE
+# -------------
+#
+# Represents build number in 'release' part of RPM's name-version-release.
+#   name is <package_name>, e.g. kernel
+#   version is upstream kernel version this kernel is based on, e.g. 4.18.0
+#   release is <RHEL_RELEASE>.<dist_tag>[<buildid>], e.g. 100.el8
+#
+# Use this spot to avoid future merge conflicts.
+# Do not trim this comment.
+RHEL_RELEASE = 162.6.1
+
+#
+# ZSTREAM
+# -------
+#
+#  This variable controls whether we use zstream numbering or not for the
+#  package release. The zstream release keeps the build number of the last
+#  build done for ystream for the Beta milestone, and increments a second
+#  number for each build. The third number is used for branched builds
+#  (eg.: for builds with security fixes or hot fixes done outside of the
+#  batch release process).
+#
+#  For example, with ZSTREAM unset or set to "no", all builds will contain
+#  a release with only the build number, eg.: kernel-<kernel version>-X.el*,
+#  where X is the build number. With ZSTREAM set to "yes", we will have
+#  builds with kernel-<kernel version>-X.Y.Z.el*, where X is the last
+#  RHEL_RELEASE number before ZSTREAM flag was set to yes, Y will now be the
+#  build number and Z will always be 1 except if you're doing a branched build
+#  (when you give RHDISTGIT_BRANCH on the command line, in which case the Z
+#  number will be incremented instead of the Y).
+#
+ZSTREAM ?= yes
+
+#
+# Early y+1 numbering
+# --------------------
+#
+# In early y+1 process, RHEL_RELEASE consists of 2 numbers: x.y
+# First is RHEL_RELEASE inherited/merged from y as-is, second number
+# is incremented with each build starting from 1. After merge from y,
+# it resets back to 1. This way y+1 nvr reflects status of last merge.
+#
+# Example:
+#
+# rhel8.0                        rhel-8.1
+#   kernel-4.18.0-58.el8   -->     kernel-4.18.0-58.1.el8
+#                                  kernel-4.18.0-58.2.el8
+#   kernel-4.18.0-59.el8           kernel-4.18.0-59.1.el8
+#   kernel-4.18.0-60.el8
+#   kernel-4.18.0-61.el8   -->     kernel-4.18.0-61.1.el8
+#
+#
+# Use this spot to avoid future merge conflicts.
+# Do not trim this comment.
+EARLY_YSTREAM ?= no
+EARLY_YBUILD:=
+EARLY_YRELEASE:=
+ifneq ("$(ZSTREAM)", "yes")
+  ifeq ("$(EARLY_YSTREAM)","yes")
+    RHEL_RELEASE:=$(RHEL_RELEASE).$(EARLY_YRELEASE)
+  endif
+endif
+
+RTBUILD:=.168

SOURCES/README.rst

@@ -0,0 +1,25 @@
+===================
+The Kernel dist-git
+===================
+
+The kernel is maintained in a `source tree`_ rather than directly in dist-git.
+The specfile is maintained as a `template`_ in the source tree along with a set
+of build scripts to generate configurations, (S)RPMs, and to populate the
+dist-git repository.
+
+The `documentation`_ for the source tree covers how to contribute and maintain
+the tree.
+
+If you're looking for the downstream patch set it's available in the source
+tree with "git log master..ark-patches" or
+`online`_.
+
+Each release in dist-git is tagged in the source repository so you can easily
+check out the source tree for a build. The tags are in the format
+name-version-release, but note release doesn't contain the dist tag since the
+source can be built in different build roots (Fedora, CentOS, etc.)
+
+.. _source tree: https://gitlab.com/cki-project/kernel-ark.git
+.. _template: https://gitlab.com/cki-project/kernel-ark/-/blob/os-build/redhat/kernel.spec.template
+.. _documentation: https://gitlab.com/cki-project/kernel-ark/-/wikis/home
+.. _online: https://gitlab.com/cki-project/kernel-ark/-/commits/ark-patches

SOURCES/check-kabi

@@ -0,0 +1,166 @@
+#!/usr/bin/python3
+#
+# check-kabi - Red Hat kABI reference checking tool
+#
+# We use this script to check against reference Module.kabi files.
+#
+# Author: Jon Masters <jcm@redhat.com>
+# Copyright (C) 2007-2009 Red Hat, Inc.
+#
+# This software may be freely redistributed under the terms of the GNU
+# General Public License (GPL).
+
+# Changelog:
+#
+# 2018/06/01 - Update for python3 by Petr Oros.
+# 2009/08/15 - Updated for use in RHEL6.
+# 2007/06/13 - Initial rewrite in python by Jon Masters.
+
+__author__ = "Jon Masters <jcm@redhat.com>"
+__version__ = "2.0"
+__date__ = "2009/08/15"
+__copyright__ = "Copyright (C) 2007-2009 Red Hat, Inc"
+__license__ = "GPL"
+
+import getopt
+import string
+import sys
+
+true = 1
+false = 0
+
+
+def load_symvers(symvers, filename):
+    """Load a Module.symvers file."""
+
+    symvers_file = open(filename, "r")
+
+    while true:
+        in_line = symvers_file.readline()
+        if in_line == "":
+            break
+        if in_line == "\n":
+            continue
+        checksum, symbol, directory, type, *ns = in_line.split()
+        ns = ns[0] if ns else None
+
+        symvers[symbol] = in_line[0:-1]
+
+
+def load_kabi(kabi, filename):
+    """Load a Module.kabi file."""
+
+    kabi_file = open(filename, "r")
+
+    while true:
+        in_line = kabi_file.readline()
+        if in_line == "":
+            break
+        if in_line == "\n":
+            continue
+        checksum, symbol, directory, type, *ns = in_line.split()
+        ns = ns[0] if ns else None
+
+        kabi[symbol] = in_line[0:-1]
+
+
+def check_kabi(symvers, kabi):
+    """Check Module.kabi and Module.symvers files."""
+
+    fail = 0
+    warn = 0
+    changed_symbols = []
+    moved_symbols = []
+    ns_symbols = []
+
+    for symbol in kabi:
+        abi_hash, abi_sym, abi_dir, abi_type, *abi_ns = kabi[symbol].split()
+        abi_ns = abi_ns[0] if abi_ns else None
+        if symbol in symvers:
+            sym_hash, sym_sym, sym_dir, sym_type, *sym_ns = symvers[symbol].split()
+            sym_ns = sym_ns[0] if sym_ns else None
+            if abi_hash != sym_hash:
+                fail = 1
+                changed_symbols.append(symbol)
+
+            if abi_dir != sym_dir:
+                warn = 1
+                moved_symbols.append(symbol)
+
+            if abi_ns != sym_ns:
+                warn = 1
+                ns_symbols.append(symbol)
+        else:
+            fail = 1
+            changed_symbols.append(symbol)
+
+    if fail:
+        print("*** ERROR - ABI BREAKAGE WAS DETECTED ***")
+        print("")
+        print("The following symbols have been changed (this will cause an ABI breakage):")
+        print("")
+        for symbol in changed_symbols:
+            print(symbol)
+        print("")
+
+    if warn:
+        print("*** WARNING - ABI SYMBOLS MOVED ***")
+        if moved_symbols:
+            print("")
+            print("The following symbols moved (typically caused by moving a symbol from being")
+            print("provided by the kernel vmlinux out to a loadable module):")
+            print("")
+            for symbol in moved_symbols:
+                print(symbol)
+            print("")
+        if ns_symbols:
+            print("")
+            print("The following symbols changed symbol namespaces:")
+            print("")
+            for symbol in ns_symbols:
+                print(symbol)
+            print("")
+
+    """Halt the build, if we got errors and/or warnings. In either case,
+       double-checkig is required to avoid introducing / concealing
+       KABI inconsistencies."""
+    if fail or warn:
+        sys.exit(1)
+    sys.exit(0)
+
+
+def usage():
+    print("""
+check-kabi: check Module.kabi and Module.symvers files.
+
+    check-kabi [ -k Module.kabi ] [ -s Module.symvers ]
+
+""")
+
+
+if __name__ == "__main__":
+
+    symvers_file = ""
+    kabi_file = ""
+
+    opts, args = getopt.getopt(sys.argv[1:], 'hk:s:')
+
+    for o, v in opts:
+        if o == "-s":
+            symvers_file = v
+        if o == "-h":
+            usage()
+            sys.exit(0)
+        if o == "-k":
+            kabi_file = v
+
+    if (symvers_file == "") or (kabi_file == ""):
+        usage()
+        sys.exit(1)
+
+    symvers = {}
+    kabi = {}
+
+    load_symvers(symvers, symvers_file)
+    load_kabi(kabi, kabi_file)
+    check_kabi(symvers, kabi)

