8 changed files with 246 additions and 889 deletions
--- a/SOURCES/0001-revert-change-default-value-for-ipv4.dad-timeout-from-0-to-200ms.patch
+++ b/SOURCES/0001-revert-change-default-value-for-ipv4.dad-timeout-from-0-to-200ms.patch
@ -1,61 +0,0 @@
 diff --git a/src/core/devices/nm-device.c b/src/core/devices/nm-device.c
 index 16f8e1f261..036233e668 100644
 --- a/src/core/devices/nm-device.c
 +++ b/src/core/devices/nm-device.c
@@ -1661,7 +1661,7 @@ _prop_get_ipv4_dad_timeout(NMDevice *self)
                                                        self,
                                                        0,
                                                        NM_SETTING_IP_CONFIG_DAD_TIMEOUT_MAX,
 -                                                       200);
 +                                                       0);
 }
 static guint32
 diff --git a/src/libnm-core-impl/nm-setting-ip-config.c b/src/libnm-core-impl/nm-setting-ip-config.c
 index bfebe7d13d..de56ed74ea 100644
 --- a/src/libnm-core-impl/nm-setting-ip-config.c
 +++ b/src/libnm-core-impl/nm-setting-ip-config.c
@@ -6655,7 +6655,7 @@ nm_setting_ip_config_class_init(NMSettingIPConfigClass *klass)
      *
      * A zero value means that no duplicate address detection is performed, -1 means
      * the default value (either the value configured globally in NetworkManger.conf
 -     * or 200ms).  A value greater than zero is a timeout in milliseconds.  Note that
 +     * or zero).  A value greater than zero is a timeout in milliseconds.  Note that
      * the time intervals are subject to randomization as per RFC 5227 and so the
      * actual duration can be between half and the full time specified in this
      * property.
 diff --git a/src/libnmc-setting/settings-docs.h.in b/src/libnmc-setting/settings-docs.h.in
 index 77cde6620e..e42cb74e7f 100644
 --- a/src/libnmc-setting/settings-docs.h.in
 +++ b/src/libnmc-setting/settings-docs.h.in
@@ -162,7 +162,7 @@
 #define DESCRIBE_DOC_NM_SETTING_INFINIBAND_TRANSPORT_MODE N_("The IP-over-InfiniBand transport mode. Either \"datagram\" or \"connected\".")
 #define DESCRIBE_DOC_NM_SETTING_IP4_CONFIG_ADDRESSES N_("A list of IPv4 addresses and their prefix length. Multiple addresses can be separated by comma. For example \"192.168.1.5/24, 10.1.0.5/24\". The addresses are listed in decreasing priority, meaning the first address will be the primary address.")
 #define DESCRIBE_DOC_NM_SETTING_IP4_CONFIG_AUTO_ROUTE_EXT_GW N_("VPN connections will default to add the route automatically unless this setting is set to FALSE. For other connection types, adding such an automatic route is currently not supported and setting this to TRUE has no effect.")
 -#define DESCRIBE_DOC_NM_SETTING_IP4_CONFIG_DAD_TIMEOUT N_("Maximum timeout in milliseconds used to check for the presence of duplicate IP addresses on the network.  If an address conflict is detected, the activation will fail. The property is currently implemented only for IPv4. A zero value means that no duplicate address detection is performed, -1 means the default value (either the value configured globally in NetworkManger.conf or 200ms).  A value greater than zero is a timeout in milliseconds.  Note that the time intervals are subject to randomization as per RFC 5227 and so the actual duration can be between half and the full time specified in this property.")
 +#define DESCRIBE_DOC_NM_SETTING_IP4_CONFIG_DAD_TIMEOUT N_("Maximum timeout in milliseconds used to check for the presence of duplicate IP addresses on the network.  If an address conflict is detected, the activation will fail. The property is currently implemented only for IPv4. A zero value means that no duplicate address detection is performed, -1 means the default value (either the value configured globally in NetworkManger.conf or zero).  A value greater than zero is a timeout in milliseconds.  Note that the time intervals are subject to randomization as per RFC 5227 and so the actual duration can be between half and the full time specified in this property.")
 #define DESCRIBE_DOC_NM_SETTING_IP4_CONFIG_DHCP_CLIENT_ID N_("A string sent to the DHCP server to identify the local machine which the DHCP server may use to customize the DHCP lease and options. When the property is a hex string ('aa:bb:cc') it is interpreted as a binary client ID, in which case the first byte is assumed to be the 'type' field as per RFC 2132 section 9.14 and the remaining bytes may be an hardware address (e.g. '01:xx:xx:xx:xx:xx:xx' where 1 is the Ethernet ARP type and the rest is a MAC address). If the property is not a hex string it is considered as a non-hardware-address client ID and the 'type' field is set to 0. The special values \"mac\" and \"perm-mac\" are supported, which use the current or permanent MAC address of the device to generate a client identifier with type ethernet (01). Currently, these options only work for ethernet type of links. The special value \"ipv6-duid\" uses the DUID from \"ipv6.dhcp-duid\" property as an RFC4361-compliant client identifier. As IAID it uses \"ipv4.dhcp-iaid\" and falls back to \"ipv6.dhcp-iaid\" if unset. The special value \"duid\" generates a RFC4361-compliant client identifier based on \"ipv4.dhcp-iaid\" and uses a DUID generated by hashing /etc/machine-id. The special value \"stable\" is supported to generate a type 0 client identifier based on the stable-id (see connection.stable-id) and a per-host key. If you set the stable-id, you may want to include the \"${DEVICE}\" or \"${MAC}\" specifier to get a per-device key. The special value \"none\" prevents any client identifier from being sent. Note that this is normally not recommended. If unset, a globally configured default from NetworkManager.conf is used. If still unset, the default depends on the DHCP plugin. The internal dhcp client will default to \"mac\" and the dhclient plugin will try to use one from its config file if present, or won't sent any client-id otherwise.")
 #define DESCRIBE_DOC_NM_SETTING_IP4_CONFIG_DHCP_DSCP N_("Specifies the value for the DSCP field (traffic class) of the IP header. When empty, the global default value is used; if no global default is specified, it is assumed to be \"CS0\". Allowed values are: \"CS0\", \"CS4\" and \"CS6\". The property is currently valid only for IPv4, and it is supported only by the \"internal\" DHCP plugin.")
 #define DESCRIBE_DOC_NM_SETTING_IP4_CONFIG_DHCP_FQDN N_("If the \"dhcp-send-hostname\" property is TRUE, then the specified FQDN will be sent to the DHCP server when acquiring a lease. This property and \"dhcp-hostname\" are mutually exclusive and cannot be set at the same time.")
@@ -192,7 +192,7 @@
 #define DESCRIBE_DOC_NM_SETTING_IP6_CONFIG_ADDR_GEN_MODE N_("Configure method for creating the IPv6 interface identifer of addresses with RFC4862 IPv6 Stateless Address Autoconfiguration and Link Local addresses. The permitted values are: \"eui64\" (0), \"stable-privacy\" (1), \"default\" (3) or \"default-or-eui64\" (2). If the property is set to \"eui64\", the addresses will be generated using the interface token derived from hardware address. This makes the host part of the address to stay constant, making it possible to track the host's presence when it changes networks. The address changes when the interface hardware is replaced. If a duplicate address is detected, there is also no fallback to generate another address. When configured, the \"ipv6.token\" is used instead of the MAC address to generate addresses for stateless autoconfiguration. If the property is set to \"stable-privacy\", the interface identifier is generated as specified by RFC7217. This works by hashing a host specific key (see NetworkManager(8) manual), the interface name, the connection's \"connection.stable-id\" property and the address prefix.  This improves privacy by making it harder to use the address to track the host's presence and the address is stable when the network interface hardware is replaced. The special values \"default\" and \"default-or-eui64\" will fallback to the global connection default as documented in the NetworkManager.conf(5) manual. If the global default is not specified, the fallback value is \"stable-privacy\" or \"eui64\", respectively. If not specified, when creating a new profile the default is \"default\". Note that this setting is distinct from the Privacy Extensions as configured by \"ip6-privacy\" property and it does not affect the temporary addresses configured with this option.")
 #define DESCRIBE_DOC_NM_SETTING_IP6_CONFIG_ADDRESSES N_("A list of IPv6 addresses and their prefix length. Multiple addresses can be separated by comma. For example \"2001:db8:85a3::8a2e:370:7334/64, 2001:db8:85a3::5/64\". The addresses are listed in decreasing priority, meaning the first address will be the primary address. This can make a difference with IPv6 source address selection (RFC 6724, section 5).")
 #define DESCRIBE_DOC_NM_SETTING_IP6_CONFIG_AUTO_ROUTE_EXT_GW N_("VPN connections will default to add the route automatically unless this setting is set to FALSE. For other connection types, adding such an automatic route is currently not supported and setting this to TRUE has no effect.")
 -#define DESCRIBE_DOC_NM_SETTING_IP6_CONFIG_DAD_TIMEOUT N_("Maximum timeout in milliseconds used to check for the presence of duplicate IP addresses on the network.  If an address conflict is detected, the activation will fail. The property is currently implemented only for IPv4. A zero value means that no duplicate address detection is performed, -1 means the default value (either the value configured globally in NetworkManger.conf or 200ms).  A value greater than zero is a timeout in milliseconds.  Note that the time intervals are subject to randomization as per RFC 5227 and so the actual duration can be between half and the full time specified in this property.")
 +#define DESCRIBE_DOC_NM_SETTING_IP6_CONFIG_DAD_TIMEOUT N_("Maximum timeout in milliseconds used to check for the presence of duplicate IP addresses on the network.  If an address conflict is detected, the activation will fail. The property is currently implemented only for IPv4. A zero value means that no duplicate address detection is performed, -1 means the default value (either the value configured globally in NetworkManger.conf or zero).  A value greater than zero is a timeout in milliseconds.  Note that the time intervals are subject to randomization as per RFC 5227 and so the actual duration can be between half and the full time specified in this property.")
 #define DESCRIBE_DOC_NM_SETTING_IP6_CONFIG_DHCP_DSCP N_("Specifies the value for the DSCP field (traffic class) of the IP header. When empty, the global default value is used; if no global default is specified, it is assumed to be \"CS0\". Allowed values are: \"CS0\", \"CS4\" and \"CS6\". The property is currently valid only for IPv4, and it is supported only by the \"internal\" DHCP plugin.")
