diff --git a/SOURCES/xfsprogs-5.10.0-xfs_repair-fix-progress-reporting.patch b/SOURCES/xfsprogs-5.10.0-xfs_repair-fix-progress-reporting.patch new file mode 100644 index 0000000..409a798 --- /dev/null +++ b/SOURCES/xfsprogs-5.10.0-xfs_repair-fix-progress-reporting.patch @@ -0,0 +1,177 @@ +From a4d94d6c30acac66ff82e740e2dcb95736d7d195 Mon Sep 17 00:00:00 2001 +From: Eric Sandeen +Date: Tue, 26 May 2020 14:36:04 -0400 +Subject: [PATCH] xfs_repair: fix progress reporting + +The Fixes: commit tried to avoid a segfault in case the progress timer +went off before the first message type had been set up, but this +had the net effect of short-circuiting the pthread start routine, +and so the timer didn't get set up at all and we lost all fine-grained +progress reporting. + +The initial problem occurred when log zeroing took more time than the +timer interval. + +So, make a new log zeroing progress item and initialize it when we first +set up the timer thread, to be sure that if the timer goes off while we +are still zeroing the log, it will be initialized and correct. + +(We can't offer fine-grained status on log zeroing, so it'll go from +zero to $LOGBLOCKS with nothing in between, but it's unlikely that log +zeroing will take so long that this really matters.) + +Reported-by: Leonardo Vaz +Fixes: 7f2d6b811755 ("xfs_repair: avoid segfault if reporting progre...") +Signed-off-by: Eric Sandeen +Reviewed-by: Darrick J. Wong +Reviewed-by: Donald Douwsma +Signed-off-by: Eric Sandeen +Signed-off-by: Pavel Reichl +--- + repair/phase2.c | 6 ++++++ + repair/progress.c | 35 +++++++++++++++++++---------------- + repair/progress.h | 31 ++++++++++++++++--------------- + 3 files changed, 41 insertions(+), 31 deletions(-) + +diff --git a/repair/phase2.c b/repair/phase2.c +index 40ea2f84..952ac4a5 100644 +--- a/repair/phase2.c ++++ b/repair/phase2.c +@@ -120,6 +120,9 @@ zero_log( + do_error(_("failed to clear log")); + } + ++ /* And we are now magically complete! */ ++ PROG_RPT_INC(prog_rpt_done[0], mp->m_sb.sb_logblocks); ++ + /* + * Finally, seed the max LSN from the current state of the log if this + * is a v5 filesystem. +@@ -160,7 +163,10 @@ phase2( + + /* Zero log if applicable */ + do_log(_(" - zero log...\n")); ++ ++ set_progress_msg(PROG_FMT_ZERO_LOG, (uint64_t)mp->m_sb.sb_logblocks); + zero_log(mp); ++ print_final_rpt(); + + do_log(_(" - scan filesystem freespace and inode maps...