SOURCES/cpupower.config

@@ -0,0 +1,3 @@
+# See 'cpupower help' and cpupower(1) for more info
+CPUPOWER_START_OPTS="frequency-set -g performance"
+CPUPOWER_STOP_OPTS="frequency-set -g ondemand"

SOURCES/cpupower.service

@@ -0,0 +1,13 @@
+[Unit]
+Description=Configure CPU power related settings
+After=syslog.target
+
+[Service]
+Type=oneshot
+RemainAfterExit=yes
+EnvironmentFile=/etc/sysconfig/cpupower
+ExecStart=/usr/bin/cpupower $CPUPOWER_START_OPTS
+ExecStop=/usr/bin/cpupower $CPUPOWER_STOP_OPTS
+
+[Install]
+WantedBy=multi-user.target

SOURCES/filter-aarch64.sh.rhel

@@ -0,0 +1,18 @@
+#! /bin/bash
+
+# This is the aarch64 override file for the core/drivers package split.  The
+# module directories listed here and in the generic list in filter-modules.sh
+# will be moved to the resulting kernel-modules package for this arch.
+# Anything not listed in those files will be in the kernel-core package.
+#
+# Please review the default list in filter-modules.sh before making
+# modifications to the overrides below.  If something should be removed across
+# all arches, remove it in the default instead of per-arch.
+
+driverdirs="atm auxdisplay bcma bluetooth firewire fmc infiniband isdn leds media memstick message mmc mtd mwave nfc ntb pcmcia platform power ssb staging tty uio uwb w1"
+
+ethdrvs="3com adaptec arc alteon atheros broadcom cadence calxeda chelsio cisco dec dlink emulex icplus marvell micrel myricom neterion nvidia oki-semi packetengines qlogic rdc renesas sfc silan sis smsc stmicro sun tehuti ti via wiznet xircom"
+
+drmdrvs="amd arm bridge ast exynos hisilicon i2c imx mgag200 meson msm nouveau panel radeon rockchip tegra sun4i tinydrm vc4"
+
+singlemods="ntb_netdev iscsi_ibft iscsi_boot_sysfs megaraid pmcraid qedi qla1280 9pnet_rdma rpcrdma nvmet-rdma nvme-rdma hid-picolcd hid-prodikeys hwa-hc hwpoison-inject target_core_user sbp_target cxgbit iw_cxgb3 iw_cxgb4 cxgb3i cxgb3i cxgb3i_ddp cxgb4i chcr chtls"