 #define DESCRIBE_DOC_NM_SETTING_IP6_CONFIG_DHCP_DUID N_("A string containing the DHCPv6 Unique Identifier (DUID) used by the dhcp client to identify itself to DHCPv6 servers (RFC 3315). The DUID is carried in the Client Identifier option. If the property is a hex string ('aa:bb:cc') it is interpreted as a binary DUID and filled as an opaque value in the Client Identifier option. The special value \"lease\" will retrieve the DUID previously used from the lease file belonging to the connection. If no DUID is found and \"dhclient\" is the configured dhcp client, the DUID is searched in the system-wide dhclient lease file. If still no DUID is found, or another dhcp client is used, a global and permanent DUID-UUID (RFC 6355) will be generated based on the machine-id. The special values \"llt\" and \"ll\" will generate a DUID of type LLT or LL (see RFC 3315) based on the current MAC address of the device. In order to try providing a stable DUID-LLT, the time field will contain a constant timestamp that is used globally (for all profiles) and persisted to disk. The special values \"stable-llt\", \"stable-ll\" and \"stable-uuid\" will generate a DUID of the corresponding type, derived from the connection's stable-id and a per-host unique key. You may want to include the \"${DEVICE}\" or \"${MAC}\" specifier in the stable-id, in case this profile gets activated on multiple devices. So, the link-layer address of \"stable-ll\" and \"stable-llt\" will be a generated address derived from the stable id. The DUID-LLT time value in the \"stable-llt\" option will be picked among a static timespan of three years (the upper bound of the interval is the same constant timestamp used in \"llt\"). When the property is unset, the global value provided for \"ipv6.dhcp-duid\" is used. If no global value is provided, the default \"lease\" value is assumed.")
 #define DESCRIBE_DOC_NM_SETTING_IP6_CONFIG_DHCP_HOSTNAME N_("If the \"dhcp-send-hostname\" property is TRUE, then the specified name will be sent to the DHCP server when acquiring a lease. This property and \"dhcp-fqdn\" are mutually exclusive and cannot be set at the same time.")
 diff --git a/src/nmcli/gen-metadata-nm-settings-nmcli.xml.in b/src/nmcli/gen-metadata-nm-settings-nmcli.xml.in
 index 8806bf2550..09648f3ff8 100644
 --- a/src/nmcli/gen-metadata-nm-settings-nmcli.xml.in
 +++ b/src/nmcli/gen-metadata-nm-settings-nmcli.xml.in
@@ -1337,7 +1337,7 @@
                   values="-1 - 2147483647"
                   special-values="default (-1), infinity (2147483647)" />
         <property name="dad-timeout"
 -                  nmcli-description="Maximum timeout in milliseconds used to check for the presence of duplicate IP addresses on the network.  If an address conflict is detected, the activation will fail. The property is currently implemented only for IPv4. A zero value means that no duplicate address detection is performed, -1 means the default value (either the value configured globally in NetworkManger.conf or 200ms).  A value greater than zero is a timeout in milliseconds.  Note that the time intervals are subject to randomization as per RFC 5227 and so the actual duration can be between half and the full time specified in this property."
 +                  nmcli-description="Maximum timeout in milliseconds used to check for the presence of duplicate IP addresses on the network.  If an address conflict is detected, the activation will fail. The property is currently implemented only for IPv4. A zero value means that no duplicate address detection is performed, -1 means the default value (either the value configured globally in NetworkManger.conf or zero).  A value greater than zero is a timeout in milliseconds.  Note that the time intervals are subject to randomization as per RFC 5227 and so the actual duration can be between half and the full time specified in this property."
                   format="integer"
                   values="-1 - 30000"
                   special-values="default (-1), off (0)" />
--- a/SOURCES/1001-cloud-setup-allow-bigger-restart-bursts-rhel-56740.patch
+++ b/SOURCES/1001-cloud-setup-allow-bigger-restart-bursts-rhel-56740.patch
@ -1,45 +0,0 @@
 From 065584036f8072c994a8bdab210bcfd0ff483960 Mon Sep 17 00:00:00 2001
 From: Lubomir Rintel <lkundrak@v3.sk>
 Date: Tue, 27 Aug 2024 00:29:17 +0200
 Subject: [PATCH] cloud-setup: allow bigger restart bursts
 On daemon startup, we may end up enqueueing many nm-cloud-setup.service
 restarts in very a short time. That is perfectly fine, just bump the
 thresholds so that systemd doesn't get in the way too quickly.
 100 requests in 1 seconds seem like a fair choice -- little bit on the
 conservative side, yet still giving the service manager some room to
 interfere on a chance things really go awry.
 https://issues.redhat.com/browse/RHEL-49694
 (cherry picked from commit 927cff9f178911b2a146259a89bfcc9727cbd8c3)
 (cherry picked from commit 4dc35c72744f8820575ab0ea4638c4ddd880547d)
 ---
 src/nm-cloud-setup/nm-cloud-setup.service.in | 11 +++++++++++
 1 file changed, 11 insertions(+)
 diff --git a/src/nm-cloud-setup/nm-cloud-setup.service.in b/src/nm-cloud-setup/nm-cloud-setup.service.in
 index e73654d892..ecb70e1c8e 100644
 --- a/src/nm-cloud-setup/nm-cloud-setup.service.in
 +++ b/src/nm-cloud-setup/nm-cloud-setup.service.in
@@ -8,6 +8,17 @@ After=NetworkManager.service
 Type=oneshot
 ExecStart=@libexecdir@/nm-cloud-setup
 +# The service restart gets triggered from dispatcher script
 +# (pre-up and dhcp4-change actions), possibly ending up with many
 +# restart requests at the same time (e.g. on initial daemon startup
 +# on a machine with multiple NICs). The systemd handles multiple
 +# concurrent restart requests gracefully (the newer requests supersede
 +# older, which wait for them to finish), but the default limits are way
 +# too low: 5 restarts in 10 seconds. Raise that high enough for us to
 +# be on the safe side.
 +StartLimitIntervalSec=1
 +StartLimitBurst=100
 +
 #Environment=NM_CLOUD_SETUP_LOG=TRACE
 # Cloud providers are disabled by default. You need to
 -- 
 2.46.0
--- a/SOURCES/1002-cloud-setup-ensure-azure-places-primary-address-first-rhel-56387.patch
+++ b/SOURCES/1002-cloud-setup-ensure-azure-places-primary-address-first-rhel-56387.patch
@ -1,140 +0,0 @@
 From 7183fbf6f35572f9fb0c2eeef5c155a3b9c82a54 Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?=C3=8D=C3=B1igo=20Huguet?= <ihuguet@redhat.com>
 Date: Tue, 27 Aug 2024 12:08:16 +0200
 Subject: [PATCH] cloud-setup: azure: ensure that primary address is placed
 first
 The primary address is that placed at position 0 of all the IP Addresses
 of the interface. Sometimes we put it in a different position in the
 ipv4s array because we insert them in the order we receive, but it might
 happen that the HTTP responses comes back in wrong order.
 In order to solve this, we pass the index of the IPv4 address to the
 callback and the address is added in the right position directly.
 Co-authored-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
 (cherry picked from commit 72014db629cff33611ade58190d45a714efa1bbf)
 (cherry picked from commit c976e212372da9683a1e2f8618e3bcfdf21d5e25)
 ---
 src/nm-cloud-setup/nmcs-provider-azure.c | 43 ++++++++++++++++--------
 1 file changed, 29 insertions(+), 14 deletions(-)
 diff --git a/src/nm-cloud-setup/nmcs-provider-azure.c b/src/nm-cloud-setup/nmcs-provider-azure.c
 index 771c43d9ad..78eda16cbb 100644
 --- a/src/nm-cloud-setup/nmcs-provider-azure.c
 +++ b/src/nm-cloud-setup/nmcs-provider-azure.c
@@ -102,6 +102,11 @@ typedef struct {
     guint                           n_iface_data_pending;
 } AzureIfaceData;
 +typedef struct {
 +    AzureIfaceData *iface_data;
 +    guint64         ipaddress_idx;
 +} AzureIpAddressReqData;
 +
 static void
 _azure_iface_data_destroy(AzureIfaceData *iface_data)
 {
@@ -112,7 +117,8 @@ static void
 _get_config_fetch_done_cb(NMHttpClient      *http_client,
                           GAsyncResult      *result,
                           AzureIfaceData    *iface_data,
 -                          GetConfigFetchType fetch_type)
 +                          GetConfigFetchType fetch_type,
 +                          guint64            ipaddress_idx)
 {
     NMCSProviderGetConfigTaskData  *get_config_data;
     NMCSProviderGetConfigIfaceData *iface_get_config;
@@ -149,9 +155,7 @@ _get_config_fetch_done_cb(NMHttpClient      *http_client,
         _LOGD("interface[%" G_GSSIZE_FORMAT "]: received address %s",
               iface_data->intern_iface_idx,
               nm_inet4_ntop(tmp_addr, tmp_addr_str));
 -        iface_get_config->ipv4s_arr[iface_get_config->ipv4s_len] = tmp_addr;
 -        iface_get_config->has_ipv4s                              = TRUE;
 -        iface_get_config->ipv4s_len++;
 +        iface_get_config->ipv4s_arr[ipaddress_idx] = tmp_addr;
         break;
     case GET_CONFIG_FETCH_TYPE_IPV4_SUBNET_0_ADDRESS:
@@ -203,10 +207,14 @@ _get_config_fetch_done_cb_ipv4_ipaddress_x_privateipaddress(GObject      *source
                                                             GAsyncResult *result,
                                                             gpointer      user_data)
 {
 +    AzureIpAddressReqData *ipaddress_req_data = user_data;
 +
     _get_config_fetch_done_cb(NM_HTTP_CLIENT(source),
                               result,
 -                              user_data,
 -                              GET_CONFIG_FETCH_TYPE_IPV4_IPADDRESS_X_PRIVATEIPADDRESS);
 +                              ipaddress_req_data->iface_data,
 +                              GET_CONFIG_FETCH_TYPE_IPV4_IPADDRESS_X_PRIVATEIPADDRESS,
 +                              ipaddress_req_data->ipaddress_idx);
 +    g_free(ipaddress_req_data);
 }
 static void
@@ -217,7 +225,8 @@ _get_config_fetch_done_cb_ipv4_subnet_0_address(GObject      *source,
     _get_config_fetch_done_cb(NM_HTTP_CLIENT(source),
                               result,
                               user_data,
 -                              GET_CONFIG_FETCH_TYPE_IPV4_SUBNET_0_ADDRESS);
 +                              GET_CONFIG_FETCH_TYPE_IPV4_SUBNET_0_ADDRESS,
 +                              0);
 }
 static void
@@ -228,7 +237,8 @@ _get_config_fetch_done_cb_ipv4_subnet_0_prefix(GObject      *source,
     _get_config_fetch_done_cb(NM_HTTP_CLIENT(source),
                               result,
                               user_data,
 -                              GET_CONFIG_FETCH_TYPE_IPV4_SUBNET_0_PREFIX);
 +                              GET_CONFIG_FETCH_TYPE_IPV4_SUBNET_0_PREFIX,
 +                              0);
 }
 static void
@@ -265,9 +275,10 @@ _get_config_ips_prefix_list_cb(GObject *source, GAsyncResult *result, gpointer u
     nm_sprintf_buf(iface_idx_str, "%" G_GSSIZE_FORMAT, iface_data->intern_iface_idx);
     while (nm_utils_parse_next_line(&response_str, &response_len, &line, &line_len)) {
 -        gint64        ips_prefix_idx;
 -        gs_free char *uri = NULL;
 -        char          buf[100];
 +        AzureIpAddressReqData *ipaddress_req_data;
 +        gint64                 ips_prefix_idx;
 +        gs_free char          *uri = NULL;
 +        char                   buf[100];
         if (line_len == 0)
             continue;
@@ -284,8 +295,11 @@ _get_config_ips_prefix_list_cb(GObject *source, GAsyncResult *result, gpointer u
         if (ips_prefix_idx < 0)
             continue;
 -        iface_data->n_iface_data_pending++;
 +        ipaddress_req_data                = g_new(AzureIpAddressReqData, 1);
 +        ipaddress_req_data->iface_data    = iface_data;
 +        ipaddress_req_data->ipaddress_idx = ips_prefix_idx;
 +        iface_data->n_iface_data_pending++;
         nm_http_client_poll_req(
             NM_HTTP_CLIENT(source),
             (uri = _azure_uri_interfaces(iface_idx_str,
@@ -302,11 +316,12 @@ _get_config_ips_prefix_list_cb(GObject *source, GAsyncResult *result, gpointer u
             NULL,
             NULL,
             _get_config_fetch_done_cb_ipv4_ipaddress_x_privateipaddress,
 -            iface_data);
 +            ipaddress_req_data);
     }
 -    iface_data->iface_get_config->ipv4s_len = 0;
     iface_data->iface_get_config->ipv4s_arr = g_new(in_addr_t, iface_data->n_iface_data_pending);
 +    iface_data->iface_get_config->has_ipv4s = TRUE;
 +    iface_data->iface_get_config->ipv4s_len = iface_data->n_iface_data_pending;
     {
         gs_free char *uri = NULL;
 -- 
 2.46.0
--- a/SOURCES/1003-only-validate-sriov-capability-when-enabled-rhel-58397.patch
+++ b/SOURCES/1003-only-validate-sriov-capability-when-enabled-rhel-58397.patch
@ -1,74 +0,0 @@
 From d9dd0aeff8ba2e1a0005c2e5751907c453927c5c Mon Sep 17 00:00:00 2001
 From: Gris Ge <fge@redhat.com>
 Date: Mon, 21 Oct 2024 21:13:29 +0800
 Subject: [PATCH] sriov: only valid sriov capacity when enabled
 NetworkManager current code will refuse to activate a connection if its
 interface has no SRIOV capacity but holding a empty SRIOV settings.