\n")); + +diff --git a/repair/progress.c b/repair/progress.c +index 5ee08229..e5a9c1ef 100644 +--- a/repair/progress.c ++++ b/repair/progress.c +@@ -49,35 +49,37 @@ typedef struct progress_rpt_s { + + static + progress_rpt_t progress_rpt_reports[] = { +-{FMT1, N_("scanning filesystem freespace"), /* 0 */ ++{FMT1, N_("zeroing log"), /* 0 */ ++ &rpt_fmts[FMT1], &rpt_types[TYPE_BLOCK]}, ++{FMT1, N_("scanning filesystem freespace"), /* 1 */ + &rpt_fmts[FMT1], &rpt_types[TYPE_AG]}, +-{FMT1, N_("scanning agi unlinked lists"), /* 1 */ ++{FMT1, N_("scanning agi unlinked lists"), /* 2 */ + &rpt_fmts[FMT1], &rpt_types[TYPE_AG]}, +-{FMT2, N_("check uncertain AG inodes"), /* 2 */ ++{FMT2, N_("check uncertain AG inodes"), /* 3 */ + &rpt_fmts[FMT2], &rpt_types[TYPE_AGI_BUCKET]}, +-{FMT1, N_("process known inodes and inode discovery"), /* 3 */ ++{FMT1, N_("process known inodes and inode discovery"), /* 4 */ + &rpt_fmts[FMT1], &rpt_types[TYPE_INODE]}, +-{FMT1, N_("process newly discovered inodes"), /* 4 */ ++{FMT1, N_("process newly discovered inodes"), /* 5 */ + &rpt_fmts[FMT1], &rpt_types[TYPE_AG]}, +-{FMT1, N_("setting up duplicate extent list"), /* 5 */ ++{FMT1, N_("setting up duplicate extent list"), /* 6 */ + &rpt_fmts[FMT1], &rpt_types[TYPE_AG]}, +-{FMT1, N_("initialize realtime bitmap"), /* 6 */ ++{FMT1, N_("initialize realtime bitmap"), /* 7 */ + &rpt_fmts[FMT1], &rpt_types[TYPE_BLOCK]}, +-{FMT1, N_("reset realtime bitmaps"), /* 7 */ ++{FMT1, N_("reset realtime bitmaps"), /* 8 */ + &rpt_fmts[FMT1], &rpt_types[TYPE_AG]}, +-{FMT1, N_("check for inodes claiming duplicate blocks"), /* 8 */ ++{FMT1, N_("check for inodes claiming duplicate blocks"), /* 9 */ + &rpt_fmts[FMT1], &rpt_types[TYPE_INODE]}, +-{FMT1, N_("rebuild AG headers and trees"), /* 9 */ ++{FMT1, N_("rebuild AG headers and trees"), /* 10 */ + &rpt_fmts[FMT1], &rpt_types[TYPE_AG]}, +-{FMT1, N_("traversing filesystem"), /* 10 */ ++{FMT1, N_("traversing filesystem"), /* 12 */ + &rpt_fmts[FMT1], &rpt_types[TYPE_AG]}, +-{FMT2, N_("traversing all unattached subtrees"), /* 11 */ ++{FMT2, N_("traversing all unattached subtrees"), /* 12 */ + &rpt_fmts[FMT2], &rpt_types[TYPE_DIR]}, +-{FMT2, N_("moving disconnected inodes to lost+found"), /* 12 */ ++{FMT2, N_("moving disconnected inodes to lost+found"), /* 13 */ + &rpt_fmts[FMT2], &rpt_types[TYPE_INODE]}, +-{FMT1, N_("verify and correct link counts"), /* 13 */ ++{FMT1, N_("verify and correct link counts"), /* 14 */ + &rpt_fmts[FMT1], &rpt_types[TYPE_AG]}, +-{FMT1, N_("verify link counts"), /* 14 */ ++{FMT1, N_("verify link counts"), /* 15 */ + &rpt_fmts[FMT1], &rpt_types[TYPE_AG]} + }; + +@@ -125,7 +127,8 @@ init_progress_rpt (void) + */ + + pthread_mutex_init(&global_msgs.mutex, NULL); +- global_msgs.format = NULL; ++ /* Make sure the format is set to the first phase and not NULL */ ++ global_msgs.format = &progress_rpt_reports[PROG_FMT_ZERO_LOG]; + global_msgs.count = glob_agcount; + global_msgs.interval = report_interval; + global_msgs.done = prog_rpt_done; +diff --git a/repair/progress.h b/repair/progress.h +index 9de9eb72..2c1690db 100644 +--- a/repair/progress.h ++++ b/repair/progress.h +@@ -8,26 +8,27 @@ + #define PHASE_END 1 + + +-#define PROG_FMT_SCAN_AG 0 /* Phase 2 */ ++#define