SOURCES/filter-modules.sh.rhel

@@ -0,0 +1,177 @@
+#! /bin/bash
+#
+# Called as filter-modules.sh list-of-modules Arch
+
+# This script filters the modules into the kernel-core and kernel-modules
+# subpackages.  We list out subsystems/subdirs to prune from the installed
+# module directory.  What is left is put into the kernel-core package.  What is
+# pruned is contained in the kernel-modules package.
+#
+# This file contains the default subsys/subdirs to prune from all architectures.
+# If an architecture needs to differ, we source a per-arch filter-<arch>.sh file
+# that contains the set of override lists to be used instead.  If a module or
+# subsys should be in kernel-modules on all arches, please change the defaults
+# listed here.
+
+# Overrides is individual modules which need to remain in kernel-core due to deps.
+overrides="cec"
+
+# Set the default dirs/modules to filter out
+driverdirs="atm auxdisplay bcma bluetooth firewire fmc iio infiniband isdn leds media memstick mfd mmc mtd nfc ntb pcmcia platform power ssb staging tty uio uwb w1"
+
+chardrvs="mwave pcmcia"
+
+netdrvs="appletalk can dsa hamradio ieee802154 irda ppp slip usb wireless"
+
+ethdrvs="3com adaptec alteon amd aquantia atheros broadcom cadence calxeda chelsio cisco dec dlink emulex icplus marvell neterion nvidia oki-semi packetengines qlogic rdc renesas sfc silan sis smsc stmicro sun tehuti ti wiznet xircom"
+
+cryptdrvs="bcm caam cavium chelsio hisilicon marvell qat"
+
+inputdrvs="gameport tablet touchscreen"
+
+scsidrvs="aacraid aic7xxx aic94xx be2iscsi bfa bnx2i bnx2fc csiostor cxgbi esas2r fcoe fnic hisi_sas isci libsas lpfc megaraid mpt2sas mpt3sas mvsas pm8001 qla2xxx qla4xxx sym53c8xx_2 ufs qedf"
+
+usbdrvs="atm image misc serial wusbcore"
+
+fsdrvs="affs befs cifs coda cramfs ecryptfs hfs hfsplus jfs minix ncpfs nilfs2 ocfs2 reiserfs romfs squashfs sysv ubifs ufs"
+
+netprots="6lowpan appletalk atm ax25 batman-adv bluetooth can dccp dsa ieee802154 irda l2tp mac80211 mac802154 mpls netrom nfc rds rfkill rose sctp smc wireless"
+
+drmdrvs="amd ast gma500 i2c i915 mgag200 nouveau radeon via "
+
+singlemods="ntb_netdev iscsi_ibft iscsi_boot_sysfs megaraid pmcraid qedi qla1280 9pnet_rdma rpcrdma nvmet-rdma nvme-rdma hid-picolcd hid-prodikeys hwa-hc hwpoison-inject hid-sensor-hub target_core_user sbp_target cxgbit iw_cxgb3 iw_cxgb4 cxgb3i cxgb3i cxgb3i_ddp cxgb4i chcr chtls parport_serial ism regmap-sdw regmap-sdw-mbq arizona-micsupp hid-asus"
+
+# Grab the arch-specific filter list overrides
+source ./filter-$2.sh
+
+filter_dir() {
+	filelist=$1
+	dir=$2
+
+	grep -v -e "${dir}/" ${filelist} > ${filelist}.tmp
+
+	if [ $? -ne 0 ]
+	then
+		echo "Couldn't remove ${dir}.  Skipping."
+	else
+		grep -e "${dir}/" ${filelist} >> k-d.list
+		mv ${filelist}.tmp $filelist
+	fi
+	
+	return 0
+}
+
+filter_ko() {
+	filelist=$1
+	mod=$2
+
+	grep -v -e "${mod}.ko" ${filelist} > ${filelist}.tmp
+
+	if [ $? -ne 0 ]
+	then
+		echo "Couldn't remove ${mod}.ko  Skipping."
+	else
+		grep -e "${mod}.ko" ${filelist} >> k-d.list
+		mv ${filelist}.tmp $filelist
+	fi
+	
+	return 0
+}
+
+# Filter the drivers/ subsystems
+for subsys in ${driverdirs}
+do
+	filter_dir $1 drivers/${subsys}
+done
+
+# Filter the networking drivers
+for netdrv in ${netdrvs}
+do
+	filter_dir $1 drivers/net/${netdrv}
+done
+
+# Filter the char drivers
+for char in ${chardrvs}
+do
+	filter_dir $1 drivers/char/${char}
+done
+
+# Filter the ethernet drivers
+for eth in ${ethdrvs}
+do
+	filter_dir $1 drivers/net/ethernet/${eth}
+done
+
+# Filter the crypto drivers
+for crypt in ${cryptdrvs}
+do
+	filter_dir $1 drivers/crypto/${crypt}
+done
+
+# SCSI
+for scsi in ${scsidrvs}
+do
+	filter_dir $1 drivers/scsi/${scsi}
+done
+
+# Input
+for input in ${inputdrvs}
+do
+	filter_dir $1 drivers/input/${input}
+done
+
+# USB
+for usb in ${usbdrvs}
+do
+	filter_dir $1 drivers/usb/${usb}
+done
+
+# Filesystems
+for fs in ${fsdrvs}
+do
+	filter_dir $1 fs/${fs}
+done
+
+# Network protocols
+for prot in ${netprots}
+do
+	filter_dir $1 kernel/net/${prot}
+done
+
+# DRM
+for drm in ${drmdrvs}
+do
+	filter_dir $1 drivers/gpu/drm/${drm}
+done
+
+# Just kill sound.
+filter_dir $1 kernel/sound
+filter_dir $1 kernel/drivers/soundwire
+
+# Now go through and filter any single .ko files that might have deps on the
+# things we filtered above
+for mod in ${singlemods}
+do
+        filter_ko $1 ${mod}
+done
+
+# Now process the override list to bring those modules back into core
+for mod in ${overrides}
+do
+	grep -v -e "/${mod}.ko" k-d.list > k-d.list.tmp
+	if [ $? -ne 0 ]
+        then
+                echo "Couldn't save ${mod}.ko  Skipping."
+        else
+                grep -e "/${mod}.ko" k-d.list >> $filelist
+                mv k-d.list.tmp k-d.list
+        fi
+
+done
+
+# Go through our generated drivers list and remove the .ko files.  We'll
+# restore them later.
+for mod in `cat k-d.list`
+do
+	rm -rf $mod
+done

SOURCES/filter-ppc64le.sh.rhel

@@ -0,0 +1,14 @@
+#! /bin/bash
+
+# This is the ppc64le override file for the core/drivers package split.  The
+# module directories listed here and in the generic list in filter-modules.sh
+# will be moved to the resulting kernel-modules package for this arch.
+# Anything not listed in those files will be in the kernel-core package.
+#
+# Please review the default list in filter-modules.sh before making
+# modifications to the overrides below.  If something should be removed across
+# all arches, remove it in the default instead of per-arch.
+
+driverdirs="atm auxdisplay bcma bluetooth firewire fmc infiniband isdn leds media memstick message mmc mtd mwave nfc ntb pcmcia platform power ssb staging tty uio uwb w1"
+
+singlemods="ntb_netdev iscsi_ibft iscsi_boot_sysfs megaraid pmcraid qedi qla1280 9pnet_rdma rpcrdma nvmet-rdma nvme-rdma hid-picolcd hid-prodikeys hwa-hc hwpoison-inject target_core_user sbp_target cxgbit iw_cxgb3 iw_cxgb4 cxgb3i cxgb3i cxgb3i_ddp cxgb4i chcr chtls"

SOURCES/filter-s390x.sh.rhel

@@ -0,0 +1,12 @@
+#! /bin/bash
+
+# This is the s390x override file for the core/drivers package split.  The
+# module directories listed here and in the generic list in filter-modules.sh
+# will be moved to the resulting kernel-modules package for this arch.
+# Anything not listed in those files will be in the kernel-core package.
+#
+# Please review the default list in filter-modules.sh before making
+# modifications to the overrides below.  If something should be removed across
+# all arches, remove it in the default instead of per-arch.
+
+# Defaults work so no need to override

SOURCES/filter-x86_64.sh.rhel

@@ -0,0 +1,12 @@
+#! /bin/bash
+
+# This is the x86_64 override file for the core/drivers package split.  The
+# module directories listed here and in the generic list in filter-modules.sh
+# will be moved to the resulting kernel-modules package for this arch.
+# Anything not listed in those files will be in the kernel-core package.
+#
+# Please review the default list in filter-modules.sh before making
+# modifications to the overrides below.  If something should be removed across
+# all arches, remove it in the default instead of per-arch.
+
+# Defaults work so no need to override

SOURCES/gating.yaml

@@ -0,0 +1,6 @@
+--- !Policy
+product_versions:
+  - rhel-9
+decision_context: osci_compose_gate
+rules:
+  - !PassingTestCaseRule {test_case_name: cki.tier1-x86_64.functional}