 This patch only valid SRIOV capacity when it is enabled(total_vfs > 0).
 Resolves: https://issues.redhat.com/browse/RHEL-58397
 Signed-off-by: Gris Ge <fge@redhat.com>
 (cherry picked from commit 421ccf8b4cb85c96db3bf1cb6a860e41a784c950)
 (cherry picked from commit c9e31e70cbf62c65cec460dc198712a61351e9f4)
 (cherry picked from commit 90a3b014683c3c98c9fb4bbe2add65510e7f1b31)
 ---
 src/core/devices/nm-device.c | 19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)
 diff --git a/src/core/devices/nm-device.c b/src/core/devices/nm-device.c
 index 4780003a0a..e86c32a902 100644
 --- a/src/core/devices/nm-device.c
 +++ b/src/core/devices/nm-device.c
@@ -9468,6 +9468,7 @@ check_connection_compatible(NMDevice     *self,
     NMSettingMatch       *s_match;
     const GSList         *specs;
     gboolean              has_match = FALSE;
 +    NMSettingSriov       *s_sriov   = NULL;
     klass = NM_DEVICE_GET_CLASS(self);
     if (klass->connection_type_check_compatible) {
@@ -9485,12 +9486,14 @@ check_connection_compatible(NMDevice     *self,
         return FALSE;
     }
 -    if (!nm_device_has_capability(self, NM_DEVICE_CAP_SRIOV)
 -        && nm_connection_get_setting(connection, NM_TYPE_SETTING_SRIOV)) {
 -        nm_utils_error_set_literal(error,
 -                                   NM_UTILS_ERROR_CONNECTION_AVAILABLE_TEMPORARY,
 -                                   "device does not support SR-IOV");
 -        return FALSE;
 +    if (!nm_device_has_capability(self, NM_DEVICE_CAP_SRIOV)) {
 +        s_sriov = (NMSettingSriov *) nm_connection_get_setting(connection, NM_TYPE_SETTING_SRIOV);
 +        if (s_sriov && nm_setting_sriov_get_total_vfs(s_sriov)) {
 +            nm_utils_error_set_literal(error,
 +                                       NM_UTILS_ERROR_CONNECTION_AVAILABLE_TEMPORARY,
 +                                       "device does not support SR-IOV");
 +            return FALSE;
 +        }
     }
     conn_iface = nm_manager_get_connection_iface(NM_MANAGER_GET, connection, NULL, NULL, &local);
@@ -10101,7 +10104,7 @@ activate_stage1_device_prepare(NMDevice *self)
             s_sriov = nm_device_get_applied_setting(self, NM_TYPE_SETTING_SRIOV);
         }
 -        if (s_sriov) {
 +        if (s_sriov && nm_device_has_capability(self, NM_DEVICE_CAP_SRIOV)) {
             nm_auto_freev NMPlatformVF **plat_vfs = NULL;
             gs_free_error GError        *error    = NULL;
             NMSriovVF                   *vf;
@@ -10109,8 +10112,6 @@ activate_stage1_device_prepare(NMDevice *self)
             guint                        num;
             guint                        i;
 -            nm_assert(nm_device_has_capability(self, NM_DEVICE_CAP_SRIOV));
 -
             autoprobe = nm_setting_sriov_get_autoprobe_drivers(s_sriov);
             if (autoprobe == NM_TERNARY_DEFAULT) {
                 autoprobe = nm_config_data_get_connection_default_int64(
 -- 
 2.45.2
--- a/SOURCES/1004-fix-bug-when-deactivating-port-connections-rhel-50747.patch
+++ b/SOURCES/1004-fix-bug-when-deactivating-port-connections-rhel-50747.patch
@ -1,136 +0,0 @@
 From 3b1181dc02172033d8e2bb7fd2336b2ea0355a87 Mon Sep 17 00:00:00 2001
 From: Beniamino Galvani <bgalvani@redhat.com>
 Date: Mon, 23 Sep 2024 17:28:03 +0200
 Subject: [PATCH] device: fix bug when deactivating port connections
 asynchronously
 When the attach_port()/detach_port() methods do not return immediately
 (currently, only for OVS ports), the following situation can arise:
 - nm_device_controller_attach_port() starts the attachment by sending
   the command to ovsdb. Note that here we don't set
   `PortInfo->port_is_attached` to TRUE yet; that happens only after
   the asynchronous command returns;
 - the activation of the port gets interrupted because the connection
   is deleted;
 - the port device enters the deactivating state, triggering function
   port_state_changed()
 - the function calls nm_device_controller_release_port() which checks
   whether the port is already attached; since
   `PortInfo->port_is_attached` is not set yet, it assumes the port
   doesn't need to be detached;
 - in the meantime, the ovsdb operation succeeds. As a consequence,
   the kernel link is created even if the connection no longer exists.
 Fix this by turning `port_is_attached` into a tri-state variable that
 also tracks when the port is attaching. When it is, we need to perform
 an explicit detach during deactivation.
 Fixes: 9fcbc6b37dec ('device: make attach_port() asynchronous')
 https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/2043
 Resolves: https://issues.redhat.com/browse/RHEL-58026
 (cherry picked from commit a8329587c8bdd53e2bc4513a4e82529727cfa5ef)
 (cherry picked from commit d809ca6db24b5145fcc1857b962afb7ae17d07a5)
 (cherry picked from commit ca6ca684b21235f706b02cee42075f2ee3cb1795)
 ---
 src/core/devices/nm-device.c | 27 ++++++++++++++++++++++-----
 1 file changed, 22 insertions(+), 5 deletions(-)
 diff --git a/src/core/devices/nm-device.c b/src/core/devices/nm-device.c
 index e86c32a902..f9a2e7e8fe 100644
 --- a/src/core/devices/nm-device.c
 +++ b/src/core/devices/nm-device.c
@@ -126,12 +126,18 @@ typedef enum _nm_packed {
     ADDR_METHOD_STATE_FAILED,
 } AddrMethodState;
 +typedef enum {
 +    PORT_STATE_NOT_ATTACHED,
 +    PORT_STATE_ATTACHED,
 +    PORT_STATE_ATTACHING,
 +} PortState;
 +
 typedef struct {
     CList         lst_port;
     NMDevice     *port;
     GCancellable *cancellable;
     gulong        watch_id;
 -    bool          port_is_attached;
 +    PortState     port_state;
     bool          configure;
 } PortInfo;
@@ -6693,7 +6699,7 @@ attach_port_done(NMDevice *self, NMDevice *port, gboolean success)
     if (!info)
         return;
 -    info->port_is_attached = success;
 +    info->port_state = (success ? PORT_STATE_ATTACHED : PORT_STATE_NOT_ATTACHED);
     nm_device_port_notify_attach_as_port(info->port, success);
@@ -6756,7 +6762,7 @@ nm_device_controller_attach_port(NMDevice *self, NMDevice *port, NMConnection *c
     if (!info)
         return;
 -    if (info->port_is_attached)
 +    if (info->port_state == PORT_STATE_ATTACHED)
         success = TRUE;
     else {
         configure = (info->configure && connection != NULL);
@@ -6765,6 +6771,7 @@ nm_device_controller_attach_port(NMDevice *self, NMDevice *port, NMConnection *c
         nm_clear_g_cancellable(&info->cancellable);
         info->cancellable = g_cancellable_new();
 +        info->port_state  = PORT_STATE_ATTACHING;
         success           = NM_DEVICE_GET_CLASS(self)->attach_port(self,
                                                          port,
                                                          connection,
@@ -6819,6 +6826,7 @@ nm_device_controller_release_port(NMDevice           *self,
     PortInfo                 *info;
     gs_unref_object NMDevice *self_free = NULL;
     gs_unref_object NMDevice *port_free = NULL;
 +    const char               *port_state_str;
     g_return_if_fail(NM_DEVICE(self));
     g_return_if_fail(NM_DEVICE(port));
@@ -6830,11 +6838,20 @@ nm_device_controller_release_port(NMDevice           *self,
     info = find_port_info(self, port);
 +    if (info->port_state == PORT_STATE_ATTACHED)
 +        port_state_str = "(attached)";
 +    else if (info->port_state == PORT_STATE_NOT_ATTACHED)
 +        port_state_str = "(not attached)";
 +    else {
 +        nm_assert(info->port_state == PORT_STATE_ATTACHING);
 +        port_state_str = "(attaching)";
 +    }
 +
     _LOGT(LOGD_CORE,
           "controller: release one port " NM_HASH_OBFUSCATE_PTR_FMT "/%s %s%s",
           NM_HASH_OBFUSCATE_PTR(port),
           nm_device_get_iface(port),
 -          !info ? "(not registered)" : (info->port_is_attached ? "(attached)" : "(not attached)"),
 +          !info ? "(not registered)" : port_state_str,
           release_type == RELEASE_PORT_TYPE_CONFIG_FORCE
               ? " (force-configure)"
               : (release_type == RELEASE_PORT_TYPE_CONFIG ? " (configure)" : "(no-config)"));
@@ -6850,7 +6867,7 @@ nm_device_controller_release_port(NMDevice           *self,
     nm_clear_g_cancellable(&info->cancellable);
     /* first, let subclasses handle the release ... */
 -    if (info->port_is_attached || nm_device_sys_iface_state_is_external(port)
 +    if (info->port_state != PORT_STATE_NOT_ATTACHED || nm_device_sys_iface_state_is_external(port)
         || release_type >= RELEASE_PORT_TYPE_CONFIG_FORCE) {
         NMTernary ret;
 -- 
 2.45.2
--- a/SOURCES/1005-fix-validation-of-ovs-dpdk-interface-name-rhel-60022.patch
+++ b/SOURCES/1005-fix-validation-of-ovs-dpdk-interface-name-rhel-60022.patch
@ -1,57 +0,0 @@
 From fd2768da4c3f966a215f01f09f8b5d7d534d0193 Mon Sep 17 00:00:00 2001
 From: Beniamino Galvani <bgalvani@redhat.com>
 Date: Tue, 24 Sep 2024 16:25:03 +0200
 Subject: [PATCH] libnm-core: fix validation of ovs-dpdk interface name
 An ovs-dpdk interface doesn't have a kernel link and doesn't have the
 15-character limit on the name.