PROG_FMT_ZERO_LOG 0 /* Phase 2 */ ++#define PROG_FMT_SCAN_AG 1 + +-#define PROG_FMT_AGI_UNLINKED 1 /* Phase 3 */ +-#define PROG_FMT_UNCERTAIN 2 +-#define PROG_FMT_PROCESS_INO 3 +-#define PROG_FMT_NEW_INODES 4 ++#define PROG_FMT_AGI_UNLINKED 2 /* Phase 3 */ ++#define PROG_FMT_UNCERTAIN 3 ++#define PROG_FMT_PROCESS_INO 4 ++#define PROG_FMT_NEW_INODES 5 + +-#define PROG_FMT_DUP_EXTENT 5 /* Phase 4 */ +-#define PROG_FMT_INIT_RTEXT 6 +-#define PROG_FMT_RESET_RTBM 7 +-#define PROG_FMT_DUP_BLOCKS 8 ++#define PROG_FMT_DUP_EXTENT 6 /* Phase 4 */ ++#define PROG_FMT_INIT_RTEXT 7 ++#define PROG_FMT_RESET_RTBM 8 ++#define PROG_FMT_DUP_BLOCKS 9 + +-#define PROG_FMT_REBUILD_AG 9 /* Phase 5 */ ++#define PROG_FMT_REBUILD_AG 10 /* Phase 5 */ + +-#define PROG_FMT_TRAVERSAL 10 /* Phase 6 */ +-#define PROG_FMT_TRAVERSSUB 11 +-#define PROG_FMT_DISCONINODE 12 ++#define PROG_FMT_TRAVERSAL 11 /* Phase 6 */ ++#define PROG_FMT_TRAVERSSUB 12 ++#define PROG_FMT_DISCONINODE 13 + +-#define PROGRESS_FMT_CORR_LINK 13 /* Phase 7 */ +-#define PROGRESS_FMT_VRFY_LINK 14 ++#define PROGRESS_FMT_CORR_LINK 14 /* Phase 7 */ ++#define PROGRESS_FMT_VRFY_LINK 15 + + #define DURATION_BUF_SIZE 512 + +-- +2.40.1 + diff --git a/SOURCES/xfsprogs-5.19.0-mkfs-terminate-getsubopt-arrays-properly.patch b/SOURCES/xfsprogs-5.19.0-mkfs-terminate-getsubopt-arrays-properly.patch new file mode 100644 index 0000000..e3f512a --- /dev/null +++ b/SOURCES/xfsprogs-5.19.0-mkfs-terminate-getsubopt-arrays-properly.patch @@ -0,0 +1,112 @@ +From 50dba8189b1f628073eb61d824ae8a8a1b43cefb Mon Sep 17 00:00:00 2001 +From: "Darrick J. Wong" +Date: Wed, 13 Jul 2022 20:58:28 -0500 +Subject: [PATCH] mkfs: terminate getsubopt arrays properly + +Having not drank any (or maybe too much) coffee this morning, I typed: + +$ mkfs.xfs -d agcount=3 -d nrext64=0 +Segmentation fault + +I traced this down to getsubopt walking off the end of the dopts.subopts +array. The manpage says you're supposed to terminate the suboptions +string array with a NULL entry, but the structure definition uses +MAX_SUBOPTS/D_MAX_OPTS directly, which means there is no terminator. + +Explicitly terminate each suboption array with a NULL entry after +making room for it. + +Signed-off-by: Darrick J. Wong +[sandeen: explicitly add NULL terminators & clarify comment] +Reviewed-by: Eric Sandeen +Signed-off-by: Eric Sandeen +Signed-off-by: Pavel Reichl +--- + mkfs/xfs_mkfs.c | 16 ++++++++++++++-- + 1 file changed, 14 insertions(+), 2 deletions(-) + +diff --git a/mkfs/xfs_mkfs.c b/mkfs/xfs_mkfs.c +index db322b3a..b140b815 100644 +--- a/mkfs/xfs_mkfs.c ++++ b/mkfs/xfs_mkfs.c +@@ -140,8 +140,11 @@ enum { + M_MAX_OPTS, + }; + +-/* Just define the max options array size manually right now */ +-#define MAX_SUBOPTS D_MAX_OPTS ++/* ++ * Just define the max options array size manually to the