SOURCES/generate_all_configs.sh

@@ -0,0 +1,40 @@
+#!/bin/sh
+
+# Adjusts the configuration options to build the variants correctly
+#
+# arg1: configuration to go in the primary variant
+# arg2: are we only generating debug configs
+
+
+PRIMARY=$1
+DEBUGBUILDSENABLED=$2
+
+if [ -z "$2" ]; then
+	exit 1
+fi
+
+if [ -z "$PRIMARY" ]; then
+	PRIMARY=rhel
+fi
+
+if [ "$PRIMARY" = "fedora" ]; then
+	SECONDARY=rhel
+else
+	SECONDARY=fedora
+fi
+
+for i in kernel-rt-*-"$PRIMARY".config; do
+	NEW=kernel-rt-"$VERSION"-$(echo "$i" | cut -d - -f3- | sed s/-"$PRIMARY"//)
+	#echo $NEW
+	mv "$i" "$NEW"
+done
+
+rm -f kernel-rt-*-"$SECONDARY".config
+
+if [ "$DEBUGBUILDSENABLED" -eq 0 ]; then
+	for i in kernel-rt-*debug*.config; do
+		base=$(echo "$i" | sed -r s/-?debug//g)
+		NEW=kernel-rt-$(echo "$base" | cut -d - -f3-)
+		mv "$i" "$NEW"
+	done
+fi

SOURCES/kernel-local

@@ -0,0 +1,2 @@
+# This file is intentionally left empty in the stock kernel. Its a nicety
+# added for those wanting to do custom rebuilds with altered config opts.

SOURCES/kvm_stat.logrotate

@@ -0,0 +1,11 @@
+/var/log/kvm_stat.csv {
+	size 10M
+	missingok
+	compress
+	maxage 30
+	rotate 5
+	nodateext
+	postrotate
+		/usr/bin/systemctl try-restart kvm_stat.service
+	endscript
+}

SOURCES/merge.pl

@@ -0,0 +1,72 @@
+#! /usr/bin/perl
+
+my @args=@ARGV;
+my %configvalues;
+my @configoptions;
+my $configcounter = 0;
+
+# optionally print out the architecture as the first line of our output
+my $arch = $args[2];
+if (defined $arch) {
+	print "# $arch\n";
+}
+
+# first, read the override file
+
+open (FILE,"$args[0]") || die "Could not open $args[0]";
+while (<FILE>) {
+	my $str = $_;
+	my $configname;
+
+	if (/\# ([\w]+) is not set/) {
+		$configname = $1;
+	} elsif (/^\#/) {
+		# fall through on comments like 'avoid CONFIG_FOO=y'
+		;
+	} elsif (/([\w]+)=/) {
+		$configname = $1;
+	}
+
+	if (defined($configname) && !exists($configvalues{$configname})) {
+		$configvalues{$configname} = $str;
+		$configoptions[$configcounter] = $configname;
+		$configcounter ++;
+	}
+};
+
+# now, read and output the entire configfile, except for the overridden
+# parts... for those the new value is printed.
+
+open (FILE2,"$args[1]") || die "Could not open $args[1]";
+while (<FILE2>) {
+	my $configname;
+
+	if (/\# ([\w]+) is not set/) {
+		$configname = $1;
+	} elsif (/^\#/) {
+		# fall through on comments like 'avoid CONFIG_FOO=y'
+		;
+	} elsif (/([\w]+)=/) {
+		$configname  = $1;
+	}
+
+	if (defined($configname) && exists($configvalues{$configname})) {
+		print "$configvalues{$configname}";
+		delete($configvalues{$configname});
+	} else {
+		print "$_";
+	}
+}
+
+# now print the new values from the overridden configfile
+my $counter = 0;
+
+while ($counter < $configcounter) {
+	my $configname = $configoptions[$counter];
+	if (exists($configvalues{$configname})) {
+		print "$configvalues{$configname}";
+	}
+	$counter++;
+}
+
+1;

SOURCES/mod-denylist.sh

@@ -0,0 +1,164 @@
+#! /bin/bash
+# shellcheck disable=SC2164
+
+RpmDir=$1
+ModDir=$2
+Dir="$1/$2"
+# Note the list filename must have the format mod-[PACKAGE].list, for example,
+# mod-internal.list or mod-extra.list.  The PACKAGE is used to create a
+# override directory for the modules.
+List=$3
+Dest="$4"
+
+blacklist()
+{
+	cat > "$RpmDir/etc/modprobe.d/$1-blacklist.conf" <<-__EOF__
+	# This kernel module can be automatically loaded by non-root users. To
+	# enhance system security, the module is blacklisted by default to ensure
+	# system administrators make the module available for use as needed.
+	# See https://access.redhat.com/articles/3760101 for more details.
+	#
+	# Remove the blacklist by adding a comment # at the start of the line.
+	blacklist $1
+__EOF__
+}
+
+check_blacklist()
+{
+	mod=$(find "$RpmDir/$ModDir" -name "$1")
+	[ ! "$mod" ] && return 0
+	if modinfo "$mod" | grep -q '^alias:\s\+net-'; then
+		mod="${1##*/}"
+		mod="${mod%.ko*}"
+		echo "$mod has an alias that allows auto-loading. Blacklisting."
+		blacklist "$mod"
+	fi
+}
+
+find_depends()
+{
+	dep=$1
+	depends=$(modinfo "$dep" | sed -n -e "/^depends/ s/^depends:[ \t]*//p")
+	[ -z "$depends" ] && exit
+	for mod in ${depends//,/ }
+	do
+		match=$(grep "^$mod.ko" "$ListName")
+		[ -z "$match" ] && continue
+		# check if the module we are looking at is in mod-* too.
+		# if so we do not need to mark the dep as required.
+		mod2=${dep##*/}  # same as $(basename $dep), but faster
+		match2=$(grep "^$mod2" "$ListName")
+		if [ -n "$match2" ]
+		then
+			#echo $mod2 >> notreq.list
+			continue
+		fi
+		echo "$mod".ko >> req.list
+	done
+}
+
+foreachp()
+{
+	P=$(nproc)
+	bgcount=0
+	while read -r mod; do
+		$1 "$mod" &
+
+		bgcount=$((bgcount + 1))
+		if [ $bgcount -eq "$P" ]; then
+			wait -n
+			bgcount=$((bgcount - 1))
+		fi
+	done
+
+	wait
+}
+
+# Destination was specified on the command line
+test -n "$4" && echo "$0: Override Destination $Dest has been specified."
+
+pushd "$Dir"
+
+OverrideDir=$(basename "$List")
+OverrideDir=${OverrideDir%.*}
+OverrideDir=${OverrideDir#*-}
+mkdir -p "$OverrideDir"
+
+rm -rf modnames
+find . -name "*.ko" -type f > modnames
+# Look through all of the modules, and throw any that have a dependency in
+# our list into the list as well.
+rm -rf dep.list dep2.list
+rm -rf req.list req2.list
+touch dep.list req.list
+cp "$List" .
+
+# This variable needs to be exported because it is used in sub-script
+# executed by xargs
+ListName=$(basename "$List")
+export ListName
+
+foreachp find_depends < modnames
+
+sort -u req.list > req2.list
+sort -u "$ListName" > modules2.list
+join -v 1 modules2.list req2.list > modules3.list
+
+while IFS= read -r mod
+do
+    # get the path for the module
+    modpath=$(grep /"$mod" modnames)
+    [ -z "$modpath" ] && continue
+    echo "$modpath" >> dep.list
+done < modules3.list
+
+sort -u dep.list > dep2.list
+
+if [ -n "$Dest" ]; then
+    # now move the modules into the $Dest directory
+    while IFS= read -r mod
+    do
+	newpath=$(dirname "$mod" | sed -e "s/kernel\\//$Dest\//")
+	mkdir -p "$newpath"
+	mv "$mod" "$newpath"
+	echo "$mod" | sed -e "s/kernel\\//$Dest\//" | sed -e "s|^.|${ModDir}|g" >> "$RpmDir"/"$ListName"
+    done < dep2.list
+fi
+
+popd
+
+# If we're signing modules, we can't leave the .mod files for the .ko files
+# we've moved in .tmp_versions/.  Remove them so the Kbuild 'modules_sign'
+# target doesn't try to sign a non-existent file.  This is kinda ugly, but
+# so are the modules-* packages.
+
+while IFS= read -r mod
+do
+  modfile=$(basename "$mod" | sed -e 's/.ko/.mod/')
+  rm .tmp_versions/"$modfile"
+done < "$Dir"/dep2.list
+
+if [ -z "$Dest" ]; then
+	sed -e "s|^.|${ModDir}|g" "$Dir"/dep2.list > "$RpmDir/$ListName"
+	echo "./$RpmDir/$ListName created."
+	[ -d "$RpmDir/etc/modprobe.d/" ] || mkdir -p "$RpmDir/etc/modprobe.d/"
+	foreachp check_blacklist < "$List"
+fi
+
+# Many BIOS-es export a PNP-id which causes the floppy driver to autoload
+# even though most modern systems don't have a 3.5" floppy driver anymore
+# this replaces the old die_floppy_die.patch which removed the PNP-id from
+# the module
+
+floppylist=("$RpmDir"/"$ModDir"/kernel/drivers/block/floppy.ko*)
+if [[ -n ${floppylist[0]} && -f ${floppylist[0]} ]]; then
+     blacklist "floppy"
+fi
+
+# avoid an empty kernel-extra package
+echo "$ModDir/$OverrideDir" >> "$RpmDir/$ListName"
+
+pushd "$Dir"
+rm modnames dep.list dep2.list req.list req2.list
+rm "$ListName" modules2.list modules3.list
+popd