 Fixes: 3efe070dfc7a ('libnm: validate "connection.interface-name" at one place only')
 Resolves: https://issues.redhat.com/browse/RHEL-60233
 https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/2044
 (cherry picked from commit fda05b0af085d9f7e4cc5691075dae63e7bf02a6)
 (cherry picked from commit f6e4e537757a414cc896bc1b402da8c9c9e32eaa)
 (cherry picked from commit c7035db5b43beff7ad7e91685ff17982a540d8e2)
 ---
 src/libnm-core-impl/nm-setting-connection.c | 4 ++--
 src/libnm-core-impl/tests/test-general.c    | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)
 diff --git a/src/libnm-core-impl/nm-setting-connection.c b/src/libnm-core-impl/nm-setting-connection.c
 index b51cd46bdd..3298dce60a 100644
 --- a/src/libnm-core-impl/nm-setting-connection.c
 +++ b/src/libnm-core-impl/nm-setting-connection.c
@@ -1379,13 +1379,13 @@ verify(NMSetting *setting, NMConnection *connection, GError **error)
                 if (connection)
                     goto after_interface_name;
                 iface_type = NMU_IFACE_ANY;
 -            } else if (NM_IN_STRSET(ovs_iface_type, "patch")) {
 +            } else if (NM_IN_STRSET(ovs_iface_type, "patch", "dpdk")) {
                 /* this interface type is internal to OVS. */
                 iface_type = NMU_IFACE_OVS;
             } else {
                 /* This interface type also requires a netdev. We need to validate
                  * for both OVS and KERNEL. */
 -                nm_assert(NM_IN_STRSET(ovs_iface_type, "internal", "system", "dpdk"));
 +                nm_assert(NM_IN_STRSET(ovs_iface_type, "internal", "system"));
                 iface_type = NMU_IFACE_OVS_AND_KERNEL;
             }
         } else
 diff --git a/src/libnm-core-impl/tests/test-general.c b/src/libnm-core-impl/tests/test-general.c
 index 0a39010c11..8d4ea069c5 100644
 --- a/src/libnm-core-impl/tests/test-general.c
 +++ b/src/libnm-core-impl/tests/test-general.c
@@ -10832,7 +10832,7 @@ test_connection_ovs_ifname(gconstpointer test_data)
     /* good if bridge, port, or patch interface */
     g_object_set(s_con, NM_SETTING_CONNECTION_INTERFACE_NAME, "ovs123123123123130123123", NULL);
 -    if (!ovs_iface_type || nm_streq(ovs_iface_type, "patch"))
 +    if (!ovs_iface_type || NM_IN_STRSET(ovs_iface_type, "patch", "dpdk"))
         nmtst_assert_connection_verifies(con);
     else {
         nmtst_assert_connection_unnormalizable(con,
 -- 
 2.45.2
--- a/SOURCES/readme-ifcfg-rh.txt
+++ b/SOURCES/readme-ifcfg-rh.txt
@ -29,3 +29,35 @@ Alternatively, to migrate only a specific profile, enter:
 For further details, see:
 * nm-settings-keyfile(5)
 * nmcli(1)
 Interface renaming
 ==================
 Connection profiles stored in ifcfg-rh format support the renaming of
 interfaces via udev. This is done via a helper tool
 /usr/lib/udev/rename_device that is invoked by udev to parse the files
 in /etc/sysconfig/network-scripts; when the HWADDR and DEVICE
 variables are set, the interface that matches the MAC address in
 HWADDR is renamed to the name specified in DEVICE.
 Connections in keyfile format don't provide the same integration with
 udev. The renaming of interfaces must be configured directly in udev,
 for example by creating a file:
  /etc/systemd/network/70-rename.link
 with content:
  [Match]
  MACAddress=00:11:22:33:44:56
  [Link]
  Name=ethernet1
 Alternatively, a udev rule can also be used, such as:
  /etc/udev/rules.d/70-interface-names.rules
 with content:
  SUBSYSTEM=="net",ACTION=="add",ATTR{address}=="00:11:22:33:44:56",ATTR{type}=="1",NAME="ethernet1"
--- a/SPECS/NetworkManager.spec
+++ b/SPECS/NetworkManager.spec
@ -6,7 +6,7 @@
 %global epoch_version 1
 %global real_version 1.48.10
 %global rpm_version %{real_version}
-%global release_version 3
+%global release_version 1
 %global snapshot %{nil}
 %global git_sha %{nil}
 %global bcond_default_debug 0
@ -17,6 +17,9 @@
 %global obsoletes_ppp_plugin         1:1.5.3
 %global obsoletes_initscripts_updown 1:1.36.0-0.6
 %global obsoletes_ifcfg_rh           1:1.36.2
 %global obsoletes_team               1:1.47.5-3
 %global obsoletes_initscripts_ifcfg_rh  1:1.47.5-3
 %global obsoletes_dispatcher_routing_rules  1:1.47.5-3
 %global nmlibdir %{_prefix}/lib/%{name}
 %global nmplugindir %{_libdir}/%{name}/%{version}-%{release}
@ -39,12 +42,19 @@
 %global systemd_units_cloud_setup nm-cloud-setup.service nm-cloud-setup.timer
 ###############################################################################
-
+%if 0%{?fedora} > 40 || 0%{?rhel} >= 10
-%bcond_with meson
+%bcond_without meson
 %else
 %bcond_with    meson
 %endif
 %bcond_without adsl
 %bcond_without bluetooth
 %bcond_without wwan
 %if 0%{?rhel} >= 10
 %bcond_with team
 %else
 %bcond_without team
 %endif
 %bcond_without wifi
 %bcond_without ovs
 %bcond_without ppp
@ -149,13 +159,18 @@
 %global config_plugins_default_ifcfg_rh 1
 %endif
-%if 0%{?fedora} >= 36 || 0%{?rhel} >= 10
+%if 0%{?rhel} >= 10
 %global with_ifcfg_rh 0
 %global split_ifcfg_rh 0
 %elif 0%{?fedora} >= 36
 %global with_ifcfg_rh 1
 %global split_ifcfg_rh 1
 %else
 %global with_ifcfg_rh 1
 %global split_ifcfg_rh 0
 %endif
-%if (0%{?fedora} >= 36 && 0%{?fedora} < 39) || 0%{?rhel} >= 9
+%if (0%{?fedora} >= 36 && 0%{?fedora} < 39) || 0%{?rhel} == 9
 %global ifcfg_warning 1
 %else
 %global ifcfg_warning 0
@ -208,14 +223,9 @@ Source9: readme-ifcfg-rh-migrated.txt
 # These are not bugfixes, hence they are also relevant after
 # the next rebase of the source tarball.
 # Patch0001: 0001-some.patch
 Patch0001: 0001-revert-change-default-value-for-ipv4.dad-timeout-from-0-to-200ms.patch
 # Bugfixes that are only relevant until next rebase of the package.
-Patch1001: 1001-cloud-setup-allow-bigger-restart-bursts-rhel-56740.patch
+# Patch1001: 1001-some.patch
 Patch1002: 1002-cloud-setup-ensure-azure-places-primary-address-first-rhel-56387.patch
 Patch1003: 1003-only-validate-sriov-capability-when-enabled-rhel-58397.patch
 Patch1004: 1004-fix-bug-when-deactivating-port-connections-rhel-50747.patch
 Patch1005: 1005-fix-validation-of-ovs-dpdk-interface-name-rhel-60022.patch
 Requires(post): systemd
 %if 0%{?fedora} || 0%{?rhel} >= 8
@ -248,11 +258,22 @@ Obsoletes: NetworkManager < %{obsoletes_ifcfg_rh}
 Requires: wpa_supplicant >= 1:1.1
 %endif
 %if 0%{?rhel} && 0%{?rhel} >= 10
 Obsoletes: NetworkManager-team < %{obsoletes_team}
 Obsoletes: NetworkManager-initscripts-ifcfg-rh < %{obsoletes_initscripts_ifcfg_rh}
 Obsoletes: NetworkManager-dispatcher-routing-rules < %{obsoletes_dispatcher_routing_rules}
 %endif
 Conflicts: NetworkManager-vpnc < 1:0.7.0.99-1
 Conflicts: NetworkManager-openvpn < 1:0.7.0.99-1
 Conflicts: NetworkManager-pptp < 1:0.7.0.99-1
 Conflicts: NetworkManager-openconnect < 0:0.7.0.99-1
 Conflicts: kde-plasma-networkmanagement < 1:0.9-0.49.20110527git.nm09
 %if 0%{?rhel} && 0%{?rhel} >= 10
 Conflicts: NetworkManager-team <= 1:1.47.5-3
 Conflicts: NetworkManager-initscripts-ifcfg-rh <= 1:1.47.5-3
 Conflicts: NetworkManager-dispatcher-routing-rules <= 1:1.47.5-3
 %endif
 BuildRequires: make
 BuildRequires: gcc
@ -541,13 +562,13 @@ This package is intended to be installed by default for server
 deployments.
 %if %{?with_ifcfg_rh}
 %package dispatcher-routing-rules
 Summary: NetworkManager dispatcher file for advanced routing rules
 Group: System Environment/Base
 %if 0%{?split_ifcfg_rh}
 Requires: %{name}-initscripts-ifcfg-rh
 %endif
 Requires: ipcalc
 BuildArch: noarch
 Provides: %{name}-config-routing-rules = %{epoch}:%{version}-%{release}
 Obsoletes: %{name}-config-routing-rules < 1:1.31.0
@ -556,6 +577,7 @@ Obsoletes: %{name}-config-routing-rules < 1:1.31.0
 This adds a NetworkManager dispatcher file to support networking
 configurations using "/etc/sysconfig/network-scripts/rule-NAME" files
 (eg, to do policy-based routing).
 %endif
 %if %{with nmtui}
@ -599,6 +621,7 @@ like Aliyun, Azure, EC2, GCP are supported.
 %endif
 %if %{?with_ifcfg_rh}
 %package initscripts-updown
 Summary: Legacy ifup/ifdown scripts for NetworkManager that replace initscripts (network-scripts)
 Group: System Environment/Base
@ -611,7 +634,7 @@ Obsoletes: NetworkManager < %{obsoletes_initscripts_updown}
 Installs alternative ifup/ifdown scripts that talk to NetworkManager.
 This is only for backward compatibility with initscripts (network-scripts).
 Preferably use nmcli instead.
-
+%endif
 %prep
 %autosetup -p1 -n NetworkManager-%{real_version}
@ -725,7 +748,11 @@ Preferably use nmcli instead.
 	-Ddbus_conf_dir=%{dbus_sys_dir} \
 	-Dtests=yes \
 	-Dvalgrind=no \
 %if %{?with_ifcfg_rh}
 	-Difcfg_rh=true \
 %else
 	-Difcfg_rh=false \
 %endif
 	-Difupdown=false \
 %if %{with ppp}
 	-Dppp=true \
@ -873,7 +900,11 @@ autoreconf --install --force
 	--enable-more-warnings=yes \
 %endif
 	--with-valgrind=no \
 %if %{?with_ifcfg_rh}
 	--enable-ifcfg-rh=yes \
 %else
        --enable-ifcfg-rh=no \
 %endif
 	--enable-ifupdown=no \
 %if %{with ppp}
 	--enable-ppp=yes \
@ -936,9 +967,11 @@ cp %{SOURCE8} %{buildroot}%{_sysconfdir}/sysconfig/network-scripts
 cp %{SOURCE9} %{buildroot}%{_sysconfdir}/sysconfig/network-scripts/readme-ifcfg-rh.txt
 %endif
 %if %{?with_ifcfg_rh}
 cp examples/dispatcher/10-ifcfg-rh-routes.sh %{buildroot}%{nmlibdir}/dispatcher.d/
 ln -s ../no-wait.d/10-ifcfg-rh-routes.sh %{buildroot}%{nmlibdir}/dispatcher.d/pre-up.d/
 ln -s ../10-ifcfg-rh-routes.sh %{buildroot}%{nmlibdir}/dispatcher.d/no-wait.d/
 %endif
 %find_lang %{name}
@ -954,9 +987,10 @@ mkdir -p %{buildroot}%{_prefix}/src/debug/NetworkManager-%{real_version}
 cp valgrind.suppressions %{buildroot}%{_prefix}/src/debug/NetworkManager-%{real_version}
 %endif
 %if %{?with_ifcfg_rh}
 touch %{buildroot}%{_sbindir}/ifup
 touch %{buildroot}%{_sbindir}/ifdown
-
+%endif
 %check
 %if %{with meson}
@ -999,6 +1033,7 @@ fi
 %systemd_post %{systemd_units}
 %if %{?with_ifcfg_rh}
 %post initscripts-updown
 if [ -f %{_sbindir}/ifup -a ! -L %{_sbindir}/ifup ]; then
    # initscripts package too old, won't let us set an alternative
@ -1007,6 +1042,7 @@ else
    /usr/sbin/update-alternatives --install %{_sbindir}/ifup ifup %{_libexecdir}/nm-ifup 50 \
        --slave %{_sbindir}/ifdown ifdown %{_libexecdir}/nm-ifdown
 fi
 %endif
 %if %{with nm_cloud_setup}
@ -1026,10 +1062,12 @@ fi
 %systemd_preun NetworkManager-wait-online.service NetworkManager-dispatcher.service nm-priv-helper.service
 %if %{?with_ifcfg_rh}
 %preun initscripts-updown
 if [ $1 -eq 0 ]; then
    /usr/sbin/update-alternatives --remove ifup %{_libexecdir}/nm-ifup >/dev/null 2>&1 || :
 fi
 %endif
 %if %{with nm_cloud_setup}
@ -1064,7 +1102,7 @@ fi
 %{dbus_sys_dir}/org.freedesktop.NetworkManager.conf
 %{dbus_sys_dir}/nm-dispatcher.conf
 %{dbus_sys_dir}/nm-priv-helper.conf
-%if 0%{?split_ifcfg_rh} == 0
+%if %{?with_ifcfg_rh} && 0%{?split_ifcfg_rh} == 0
 %{dbus_sys_dir}/nm-ifcfg-rh.conf
 %endif
 %{_sbindir}/%{name}
@ -1092,7 +1130,7 @@ fi
 %{_libexecdir}/nm-priv-helper
 %dir %{_libdir}/%{name}
 %dir %{nmplugindir}
-%if 0%{?split_ifcfg_rh} == 0
+%if %{?with_ifcfg_rh} && 0%{?split_ifcfg_rh} == 0
 %{nmplugindir}/libnm-settings-plugin-ifcfg-rh.so
 %endif
 %if %{with nmtui}
@ -1114,7 +1152,9 @@ fi
 %{_mandir}/man8/NetworkManager-dispatcher.8*
 %{_mandir}/man8/NetworkManager-wait-online.service.8*
 %dir %{_localstatedir}/lib/NetworkManager
 %if %{?with_ifcfg_rh}
 %dir %{_sysconfdir}/sysconfig/network-scripts
 %endif
 %{_datadir}/dbus-1/system-services/org.freedesktop.nm_dispatcher.service
 %{_datadir}/dbus-1/system-services/org.freedesktop.nm_priv_helper.service
 %{_datadir}/polkit-1/actions/*.policy
@ -1229,11 +1269,12 @@ fi
 %{nmlibdir}/conf.d/00-server.conf
 %if %{?with_ifcfg_rh}
 %files dispatcher-routing-rules
 %{nmlibdir}/dispatcher.d/10-ifcfg-rh-routes.sh
 %{nmlibdir}/dispatcher.d/no-wait.d/10-ifcfg-rh-routes.sh
 %{nmlibdir}/dispatcher.d/pre-up.d/10-ifcfg-rh-routes.sh
-
+%endif
 %if %{with nmtui}
 %files tui
@ -1264,22 +1305,18 @@ fi
 %endif
 %if %{?with_ifcfg_rh}
 %files initscripts-updown
 %{_libexecdir}/nm-ifup
 %ghost %attr(755, root, root) %{_sbindir}/ifup
 %{_libexecdir}/nm-ifdown
 %ghost %attr(755, root, root) %{_sbindir}/ifdown
 %endif
 %changelog
-* Tue Nov 12 2024 Beniamino Galvani <bgalvani@redhat.com> - 1:1.48.10-3
+* Tue Nov 26 2024 MSVSphere Packaging Team <packager@msvsphere-os.ru> - 1:1.48.10-1
- Only validate the SR-IOV device capability when SR-IOV is enabled (RHEL-58397)
+- Rebuilt for MSVSphere 10
 - Fix bug when deactivating port connections (RHEL-50747)
 - Fix validation of ovs-dpdk interface name (RHEL-60022)
 * Fri Aug 30 2024 Fernando Fernandez Mancera <ferferna@redhat.com> - 1:1.48.10-2
 - cloud-setup: Allow bigger restart bursts (RHEL-56740)
 - cloud-setup: Fix Azure swap of primary and secondary IP addresses (RHEL-56387)
 * Thu Aug 22 2024 Íñigo Huguet <ihuguet@redhat.com> - 1:1.48.10-1
 - Unblock the autoconnect for children when parent is available (RHEL-46904)
@ -1287,15 +1324,8 @@ fi
 - Support reapplying bridge-port VLANs (RHEL-26750)
 - Add small backoff time before resync (RHEL-29902)
-* Fri Aug 09 2024 Fernando Fernandez Mancera <ferferna@redha.com> - 1:1.46.8-1
+* Fri Aug 09 2024 Fernando Fernandez Mancera <ferferna@redhat.com> - 1:1.48.8-1
 - Stop writing offensive terms into keyfiles (RHEL-52597)
 - Remove offensive words (RHEL-33368)
 - Fix cloned-mac-address race condition with DHCP on ovs-interfaces (RHEL-49796)
 * Fri Jul 26 2024 Fernando Fernandez Mancera <ferferna@redhat.com> - 1:1.48.6-1
 - Wait until link is ready before activating for ovs-interface (RHEL-49796)
 - Fix rollback on OVS checkpoint (RHEL-31972)
 - Assert that the auto-activate list is empty on dispose (RHEL-44345)
 * Fri Jul 05 2024 Stanislas Faye <sfaye@redhat.com> 1:1.48.4-1
 - Update to 1.48.4 release
@ -1304,13 +1334,12 @@ fi
  addresses configured on interfaces, NetworkManager now takes into
  account the content of /etc/hosts (RHEL-33435)
-* Thu Jun 27 2024 Íñigo Huguet <ihuguet@redhat.com> 1:1.48.2-2
+* Mon Jun 24 2024 Troy Dawson <tdawson@redhat.com> - 1:1.48.2-1.1
- Add ipcalc as dependency of NetworkManager-dispatcher-routing-rules (RHEL-36648)
+- Bump release for June 2024 mass rebuild
 * Mon Jun 24 2024 Beniamino Galvani <bgalvani@redhat.com> 1:1.48.2-1
 - Update to 1.48.2 release
 - Save connection timestamps when shutting down (RHEL-35539)
 - Fix regression with OpenVPN dynamic challenge (RHEL-43720)
 * Thu May 30 2024 Lubomir Rintel <lkundrak@v3.sk> - 1:1.48.0-1
 - Upgrade to 1.48.0 release
@ -1318,210 +1347,96 @@ fi
 * Thu May 16 2024 Lubomir Rintel <lkundrak@v3.sk> - 1:1.47.91-1
 - Upgrade to 1.47.91 (rc2)
 * Mon May 06 2024 Ján Václav <jvaclav@redhat.com> - 1:1.47.90-2
 - Use meson to build by default for RHEL 10 (from upstream)
 * Fri May 03 2024 Fernando Fernandez Mancera <ferferna@redhat.com> - 1:1.47.90-1
 - Upgrade to 1.47.90 (rc1)
-* Fri Apr 19 2024 Íñigo Huguet <ihuguet@redhat.com> - 1:1.47.5-1
+* Wed Apr 24 2024 Stanislas Faye <sfaye@redhat.com> - 1:1.47.5-2
- Fix a crash during shutdown (RHEL-29856)
+- Disable deprecated features (team, ifcfg-rh) on future RHEL versions
-
+
-* Fri Apr 05 2024 Fernando Fernandez Mancera <ferferna@redhat.com> - 1:1.47.4-1
+* Fri Apr 19 2024 Íñigo Huguet <ihuguet@redhat.com> - 1:1.47.4-1
- Fix LLDP support for interfaces attached to OVS bridges. (RHEL-1418)
+- Upgrade to 1.47.5 (development)
- Fix NMCI crashes on ovs_mtu and bond tests. (RHEL-30348)
+
-
+* Mon Apr 08 2024 Fernando Fernandez Mancera <ferferna@redhat.com> - 1:1.47.4-1
-* Wed Apr 03 2024 Fernando Fernandez Mancera <ferferna@redhat.com> - 1.47.3-2
+- Upgrade to 1.47.4 (development)
- Rebuild for CI gating
+
-
+* Mon Jan 22 2024 Fedora Release Engineering <releng@fedoraproject.org> - 1:1.45.9-1.2
-* Tue Mar 26 2024 Gris Ge <fge@redhat.com> - 1.47.3-1
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_40_Mass_Rebuild
- Upgrade to 1.47.3 release (development)
+
- Support rollback on global DNS (RHEL-23446)
+* Fri Jan 19 2024 Fedora Release Engineering <releng@fedoraproject.org> - 1:1.45.9-1.1
- Support VLAN over OVS interface which holds the same name as OVS bridge (RHEL-26753)