SOURCES/mod-extra.list.rhel

@@ -0,0 +1,192 @@
+6pack.ko
+a3d.ko
+act200l-sir.ko
+actisys-sir.ko
+adi.ko
+aer_inject.ko
+af_802154.ko
+affs.ko
+ali-ircc.ko
+analog.ko
+appletalk.ko
+atm.ko
+avma1_cs.ko
+avm_cs.ko
+avmfritz.ko
+ax25.ko
+b1.ko
+bas_gigaset.ko
+batman-adv.ko
+baycom_par.ko
+baycom_ser_fdx.ko
+baycom_ser_hdx.ko
+befs.ko
+bpqether.ko
+br2684.ko
+capi.ko
+c_can.ko
+c_can_platform.ko
+clip.ko
+cobra.ko
+coda.ko
+cuse.ko
+db9.ko
+dccp_diag.ko
+dccp_ipv4.ko
+dccp_ipv6.ko
+dccp.ko
+dccp_probe.ko
+diva_idi.ko
+divas.ko
+ds1wm.ko
+ds2482.ko
+ds2490.ko
+dss1_divert.ko
+elsa_cs.ko
+ems_pci.ko
+ems_usb.ko
+esd_usb2.ko
+esi-sir.ko
+gamecon.ko
+gf2k.ko
+gigaset.ko
+girbil-sir.ko
+grip.ko
+grip_mp.ko
+guillemot.ko
+hdlcdrv.ko
+hfc4s8s_l1.ko
+hfcmulti.ko
+hfcpci.ko
+hisax.ko
+hwa-rc.ko
+hysdn.ko
+i2400m.ko
+i2400m-sdio.ko
+i2400m-usb.ko
+ieee802154.ko
+iforce.ko
+interact.ko
+ipddp.ko
+ipx.ko
+isdn.ko
+joydump.ko
+kingsun-sir.ko
+ks959-sir.ko
+ksdazzle-sir.ko
+kvaser_pci.ko
+l2tp_core.ko
+l2tp_debugfs.ko
+l2tp_eth.ko
+l2tp_ip.ko
+l2tp_ip6.ko
+l2tp_netlink.ko
+l2tp_ppp.ko
+lec.ko
+ma600-sir.ko
+magellan.ko
+mcp2120-sir.ko
+mISDN_core.ko
+mISDN_dsp.ko
+mkiss.ko
+mptbase.ko
+mptctl.ko
+mptfc.ko
+nci.ko
+ncpfs.ko
+netjet.ko
+netrom.ko
+nfc.ko
+nilfs2.ko
+ocfs2_dlmfs.ko
+ocfs2_dlm.ko
+ocfs2.ko
+ocfs2_nodemanager.ko
+ocfs2_stackglue.ko
+ocfs2_stack_o2cb.ko
+ocfs2_stack_user.ko
+old_belkin-sir.ko
+orinoco_cs.ko
+orinoco.ko
+orinoco_nortel.ko
+orinoco_pci.ko
+orinoco_plx.ko
+orinoco_usb.ko
+plx_pci.ko
+pn_pep.ko
+pppoatm.ko
+rds.ko
+rds_rdma.ko
+rds_tcp.ko
+rose.ko
+sch_atm.ko
+sch_cbq.ko
+sch_choke.ko
+sch_drr.ko
+sch_dsmark.ko
+sch_gred.ko
+sch_mqprio.ko
+sch_multiq.ko
+sch_netem.ko
+sch_qfq.ko
+sch_red.ko
+sch_sfb.ko
+sch_teql.ko
+sctp.ko
+sctp_diag.ko
+sctp_probe.ko
+sidewinder.ko
+sja1000.ko
+sja1000_platform.ko
+slcan.ko
+slip.ko
+softing_cs.ko
+softing.ko
+spaceball.ko
+spaceorb.ko
+stinger.ko
+sysv.ko
+tcp_bic.ko
+tcp_highspeed.ko
+tcp_htcp.ko
+tcp_hybla.ko
+tcp_illinois.ko
+tcp_lp.ko
+tcp_scalable.ko
+tcp_vegas.ko
+tcp_veno.ko
+tcp_westwood.ko
+tcp_yeah.ko
+tekram-sir.ko
+tmdc.ko
+toim3232-sir.ko
+trancevibrator.ko
+turbografx.ko
+twidjoy.ko
+ubifs.ko
+ufs.ko
+umc.ko
+usbip-core.ko
+usbip-host.ko
+uwb.ko
+vcan.ko
+vhci-hcd.ko
+w1_bq27000.ko
+w1_ds2408.ko
+w1_ds2423.ko
+w1_ds2431.ko
+w1_ds2433.ko
+w1_ds2760.ko
+w1_ds2780.ko
+w1_ds2781.ko
+w1_ds28e04.ko
+w1_smem.ko
+w1_therm.ko
+w6692.ko
+walkera0701.ko
+wanrouter.ko
+warrior.ko
+whci.ko
+wire.ko
+yam.ko
+zhenhua.ko