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_40_Mass_Rebuild
-
+
-* Fri Mar 08 2024 Íñigo Huguet <ihuguet@redhat.com>
+* Fri Dec 15 2023 Íñigo Huguet <ihuguet@redhat.com> - 1:1.45.9-1
- Update to 1.47.2 release (development)
+- Update to 1.45.9 release (development)
- Support sending DHCPRELEASE (RHEL-17310)
+- Dropped the support to build with Python 2
-
+
-* Thu Feb 22 2024 Stanislas FAYE <sfaye@redhat.com>
+* Thu Nov  2 2023 Íñigo Huguet <ihuguet@redhat.com> - 1:1.44.2-2
- Update to 1.46.0 release
+- migrated to SPDX license
- Fix DHCPv4 lease can't be renewed after it expires (RHEL-24127)
+
- Support the MACsec offload mode (RHEL-24337)
+* Tue Oct  3 2023 Beniamino Galvani <bgalvani@redhat.com> - 1:1.44.2-1
- Support creating generic devices via external "device-handler" dispatcher (RHEL-1567)
+- Update to 1.44.2 release
- Support changing the eswitch mode (RHEL-1441)
+
-
+* Thu Aug 10 2023 Beniamino Galvani <bgalvani@redhat.com> - 1:1.44.0-1
-* Fri Feb 09 2024 Íñigo Huguet <ihuguet@redhat.com> - 1.45.91-1
+- Update to 1.44.0 release
- Update to 1.45.91 release (release candidate)
+- Enable automatic migration of ifcfg profiles to keyfile:
- Support changing the DSCP header field for DHCP packets, and set the default to CS0 (RHEL-16040)
+  https://fedoraproject.org/wiki/Changes/MigrateIfcfgToKeyfile
- Deprecate connection.autoconnect-slaves in favour of autoconnect-ports (RHEL-17621)
+
- Don't reset bridge's PVID in reapply if it didn't change (RHEL-21576)
+* Fri Jul 28 2023 Beniamino Galvani <bgalvani@redhat.com> - 1:1.43.90-1
-
+- Update to 1.44-rc1 (1.43.90) (release candidate)
-* Thu Jan 25 2024 Stanislas FAYE <sfaye@redhat.com> - 1.45.90-1
+
- Update to 1.45.90 release (release candidate)
+* Wed Jul 19 2023 Fedora Release Engineering <releng@fedoraproject.org> - 1:1.43.10-1.1
- Deprecate and Replace connection.slave-type in libnm-core and libnm (RHEL-17620)
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_39_Mass_Rebuild
 - [RFE] Support assigning IPv4 static route to interface without IPv4 address (RHEL-5098)
 * Mon Jan 15 2024 Stanislas FAYE <sfaye@redhat.com> - 1.45.10-1
 - Update to 1.45.10 (development)
 - Deprecate and Replace connection.master in libnm-core and libnm (RHEL-17619)
 * Thu Dec 14 2023 Ján Václav <jvaclav@redhat.com> - 1.45.9-1
 - Update to 1.45.9 (development)
 - Add support for PRP/HSR interface (RHEL-5852)
 - Drop support for the 'slaves-order' option in NetworkManager.conf (RHEL-19437)
 - Return error when setting invalid IP addresses or properties via D-Bus (RHEL-19315)
 - Fix extra route being created besides ECMP route (RHEL-1682)
 * Wed Nov 29 2023 Beniamino Galvani <bgalvani@redhat.com> - 1.45.8-1
 - Update to 1.45.8 (development)
 - Introduce "stable-ssid" option for wifi.cloned-mac-address property (RHEL-16470)
 * Thu Nov 16 2023 Íñigo Huguet <ihuguet@redhat.com> - 1.45.7-1
 - Update to 1.45.7 release (development)
 - Migrate to SPDX license
 * Wed Nov  1 2023 Beniamino Galvani <bgalvani@redhat.com> - 1.45.6-1
 - Update to 1.45.6 release (development)
 - Fix ovs activation with netdev datapath and cloned MAC (RHEL-5886)
 * Wed Oct 18 2023 Íñigo Huguet <ihuguet@redhat.com> - 1.45.5-1
 - Update to 1.45.5 release (development)
 - Various fixes to Duplicate Address Detection (DAD) (RHEL-1581, RHEL-1411)
 - New option to avoid sending the DHCPv4 client-identifier (RHEL-1469)
 - Support setting channels in ethtool options (RHEL-1471)
 * Wed Oct 04 2023 Íñigo Huguet <ihuguet@redhat.com> - 1.45.4-1
 - Update to 1.45.4 release (development)
 - Add 'dns-change' dispatcher event (RHEL-1671)
 * Fri Sep 22 2023 Beniamino Galvani <bgalvani@redhat.com> - 1.45.3-1
 - Update to 1.45.3 release (development)
 - Improve explanation of the format and routes properties in keyfile man page (RHEL-1407)
 - Improve nm-settings-nmcli manpage to show format and valid values of properties (RHEL-2465)
 - Honor the autoactivate priority for port connections (RHEL-2202)
 - Properly document valid values for ip-tunnel properties (RHEL-1459)
 * Wed Sep  6 2023 Beniamino Galvani <bgalvani@redhat.com> - 1.45.2-1
 - update to 1.45.2 release (development)
 * Mon Sep 04 2023 Gris Ge <fge@redhat.com> - 1.44.0-4
 - Rebuild for RHEL 9.4
 * Wed Aug 30 2023 Fernando Fernandez Mancera <ferferna@redhat.com> - 1:1.44.0-3 
 - checkpoint: Fix segfault crash when rollback (rhel-1526)
 * Wed Aug 23 2023 Fernando Fernandez Mancera <ferferna@redhat.com> - 1:1.44.0-2
 - manager: ensure device is exported on D-Bus in authentication request (rh #2210271)
 * Thu Aug 10 2023 Fernando Fernandez Mancera <ferferna@redhat.com> - 1:1.44.0-1
 - update to 1.44.0 release
 - nmcli: add nmcli version mismatch warning (rh #2173196)
 - checkpoint: preserve devices that were removed and readded (rh #2177590)
 * Wed Jul 26 2023 Wen Liang <wenliang@redhat.com> - 1:1.43.90-1
 - update to 1.43.90 release (release candidate)
 - manager: allow controller activation if device is deactivating (rh #2125615)
 - assume: change IPv6 method from "ignore" and "disabled" into "auto" for loopback device (rh #2207878)
 - device: delete software device when lose carrier and is controller (rh #2224479)
 - core: better handle ignore-carrier=no for bond/bridge/team devices (rh #2180363)
 * Wed Jul 12 2023 Beniamino Galvani <bgalvani@redhat.com> - 1:1.43.11-1
 - update to 1.43.11 release (development)
 - fix assertion about missing ifindex when resetting MAC (rh #2215022)
 - fix wrong order of entries in resolv.conf after reconnect (rh #2218448)
 - do not fail activation when SR-IOV VF parameters can't be applied (rh #2210164)
 - warn that the ifcfg-rh plugin is deprecated (rh #2190375)
 * Wed Jun 14 2023 Thomas Haller <thaller@redhat.com> - 1:1.43.10-1
 - Update to 1.43.10 release (development)
- fix reading infiniband p-key from ifcfg files (rh #2209974)
+
- improve autoconnect when selecting controller (rh #2121451)
+* Wed May 17 2023 Beniamino Galvani <bgalvani@redhat.com> - 1:1.43.8-1
 - fix managing devices after network reconnect (rh #2149012)
 - better handle ignore-carrier for bond/bridge/team (rh #2180363)
 - cloud-setup: block wait-online while configuration is ongoing (rh #2151040)
 - cloud-setup: avoid leaving half configured system (rh #2207812)
 - cloud-setup: log warning when no provider detected (rh #2214880)
 - cloud-setup: fix RPM description (rh #2214491)
 * Wed May 31 2023 Thomas Haller <thaller@redhat.com> - 1:1.43.9-1
 - Update to 1.43.9 release (development)
 - improve autoconnect logic for port/controller configurations (rh #2121451)
 - fix handling external devices during network off/on (rh #2149012)
 * Tue May 16 2023 Beniamino Galvani <bgalvani@redhat.com> - 1:1.43.8-1
 - Update to 1.43.8 release (development)
 - ipv6ll: don't regenerate the address when it's removed externally (rh #2196441)
-* Wed May  3 2023 Thomas Haller <thaller@redhat.com> - 1:1.43.7-1
+* Thu May  4 2023 Thomas Haller <thaller@redhat.com> - 1:1.43.7-1
 - Update to 1.43.7 release (development)
 - bond: support port priorities (rh #2152304)
 - ovs: fix autoconnect race (rh #2152864)
-* Wed Apr 19 2023 Beniamino Galvani <bgalvani@redhat.com> - 1:1.43.6-1
+* Thu Apr 20 2023 Beniamino Galvani <bgalvani@redhat.com> - 1:1.43.6-1
 - Update to 1.43.6 release (development)
 - fix assertion failure when renewing DHCP lease (rh #2179890)
 - emit the dhcp-change dispatcher script event on lease renewal (rh #2179537)
 - ensure the NetworkManager is restarted when dbus is restarted (rh #2161915)
 - add support for the "no-aaaa" resolv.conf option (rh #2176137)                                                                                                              -
-* Wed Apr 05 2023 Lubomir Rintel <lkundrak@v3.sk> - 1:1.43.5-1
+* Tue Apr 18 2023 Adam Williamson <awilliam@redhat.com> - 1:1.43.5-3
 - Fix ppp version discovery
 * Tue Apr 18 2023 Adam Williamson <awilliam@redhat.com> - 1:1.43.5-2
 - Rebuild for ppp 2.5.0
 * Wed Apr  5 2023 Lubomir Rintel <lkundrak@v3.sk> - 1:1.43.5-1
 - Update to 1.43.5 release (development)
 - cloud-init/ec2: use right HTTP method for IMDSv2 (rh #2179718)
 - core: request a bus name only when dbus objects are present (rh #2175919)
 - core: fix autoconnect retry count tracking (rh #2174353)
 - core: fix retry on netlink socket buffer exhaustion (rh #2169512)
 - ovs: fix a race condition on port detachment (rh #2054933)
 * Wed Mar 22 2023 Thomas Haller <thaller@redhat.com> - 1:1.43.4-1
 - Update to 1.43.4 release (development)
 - core: fix handling of IPv4 prefsrc routes with ACD (rh #2046293)
 - core: don't configure static routes without addresses (rh #2102212)
 - core: fix race activating VLAN devices (rh #2155991)
-* Thu Mar 09 2023 Lubomir Rintel <lkundrak@v3.sk> - 1:1.43.3-1
+* Wed Mar  8 2023 Lubomir Rintel <lkundrak@v3.sk> - 1:1.43.3-1
 - Update to an early 1.44 snapshot
 - cloud-setup: add IDMSv2 support (rh #2151986)
 - core: add [link] setting (rh #2158328)
 - dhcp: expose client ID, DUID and IAID that have been used (rh #2169869)
 - ovs: ensure device has a proper MAC address once we start dhcp (rh #2168477)
 - team: fix assumption of team port management (rh #2092215)
 * Thu Feb 23 2023 Beniamino Galvani <bgalvani@redhat.com> - 1:1.42.2-1
 - Update to 1.42.2 release
 - fix hostname lookup from IPv6 address (rh #2167816)
 - add new connection property to remove the autogenerated local route rule (rh #2167805)
 - fix race condition while setting the MAC of a OVS interface (rh #2168477)
 - expose the DHCP IAID in the lease information (rh #2169869)                                                                               
 * Fri Feb 10 2023 Thomas Haller <thaller@redhat.com> - 1:1.42.0-1
- Update to 1.42.0 release
+- Upgrade to 1.42.0 release
 * Thu Jan 26 2023 Lubomir Rintel <lkundrak@v3.sk> - 1:1.41.91-1
 - Update to 1.41.91 release (release candidate)
 - core: retry if a rtnetlink socket runs out of buffer space (rh #2154350)
 - dns: allow changing resolv.conf options alone via global-dns (rh #2019306)
-* Fri Jan 20 2023 Fernando Fernandez Mancera <ferferna@redhat.com> - 1:1.41.90-1
+* Fri Jan 20 2023 Fernando Fernandez Mancera <ffmancera@riseup.net> - 1:1.41.90-1
- Update to 1.41.90 release (release candidate)
+- Update to 1.42-rc1 (1.41.90) (release candidate)
- l3cfg: schedule an update after every commit-type/config-data register/unregister (rh #2158394)
+- Upstream sync specfile
 - all: add support for ovs-dpdk n-rxq-desc and n-txq-desc (rh #2156385)
 - core: fix consistency for internal cache for IPv6 routes (rh #2060684)
-* Wed Jan 11 2023 Beniamino Galvani <bgalvani@redhat.com> - 1:1.41.8-1
+* Wed Jan 18 2023 Fedora Release Engineering <releng@fedoraproject.org> - 1:1.41.8-1.1
- Update to 1.41.8 release (development)
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_38_Mass_Rebuild
 - core: add support for equal-cost multi-path (ECMP) routes (rh #2081302)
 - device: preserve the DHCP lease during reapply (rh #2117352)
 - ovs: add support for 'other_config' settings (rh #2151455)
-* Wed Dec 21 2022 Thomas Haller <thaller@redhat.com> - 1:1.41.7-2
+* Mon Jan 16 2023 Beniamino Galvani <bgalvani@redhat.com> - 1:1.41.8-1
- core: avoid infinite autoconnect with multi-connect profiles (rh #2150000)
+- Update to 1.41.8 release (development)
 * Thu Dec 15 2022 Lubomir Rintel <lkundrak@v3.sk> - 1:1.41.7-1
 - Update to 1.41.7 release (development)
 - macsec: fix tracking of parent ifindex (rh #2122564)
 - cloud-setup: set preserve-external-ip flag during reapply (rh #2132754)
 * Wed Nov 30 2022 Thomas Haller <thaller@redhat.com> - 1:1.41.6-1
 - Update to 1.41.6 release (development)
 - add support for loopback interfaces (rh #2073512)
 - ovs: support VLAN trunks for OVS port (rh #2111959)
 * Fri Nov 18 2022 Thomas Haller <thaller@redhat.com> - 1:1.41.5-1
 - Update to 1.41.5 release (development)
@ -1530,210 +1445,133 @@ fi
 - fix generating stable UUIDs for keyfile (gitlab#1130)
 * Wed Nov  2 2022 Wen Liang <wenliang@redhat.com> - 1:1.41.4-1
- Update to 1.41.4 release (development)
+- Upgrade to 1.41.4 release
 - device: don't emit recheck-assume if there is a queued activation request (rh #2092215)
 - device: allow configuration of VLAN on an unmanaged interface (rh #2110307)
-* Fri Oct 14 2022 Beniamino Galvani <bgalvani@redhat.com> - 1:1.41.3-1
+* Tue Oct 18 2022 Beniamino Galvani <bgalvani@redhat.com> - 1:1.41.3-1
- Update to 1.41.3 release (development)
+- Upgrade to 1.41.3 release
 - core: fix reapply of mptcp-flags (rh #2120471)
 - core: fix autoconnection for devices with a unrealized parent (rh #2101317)
 - device: fix hanging port devices when controller goes down (rh #2130287)
 - bond: add "balance-slb" option which implements source load balancing (rh #2128216)
 - bond: fix setting primary option when the interface is missing (rh #2126347)
-* Fri Aug 26 2022 Ana Cabral <acabral@redhat.com> - 1:1.40.0-1
+* Fri Aug 26 2022 Thomas Haller <thaller@redhat.com> - 1:1.40.0-1
- Update to 1.40.0 release
+- Upgrade to 1.40.0 release
 * Tue Aug 16 2022 Ana Cabral <acabral@redhat.com> - 1:1.39.90-1
- Update to 1.39.90 release (release candidate)
+- Upgrade to 1.40-rc1 (1.39.90) (release candidate)
- Add support for MPTCP (rh #2029636)
+- Upstream sync
 - nmcli: fix assertion failure (rh #2092323)
 - bond: fix arp_ip_target option (rh #2117202)
 - nmci: fix test restart_L2_only_lacp (rh #2092361)
 * Fri Jul 29 2022 Lubomir Rintel <lkundrak@v3.sk> - 1:1.39.12-1
 - Update to 1.39.12 release (development)
 - bridge: fix reapply support (rh #2092762)
 * Thu Jul 28 2022 Beniamino Galvani <bgalvani@redhat.com> - 1:1.39.11-1
 - Update to 1.39.11 release (development)
- core: support nm.debug kernel command line option (rh #2102313)
+
- ovs: don't ever move unactivated devices to failed state (rh #2077950)
+* Wed Jul 20 2022 Fedora Release Engineering <releng@fedoraproject.org> - 1:1.39.10-1.1
- dhclient: fix EXTENDED DHCP event handling (rh #2109285)
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_37_Mass_Rebuild
 - core: make "nmcli net off/on" more robust (rh #2093175)
 - bridge: add reapply support (rh #2092762)
 - bridge: don't reset vlan filtering on external connections (rh #2107647)
 * Thu Jul 14 2022 Vojtech Bubela <vbubela@redhat.com> - 1:1.39.10-1
 - Update to 1.39.10 release (development)
 - add support for {rto_min,quickack,advmss} route attributes (rh #2068525)
 - fix empty hostname for "SaveHostname" and make setting hostname async (rh #2090946)
 * Thu Jun 30 2022 Lubomir Rintel <lkundrak@v3.sk> - 1:1.39.8-1
 - Update to 1.39.8 release (development)
- core: make ipv6.addr-gen-mode default configurable (rh #1743161) (rh #2082682)
+
- dhcpv6: finish DAD before considering a lease to be good (rh #2096386)
+* Mon May 30 2022 Ana Cabral <acabral@redhat.com> - 1:1.38.0-2
- core: add connection.wait-activation-delay property (rh #2008337)
+- rpm: include an informational file in ifcfg files directory
-
+
-* Thu Jun 16 2022 Thomas Haller <thaller@redhat.com> - 1:1.39.7-2
+* Fri May 13 2022 Thomas Haller <thaller@redhat.com> - 1:1.38.0-1
- fix priority of IPv6 addresses to prefer manual over DHCPv6 over SLAAC (rh #2097293)
+- Upgrade to 1.38.0 release
- reverse order of priority for static IPv6 addresses in "ipv6.addresses" (rh #2097293)
+
-
+* Wed May  4 2022 Thomas Haller <thaller@redhat.com> - 1:1.37.92-1
-* Wed Jun 15 2022 Lubomir Rintel <lkundrak@v3.sk> - 1:1.39.7-1
+- Upgrade to 1.38-rc3 (1.37.92) (release candidate)
- Update to 1.39.7 release (development)
+- core: change order in which IPv6 addresses are configured.