SOURCES/mod-internal.list

@@ -0,0 +1,49 @@
+dmatest
+kunit
+kunit-test
+ext4-inode-test
+list-test
+sysctl-test
+mptcp_crypto_test
+mptcp_token_test
+bitfield_kunit
+cmdline_kunit
+property-entry-test
+qos-test
+resource_kunit
+soc-topology-test
+string-stream-test
+test_linear_ranges
+test_bits
+test_kasan
+time_test
+fat_test
+lib_test
+rational-test
+test_list_sort
+slub_kunit
+memcpy_kunit
+locktorture
+mac80211_hwsim
+netdevsim
+pktgen
+rcutorture
+rocker
+scftorture
+test_bpf
+test_klp_atomic_replace
+test_klp_callbacks_demo
+test_klp_callbacks_demo2
+test_klp_callbacks_busy
+test_klp_callbacks_mod
+test_klp_livepatch
+test_klp_shadow_vars
+test_klp_state
+test_klp_state2
+test_klp_state3
+torture
+refscale
+rcuscale
+test_vmalloc
+test_hmm
+mtty

SOURCES/mod-kvm.list

@@ -0,0 +1,5 @@
+kvm-amd
+kvm-intel
+kvm
+kvmgt
+ptp_kvm

SOURCES/mod-sign.sh

@@ -0,0 +1,37 @@
+#! /bin/bash
+
+# The modules_sign target checks for corresponding .o files for every .ko that
+# is signed. This doesn't work for package builds which re-use the same build
+# directory for every variant, and the .config may change between variants.
+# So instead of using this script to just sign lib/modules/$KernelVer/extra,
+# sign all .ko in the buildroot.
+
+# This essentially duplicates the 'modules_sign' Kbuild target and runs the
+# same commands for those modules.
+
+MODSECKEY=$1
+MODPUBKEY=$2
+moddir=$3
+
+modules=$(find "$moddir" -type f -name '*.ko')
+
+NPROC=$(nproc)
+[ -z "$NPROC" ] && NPROC=1
+
+# NB: this loop runs 2000+ iterations. Try to be fast.
+echo "$modules" | xargs -r -n16 -P $NPROC sh -c "
+for mod; do
+    ./scripts/sign-file sha256 $MODSECKEY $MODPUBKEY \$mod
+    rm -f \$mod.sig \$mod.dig
+done
+" DUMMYARG0   # xargs appends ARG1 ARG2..., which go into $mod in for loop.
+
+RANDOMMOD=$(echo "$modules" | sort -R | head -n 1)
+if [ "~Module signature appended~" != "$(tail -c 28 "$RANDOMMOD")" ]; then
+    echo "*****************************"
+    echo "*** Modules are unsigned! ***"
+    echo "*****************************"
+    exit 1
+fi
+
+exit 0

SOURCES/parallel_xz.sh

@@ -0,0 +1,26 @@
+#!/bin/sh
+# Reads filenames on stdin, xz-compresses each in place.
+# Not optimal for "compress relatively few, large files" scenario!
+
+# How many xz's to run in parallel:
+procgroup=""
+while test "$#" != 0; do
+	# Get it from -jNUM
+	N="${1#-j}"
+	if test "$N" = "$1"; then
+		# Not -j<something> - warn and ignore
+		echo "parallel_xz: warning: unrecognized argument: '$1'"
+	else
+		procgroup="$N"
+	fi
+	shift
+done
+
+# If told to use only one cpu:
+test "$procgroup" || exec xargs -r xz
+test "$procgroup" = 1 && exec xargs -r xz
+
+# xz has some startup cost. If files are really small,
+# this cost might be significant. To combat this,
+# process several files (in sequence) by each xz process via -n 16:
+exec xargs -r -n 16 -P "$procgroup" xz

SOURCES/partial-kgcov-snip.config

@@ -0,0 +1,5 @@
+# kgcov
+CONFIG_GCOV_KERNEL=y
+CONFIG_GCOV_PROFILE_ALL=y
+# CONFIG_GCOV_PROFILE_FTRACE is not set
+# CONFIG_OPEN_DICE is not set

SOURCES/process_configs.sh

@@ -0,0 +1,408 @@
+#!/bin/bash
+#
+# This script takes the merged config files and processes them through oldconfig
+# and listnewconfig
+#
+# Globally disable suggestion of appending '|| exit' or '|| return' to cd/pushd/popd commands
+# shellcheck disable=SC2164
+
+usage()
+{
+	# alphabetical order please
+	echo "process_configs.sh [ options ] package_name kernel_version"
+	echo "     -a: report all errors, equivalent to [-c -n -w -i]"
+	echo "     -c: error on mismatched config options"
+	echo "     -i: continue on error"
+	echo "     -n: error on unset config options"
+	echo "     -t: test run, do not overwrite original config"
+	echo "     -w: error on misconfigured config options"
+	echo "     -z: commit new configs to pending directory"
+	echo ""
+	echo "     A special CONFIG file tag, process_configs_known_broken can be added as a"
+	echo "     comment to any CONFIG file.  This tag indicates that there is no way to "
+	echo "     fix a CONFIG's entry.  This tag should only be used in extreme cases"
+	echo "     and is not to be used as a workaround to solve CONFIG problems."
+	exit 1
+}
+
+die()
+{
+	echo "$1"
+	exit 1
+}
+
+get_cross_compile()
+{
+	arch=$1
+	if [[ "$CC_IS_CLANG" -eq 1 ]]; then
+		echo "$arch"
+	else
+		echo "scripts/dummy-tools/"
+	fi
+}
+
+# stupid function to find top of tree to do kernel make configs
+switch_to_toplevel()
+{
+	path="$(pwd)"
+	while test -n "$path"
+	do
+		test -e "$path"/MAINTAINERS && \
+			test -d "$path"/drivers && \
+			break
+
+		path=$(dirname "$path")
+	done
+
+	test -n "$path"  || die "Can't find toplevel"
+	echo "$path"
+}
+
+checkoptions()
+{
+	count=$3
+	variant=$4
+
+	/usr/bin/awk '
+
+		/is not set/ {
+			split ($0, a, "#");
+			split(a[2], b);
+			if (NR==FNR) {
+				configs[b[1]]="is not set";
+			} else {
+				if (configs[b[1]] != "" && configs[b[1]] != "is not set")
+					 print "Found # "b[1] " is not set, after generation, had " b[1] " " configs[b[1]] " in Source tree";
+			}
+		}
+
+		/=/     {
+			split ($0, a, "=");
+			if (NR==FNR) {
+				configs[a[1]]=a[2];
+			} else {
+				if (configs[a[1]] != "" && configs[a[1]] != a[2])
+					 print "Found "a[1]"="a[2]" after generation, had " a[1]"="configs[a[1]]" in Source tree";
+			}
+		}
+	' "$1" "$2" > .mismatches${count}
+
+	checkoptions_error=false
+	if test -s .mismatches${count}
+	then
+		while read -r LINE
+		do
+			if find "${REDHAT}"/configs -name "$(echo "$LINE" | awk -F "=" ' { print $1 } ' | awk ' { print $2 }')" -print0 | xargs -0 grep ^ | grep -q "process_configs_known_broken"; then
+				# This is a known broken config.
+				# See script help warning.
+				checkoptions_error=false
+			else
+				checkoptions_error=true
+				break
+			fi
+		done < .mismatches${count}
+
+		! $checkoptions_error && return
+
+		sed -i "1s/^/Error: Mismatches found in configuration files for ${arch} ${variant}\n/" .mismatches${count}
+	else
+		rm -f .mismatches${count}
+	fi
+}
+
+parsenewconfigs()
+{
+	tmpdir=$(mktemp -d)
+
+	# This awk script reads the output of make listnewconfig
+	# and puts it into CONFIG_FOO files. Using the output of
+	# listnewconfig is much easier to ensure we get the default
+	# output.
+        /usr/bin/awk -v BASE="$tmpdir" '
+                /is not set/ {
+                        split ($0, a, "#");
+                        split(a[2], b);
+                        OUT_FILE=BASE"/"b[1];
+                        print $0 >> OUT_FILE;
+                }
+
+                /=/     {
+                        split ($0, a, "=");
+                        OUT_FILE=BASE"/"a[1];
+                        if (a[2] == "n")
+                                print "# " a[1] " is not set" >> OUT_FILE;
+                        else
+                                print $0 >> OUT_FILE;
+                }
+
+        ' .newoptions
+
+	# This awk script parses the output of helpnewconfig.
+	# Each option is separated between ----- markers
+	# The goal is to put all the help text as a comment in
+	# each CONFIG_FOO file. Because of how awk works
+	# there's a lot of moving files around and catting to
+	# get what we need.
+        /usr/bin/awk -v BASE="$tmpdir" '
+                BEGIN { inpatch=0;
+			outfile="none";
+                        symbol="none"; }
+                /^Symbol: .*$/ {
+                        split($0, a, " ");
+                        symbol="CONFIG_"a[2];
+                        outfile=BASE "/fake_"symbol
+                }
+                /-----/ {
+			if (inpatch == 0) {
+				inpatch = 1;
+			}
+                        else {
+                                if (symbol != "none") {
+                                    system("cat " outfile " " BASE "/" symbol " > " BASE "/tmpf");
+                                    system("mv " BASE "/tmpf " BASE "/" symbol);
+                                    symbol="none"
+				}
+                                outfile="none"
+				inpatch = 0;
+                        }
+                }
+                !/-----/ {
+                        if (inpatch == 1 && outfile != "none") {
+                                print "# "$0 >> outfile;
+                        }
+                }
+
+
+        ' .helpnewconfig
+
+	pushd "$tmpdir" &> /dev/null
+	rm fake_*
+	popd &> /dev/null
+	for f in "$tmpdir"/*; do
+		[[ -e "$f" ]] || break
+		cp "$f" "$SCRIPT_DIR/pending$FLAVOR/generic/"
+	done
+
+	rm -rf "$tmpdir"
+}
+
+function commit_new_configs()
+{
+	# assume we are in $source_tree/configs, need to get to top level
+	pushd "$(switch_to_toplevel)" &>/dev/null
+
+	for cfg in "$SCRIPT_DIR/${PACKAGE_NAME}${KVERREL}${SUBARCH}"*.config
+	do
+		arch=$(head -1 "$cfg" | cut -b 3-)
+		cfgtmp="${cfg}.tmp"
+		cfgorig="${cfg}.orig"
+		cat "$cfg" > "$cfgorig"
+
+		if [ "$arch" = "EMPTY" ]
+		then
+			# This arch is intentionally left blank
+			continue
+		fi
+		echo -n "Checking for new configs in $cfg ... "
+
+		make ${MAKEOPTS} ARCH="$arch" CROSS_COMPILE=$(get_cross_compile $arch) KCONFIG_CONFIG="$cfgorig" listnewconfig >& .listnewconfig
+		grep -E 'CONFIG_' .listnewconfig > .newoptions
+		if test -s .newoptions
+		then
+			make ${MAKEOPTS} ARCH="$arch" CROSS_COMPILE=$(get_cross_compile $arch) KCONFIG_CONFIG="$cfgorig" helpnewconfig >& .helpnewconfig
+			parsenewconfigs
+		fi
+		rm .newoptions
+		echo "done"
+	done
+
+	git add "$SCRIPT_DIR/pending$FLAVOR"
+	git commit -m "[redhat] AUTOMATIC: New configs"
+}
+
+function process_config()
+{
+	local cfg
+	local arch
+	local cfgtmp
+	local cfgorig
+	local count
+	local variant
+
+	cfg=$1
+	count=$2
+
+	arch=$(head -1 "$cfg" | cut -b 3-)
+
+	if [ "$arch" = "EMPTY" ]
+	then
+		# This arch is intentionally left blank
+		return
+	fi
+
+	variant=$(basename "$cfg" | cut -d"-" -f3- | cut -d"." -f1)
+
+	cfgtmp="${cfg}.tmp"
+	cfgorig="${cfg}.orig"
+	cat "$cfg" > "$cfgorig"
+
+	echo "Processing $cfg ... "
+
+	make ${MAKEOPTS} ARCH="$arch" CROSS_COMPILE=$(get_cross_compile $arch) KCONFIG_CONFIG="$cfgorig" listnewconfig >& .listnewconfig${count}
+	grep -E 'CONFIG_' .listnewconfig${count} > .newoptions${count}
+	if test -n "$NEWOPTIONS" && test -s .newoptions${count}
+	then
+		echo "Found unset config items in ${arch} ${variant}, please set them to an appropriate value" >> .errors${count}
+		cat .newoptions${count} >> .errors${count}
+		rm .newoptions${count}
+		RETURNCODE=1
+	fi
+	rm .newoptions${count}
+
+	grep -E 'config.*warning' .listnewconfig${count} > .warnings${count}
+	if test -n "$CHECKWARNINGS" && test -s .warnings${count}
+	then
+		echo "Found misconfigured config items in ${arch} ${variant}, please set them to an appropriate value" >> .errors${count}
+		cat .warnings${count} >> .errors${count}
+		rm .warnings${count}
+	fi
+	rm .warnings${count}
+
+	rm .listnewconfig${count}
+
+	make ${MAKEOPTS} ARCH="$arch" CROSS_COMPILE=$(get_cross_compile $arch) KCONFIG_CONFIG="$cfgorig" olddefconfig > /dev/null || exit 1
+	echo "# $arch" > "$cfgtmp"
+	cat "$cfgorig" >> "$cfgtmp"
+	if test -n "$CHECKOPTIONS"
+	then
+		checkoptions "$cfg" "$cfgtmp" "$count" "$variant"
+	fi
+	# if test run, don't overwrite original
+	if test -n "$TESTRUN"
+	then
+		rm -f "$cfgtmp"
+	else
+		mv "$cfgtmp" "$cfg"
+	fi
+	rm -f "$cfgorig"
+	echo "Processing $cfg complete"
+}
+
+function process_configs()
+{
+	# assume we are in $source_tree/configs, need to get to top level
+	pushd "$(switch_to_toplevel)" &>/dev/null
+
+	# The next line is throwaway code for transition to parallel
+	# processing.  Leaving this line in place is harmless, but it can be
+	# removed the next time anyone updates this function.
+	[ -f .mismatches ] && rm -f .mismatches
+
+	count=0
+	for cfg in "$SCRIPT_DIR/${PACKAGE_NAME}${KVERREL}${SUBARCH}"*.config
+	do
+		if [ "$count" -eq 0 ]; then
+			# do the first one by itself so that tools are built
+			process_config "$cfg" "$count"
+		fi
+		process_config "$cfg" "$count" &
+		waitpids[${count}]=$!
+		((count++))
+		while [ "$(jobs | grep Running | wc -l)" -ge $RHJOBS ]; do :; done
+	done
+	for pid in ${waitpids[*]}; do
+		wait ${pid}
+	done
+
+	rm "$SCRIPT_DIR"/*.config*.old
+
+	if ls .errors* 1> /dev/null 2>&1; then
+		RETURNCODE=1
+		cat .errors*
+		rm .errors* -f
+	fi
+	if ls .mismatches* 1> /dev/null 2>&1; then
+		RETURNCODE=1
+		cat .mismatches*
+		rm .mismatches* -f
+	fi
+
+	popd > /dev/null
+
+	[ $RETURNCODE -eq 0 ] && echo "Processed config files are in $SCRIPT_DIR"
+}
+
+CHECKOPTIONS=""
+NEWOPTIONS=""
+TESTRUN=""
+CHECKWARNINGS=""
+MAKEOPTS=""
+CC_IS_CLANG=0
+
+RETURNCODE=0
+
+while [[ $# -gt 0 ]]
+do
+	key="$1"
+	case $key in
+		-a)
+			CHECKOPTIONS="x"
+			NEWOPTIONS="x"
+			CHECKWARNINGS="x"
+			;;
+		-c)
+			CHECKOPTIONS="x"
+			;;
+		-h)
+			usage
+			;;
+		-n)
+			NEWOPTIONS="x"
+			;;
+		-t)
+			TESTRUN="x"
+			;;
+		-w)
+			CHECKWARNINGS="x"
+			;;
+		-z)
+			COMMITNEWCONFIGS="x"
+			;;
+		-m)
+			shift
+			if [ "$1" = "CC=clang" -o "$1" = "LLVM=1" ]; then
+				CC_IS_CLANG=1
+			fi
+			MAKEOPTS="$MAKEOPTS $1"
+			;;
+		*)
+			break;;
+	esac
+	shift
+done
+
+PACKAGE_NAME="${1:-kernel-rt}" # defines the package name used
+KVERREL="$(test -n "$2" && echo "-$2" || echo "")"
+SUBARCH="$(test -n "$3" && echo "-$3" || echo "")"
+FLAVOR="$(test -n "$4" && echo "-$4" || echo "-common")"
+RHJOBS="$(test -n "$5" && echo "$5" || nproc --all)"
+SCRIPT=$(readlink -f "$0")
+SCRIPT_DIR=$(dirname "$SCRIPT")
+
+# Most RHEL options are options we want in Fedora so RHEL pending settings head
+# to common/
+if [ "$FLAVOR" = "-rhel" ]
+then
+	FLAVOR="-common"
+fi
+
+# to handle this script being a symlink
+cd "$SCRIPT_DIR"
+
+if test -n "$COMMITNEWCONFIGS"; then
+	commit_new_configs
+else
+	process_configs
+fi
+
+exit $RETURNCODE