- core: cancel the IP check on deactivation (rh #2080928)
+
- core: ensure DHCP is restarted every time the link goes up (rh #2079406)
+* Thu Apr 14 2022 Thomas Haller <thaller@redhat.com> - 1:1.37.91-1
- core: fix a leak of L3 configuration memory (rh #2083453)
+- Upgrade to 1.38-rc2 (1.37.91) (release candidate)
- ppp: fix a race with pppd when removing addresses (rh #2085382)
+
- wifi: fix a crash when checking WEP supplicant capability (rh #2092782)
+* Wed Apr  6 2022 Ana Cabral <acabral@redhat.com> - 1:1.37.90-1
-
+- Upgrade to 1.38-rc1 (1.37.90) (release candidate)
 * Wed Jun  1 2022 Beniamino Galvani <bgalvani@redhat.com> - 1:1.39.6-1
 - Update to 1.39.6 release (development)
 - Implement ACD (address conflict detection) for DHCPv4 (rh #1713380)
 * Thu May 19 2022 Ana Cabral <acabral@redhat.com> - 1:1.39.5-1
 - Update to 1.39.5 release (development)
 - dhcp: fix ignoring addresses with DHCPv6 otherconf (O flag) (rh #2083968)
 - cloud-setup: reorder addresses to honor "primary_ip_address" (rh #2079849)
 * Wed May  4 2022 Wen Liang <wenliang@redhat.com> - 1:1.39.3-1
 - Update to 1.39.3 release (development)
 - l3cfg: drop NM_L3_CFG_COMMIT_TYPE_ASSUME and assume_config_once (rh #2050216)
 * Thu Apr 21 2022 Thomas Haller <thaller@redhat.com> - 1:1.39.2-1
 - Update to 1.39.2 release (development)
 - dhcp: set "src" attribute for DHCP routes (rh #1995372)
 - dhcp: drop internal DHCPv4 client based on systemd code (rh #2073067)
 - core: delay startup complete for DNS update (rh #2049421)
 - nmcli: support offline mode to create and edit keyfiles (rh #1361145)
 * Wed Apr 6 2022 Ana Cabral <acabral@redhat.com> - 1:1.39.0-1
 - Upgrade to 1.39.0 release (development)
 - Include a migration tool for ifcfg configuration to NM keyfiles
  (rh #2059608)
 * Thu Mar 24 2022 Lubomir Rintel <lkundrak@v3.sk> - 1:1.37.3-1
 - Upgrade to 1.37.3 release (development)
- core: allow reapply on autoconnect-slaves property change (rh #2065049)
+
- wifi: do not advertise channels outside regulatory domain (rh #2062785)
+* Tue Mar 22 2022 Beniamino Galvani <bgalvani@redhat.com> - 1:1.36.4-1
- wifi: warn about WEP being phased out (rh #2030997)
+- Update to 1.36.4 release
- bond: reject reapply when fail_over_mac was changed (rh #2003214)
+
-
+* Mon Mar  7 2022 Beniamino Galvani <bgalvani@redhat.com> - 1:1.36.2-1
-* Wed Mar  9 2022 Beniamino Galvani <bgalvani@redhat.com> - 1:1.37.2-1
+- Update to 1.36.2 release
- Upgrade to 1.37.2 release (development)
+- Split ifcfg-rh settings plugin into subpackage NetworkManager-initscripts-ifcfg-rh
 - core: preserve external ports during checkpoint rollback (rh #2061711)
 - core: fix ovs bridge deletion (rh #2061709)
 - core: shorten hostname when too long (rh #2033643)
 - nm-online: bump the timeout upper limit to 2073600 seconds (rh #2025617)
 - cloud-setup: fix crash when handling sigterm (rh #2027674)
 * Mon Feb 28 2022 Beniamino Galvani <bgalvani@redhat.com> - 1:1.36.0-2
 - core: fix setting DNS from WWAN and PPP (rh #2059138)
 * Thu Feb 24 2022 Lubomir Rintel <lkundrak@v3.sk> - 1:1.36.0-1
- Upgrade to 1.36.0 release
+- Update to 1.36.0 release
- core: avoid losing L3 configuration the second time it's applied (rh #2043514)
+
- ovs: avoid removing OVSDB entries on daemon shutdown (rh #2055665)
+* Sat Feb 19 2022 Lubomir Rintel <lkundrak@v3.sk> - 1:1.36.0-0.11
- nmcli: fix defaults for some properties on interactive add (rh #2053603)
+- Update to 1.36-rc3 (1.35.92) (release candidate)
-
+
-* Sat Feb 19 2022 Lubomir Rintel <lkundrak@v3.sk> - 1:1.36.0-0.10
+* Thu Feb 10 2022 Lubomir Rintel <lkundrak@v3.sk> - 1:1.36.0-0.10
- Upgrade to 1.35.92 (release candidate)
+- Update to 1.36-rc2 (1.35.91) (release candidate)
 - ppp: increase disconnect timeout (rh #2049596)
 - core: finish activation after all objects are committed (rh #2043133)
 - ipv6: add support for multipath routes (rh #1837254)
 - keyfile: do not write empty string list properties (rh #2022623)
 * Fri Feb 04 2022 Lubomir Rintel <lkundrak@v3.sk> - 1:1.36.0-0.9
- Upgrade to 1.35.91 release (release candidate)
+- Update to 1.36-rc1 (1.35.90) (release candidate)
- bond: fix duplicate IPv4 address detection (rh #2028751)
+
- core: add support for blackhole routes (rh #1937823) (rh #2013587)
+* Fri Jan 28 2022 Thomas Haller <thaller@redhat.com> - 1:1.36.0-0.8
- core: re-assess IP configuration if one IP family times out (rh #2051904)
+- update to an early 1.36 snapshot (1.35.7)
-
+
-* Fri Feb 04 2022 Lubomir Rintel <lkundrak@v3.sk> - 1:1.36.0-0.8
+* Thu Jan 27 2022 Thomas Haller <thaller@redhat.com> - 1:1.36.0-0.7
- Upgrade to 1.35.90 release (release candidate)
+- Revert rework of DHCP client that causes crash
 - ovs: remove ovsdb entry on interface removal (rh #2047302)
 - ovs: properly clean up devices on daemon shutdown (rh #2029937)
 - core: avoid losing addresses on handover from initrd to ral root (rh #2047302)
 - core: fix a possibe assertion failure in ACD (rh #2047788)
 * Fri Jan 28 2022 Thomas Haller <thaller@redhat.com> - 1:1.36.0-0.7
 - Upgrade to 1.35.7 release (development)
 - core: fix crash related to DHCPv6 leases (rh #2028849)
 - wifi: fix stale ActiveAccessPoint in D-Bus (rh #1983735)
 - libnm: fix dangling pointer in NMObject (rh #2039331)
 * Wed Jan 26 2022 Thomas Haller <thaller@redhat.com> - 1:1.36.0-0.6
- Upgrade to 1.35.6 release (development)
+- update to an early 1.36 snapshot (1.35.6)
- Move ifup/ifdown scripts to new NetworkManager-initscripts-updown package (rh #2022418)
+- Move ifup/ifdown scripts to new NetworkManager-initscripts-updown package
- wwan: fix assertion failure in modem/ppp code (rh #2028385)
+
- core: fix performance regression with 500vlans test (rh #2028849)
+* Wed Jan 19 2022 Fedora Release Engineering <releng@fedoraproject.org> - 1:1.36.0-0.4.1
- core: drop defective BPF filter for netlink sockets that caused hangs (rh #2037411)
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild
- initrd: add support for rd.znet_ifnames (rh #1980387)
+
-
+* Thu Jan 13 2022 Thomas Haller <thaller@redhat.com> - 1:1.36.0-0.4
-* Thu Jan 20 2022 Thomas Haller <thaller@redhat.com> - 1:1.36.0-0.5
+- update to an early 1.36 snapshot (1.35.4)
 - generate docs during build instead of using pre-generated (rh #2042875)
 * Wed Jan 12 2022 Wen Liang <wenliang@redhat.com> - 1:1.36.0-0.4
 - Upgrade to 1.35.4 release (development)
 - core: don't reset assume state if the device is unmanaged by parent (rh #2012182)
 - nm-device: clean up IP methods if we lose ifindex (rh #2012934)
 - core: log variant properties in connection diff (rh #2034086)
 * Thu Dec 16 2021 Wen Liang <wenliang@redhat.com> - 1:1.36.0-0.3
- Upgrade to 1.35.3 release (development)
+- update to an early 1.36 snapshot (1.35.3)
 - device: fix update of the ip-iface property (rh #2026024)
-* Wed Dec  1 2021 Wen Liang <wenliang@redhat.com> - 1:1.36.0-0.2
+* Thu Dec  2 2021 Wen Liang <wenliang@redhat.com> - 1:1.36.0-0.2
- Upgrade to 1.35.2 release (development)
+- update to an early 1.36 snapshot (1.35.2)
-* Thu Nov 18 2021 Beniamino Galvani <bgalvani@redhat.com> - 1:1.36.0-0.1
+* Fri Nov 19 2021 Beniamino Galvani <bgalvani@redhat.com> - 1:1.36.0-0.1
- Upgrade to 1.35.1 release (development)
+- update to an early 1.36 snapshot (1.35.1)
-* Fri Sep 24 2021 Ana Cabral <acabral@redhat.com> - 1:1.34.0-0.1
+* Fri Oct 29 2021 Beniamino Galvani <bgalvani@redhat.com> - 1:1.32.12-2
- Upgrade to 1.33.3 release (development) (rh #1996582)
+- better handle systemd-resolved errors when resolving hostnames
 - Add support of queue_id of bond port (rh #1949127)
-* Thu Aug 19 2021 Wen Liang <wenliang@redhat.com> - 1:1.32.10-2
+* Wed Sep 22 2021 Beniamino Galvani <bgalvani@redhat.com> - 1:1.32.12-1
- platform: fix capturing IPv4 addresses from platform for assuming after restart
+- update to 1.32.12 release
-* Thu Aug 19 2021 Wen Liang <wenliang@redhat.com> - 1:1.32.10-1
+* Thu Aug 19 2021 Thomas Haller <thaller@redhat.com> - 1:1.32.10-2
- Upgrade to 1.32.10 release
+- platform: fix capturing IPv4 addresses from platform for assuming after restart
-* Tue Aug 10 2021 Fernando Fernandez Mancera <ferferna@redhat.com> - 1:1.32.8-1
+* Thu Aug 19 2021 Wen Liang <liangwen12year@gmail.com> - 1:1.32.10-1
- Upgrade to 1.32.8 release
+- update to 1.32.10 release
-* Mon Aug 09 2021 Mohan Boddu <mboddu@redhat.com> - 1:1.32.6-1.1
+* Tue Aug 10 2021 Fernando Fernandez Mancera <ffmancera@riseup.net> - 1:1.32.8-1
- Rebuilt for IMA sigs, glibc 2.34, aarch64 flags
+- update to 1.32.8 release
  Related: rhbz#1991688
-* Fri Jul 30 2021 Gris Ge <fge@redhat.com> - 1:1.32.6-1
+* Wed Jul 28 2021 Thomas Haller <thaller@redhat.com> - 1:1.32.6-1
- Upgrade to 1.32.6 release
+- update to 1.32.6 release
-* Tue Jul 27 2021 Gris Ge <fge@redhat.com> - 1:1.32.4-1
+* Wed Jul 21 2021 Fedora Release Engineering <releng@fedoraproject.org> - 1:1.32.4-1.1
- Upgrade to 1.32.4 release
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_35_Mass_Rebuild
 - core/wwan: avoid assertion failure in modem_ip{4,6}_config_result() (rh #1916192)
 - bond: support the peer_notif_delay option (rh #1963854)
-* Thu Jul  1 2021 Wen Liang <wenliang@redhat.com> - 1:1.32.2-1
+* Tue Jul 20 2021 Thomas Haller <thaller@redhat.com> - 1:1.32.4-1
- update to 1.32.2 release
+- update to 1.32.4 release
- dhcp/systemd: ignore FORCERENEW requests for DHCPV4 (rh #1966123, CVE-2020-13529)
+- default to "nftables" firewall-backend for shared mode.
-* Fri Jun 18 2021 Wen Liang <wenliang@redhat.com> - 1:1.32.0-1
+* Wed Jun 16 2021 Thomas Haller <thaller@redhat.com> - 1:1.32.0-1
 - update to 1.32.0 release
- DNS: fix lookup of hostname via DNS (rh #1956319)
+- default to "iptables" firewall-backend due to SELinux bug rh #1972911.
- initrd: fix crash parsing empty rd.znet argument (rh #1931284)
+
- fix the connection unauthenticated via insecure defaults (rh #1910627, CVE-2020-10754)
+* Fri Jun  4 2021 Thomas Haller <thaller@redhat.com> - 1:1.32.0-0.4
- fix NetworkManager crash when setting 'match.path' and activating a profile (rh #1944977, CVE-2021-20297)
+- update to 1.32-rc1 (1.31.90) (release candidate)
-
+
-* Mon Jun  7 2021 Wen Liang <wenliang@redhat.com> - 1:1.32.0-0.1
+* Wed May  5 2021 Beniamino Galvani <bgalvani@redhat.com> - 1:1.32.0-0.3
- Update to 1.31.5 (development)
+- update to an early 1.32 snapshot (1.31.4)
- build: install D-Bus service files to '/usr' by default (rh #1969428)
+
- ethtool: introduce PAUSE support (rh #1959261)
+* Fri Apr 23 2021 Beniamino Galvani <bgalvani@redhat.com> - 1:1.32.0-0.2
- resolve conflicts in NetworkManager-libnm-devel multilib packages (rh #1915254)
+- update to an early 1.32 snapshot (1.31.3)
-
+
-* Thu Apr 15 2021 Mohan Boddu <mboddu@redhat.com> - 1:1.30.2-1.1
+* Thu Mar 25 2021 Beniamino Galvani <bgalvani@redhat.com> - 1:1.32.0-0.1
- Rebuilt for RHEL 9 BETA on Apr 15th 2021. Related: rhbz#1947937
+- update to an early 1.32 snapshot (1.31.2)
 * Fri Mar 12 2021 Beniamino Galvani <bgalvani@redhat.com> - 1:1.30.2-1
 - update to 1.30.2 release