SOURCES/rpminspect.yaml

@@ -0,0 +1,30 @@
+# additional rpminspect configuration for this branch
+
+---
+inspections:
+    upstream: off
+
+badfuncs:
+    ignore:
+        - /usr/libexec/ksamples/*
+        - /usr/libexec/kselftests/*
+
+emptyrpm:
+    expected_empty:
+        - kernel
+        - kernel-debug
+        - kernel-debug-devel-matched
+        - kernel-devel-matched
+        - kernel-lpae
+        - kernel-zfcpdump
+        - kernel-zfcpdump-devel-matched
+        - kernel-zfcpdump-modules
+
+patches:
+    ignore_list:
+        - linux-kernel-test.patch
+        - patch-5.14.0-redhat.patch
+
+specname:
+    match: prefix
+    primary: filename

SOURCES/update_scripts.sh

@@ -0,0 +1,12 @@
+#!/bin/sh
+
+if [ -z "$1" ]; then
+	exit 1
+fi
+
+TARGET="$1"
+
+for i in "$RPM_SOURCE_DIR"/*."$TARGET"; do
+	NEW=${i%.$TARGET}
+	cp "$i" "$NEW"
+done

SOURCES/x509.genkey.centos

@@ -0,0 +1,16 @@
+[ req ]
+default_bits = 3072
+distinguished_name = req_distinguished_name
+prompt = no
+x509_extensions = myexts
+
+[ req_distinguished_name ]
+O = The CentOS Project
+CN = CentOS Stream kernel signing key
+emailAddress = security@centos.org
+
+[ myexts ]
+basicConstraints=critical,CA:FALSE
+keyUsage=digitalSignature
+subjectKeyIdentifier=hash
+authorityKeyIdentifier=keyid

SOURCES/x509.genkey.rhel

@@ -0,0 +1,16 @@
+[ req ]
+default_bits = 3072
+distinguished_name = req_distinguished_name
+prompt = no
+x509_extensions = myexts
+
+[ req_distinguished_name ]
+O = Red Hat
+CN = Red Hat Enterprise Linux kernel signing key
+emailAddress = secalert@redhat.com
+
+[ myexts ]
+basicConstraints=critical,CA:FALSE
+keyUsage=digitalSignature
+subjectKeyIdentifier=hash
+authorityKeyIdentifier=keyid