largest ++ * enum right now, leaving room for a NULL terminator at the end ++ */ ++#define MAX_SUBOPTS (D_MAX_OPTS + 1) + + #define SUBOPT_NEEDS_VAL (-1LL) + #define MAX_CONFLICTS 8 +@@ -251,6 +254,7 @@ static struct opt_params bopts = { + .name = 'b', + .subopts = { + [B_SIZE] = "size", ++ [B_MAX_OPTS] = NULL, + }, + .subopt_params = { + { .index = B_SIZE, +@@ -306,6 +311,7 @@ static struct opt_params dopts = { + [D_PROJINHERIT] = "projinherit", + [D_EXTSZINHERIT] = "extszinherit", + [D_COWEXTSIZE] = "cowextsize", ++ [D_MAX_OPTS] = NULL, + }, + .subopt_params = { + { .index = D_AGCOUNT, +@@ -443,6 +449,7 @@ static struct opt_params iopts = { + [I_ATTR] = "attr", + [I_PROJID32BIT] = "projid32bit", + [I_SPINODES] = "sparse", ++ [I_MAX_OPTS] = NULL, + }, + .subopt_params = { + { .index = I_ALIGN, +@@ -515,6 +522,7 @@ static struct opt_params lopts = { + [L_FILE] = "file", + [L_NAME] = "name", + [L_LAZYSBCNTR] = "lazy-count", ++ [L_MAX_OPTS] = NULL, + }, + .subopt_params = { + { .index = L_AGNUM, +@@ -607,6 +615,7 @@ static struct opt_params nopts = { + [N_SIZE] = "size", + [N_VERSION] = "version", + [N_FTYPE] = "ftype", ++ [N_MAX_OPTS] = NULL, + }, + .subopt_params = { + { .index = N_SIZE, +@@ -642,6 +651,7 @@ static struct opt_params ropts = { + [R_FILE] = "file", + [R_NAME] = "name", + [R_NOALIGN] = "noalign", ++ [R_MAX_OPTS] = NULL, + }, + .subopt_params = { + { .index = R_EXTSIZE, +@@ -689,6 +699,7 @@ static struct opt_params sopts = { + .subopts = { + [S_SIZE] = "size", + [S_SECTSIZE] = "sectsize", ++ [S_MAX_OPTS] = NULL, + }, + .subopt_params = { + { .index = S_SIZE, +@@ -725,6 +736,7 @@ static struct opt_params mopts = { + [M_REFLINK] = "reflink", + [M_INOBTCNT] = "inobtcount", + [M_BIGTIME] = "bigtime", ++ [M_MAX_OPTS] = NULL, + }, + .subopt_params = { + { .index = M_CRC, +-- +2.40.1 + diff --git a/SOURCES/xfsprogs-5.19.0-xfs_repair-ignore-empty-xattr-leaf-blocks.patch b/SOURCES/xfsprogs-5.19.0-xfs_repair-ignore-empty-xattr-leaf-blocks.patch new file mode 100644 index 0000000..fd9b3b0 --- /dev/null +++ b/SOURCES/xfsprogs-5.19.0-xfs_repair-ignore-empty-xattr-leaf-blocks.patch @@ -0,0 +1,56 @@ +From f50d3462c654acc484ab3ea68e75e8252b77e262 Mon Sep 17 00:00:00 2001 +From: "Darrick J. Wong" +Date: Wed, 13 Jul 2022 20:58:25 -0500 +Subject: [PATCH] xfs_repair: ignore empty xattr leaf blocks + +As detailed in the commit: + +5e572d1a xfs: empty xattr leaf header blocks are not corruption + +empty xattr leaf blocks can be the benign byproduct of the system +going down during the multi-step process of adding a large xattr +to a file that has no xattrs. If we find one at attr fork offset 0, +we should clear it, but this isn't a corruption. + +Signed-off-by: Darrick J. Wong +Reviewed-by: Dave Chinner +Signed-off-by: Eric Sandeen +Signed-off-by: Pavel Reichl +--- + repair/attr_repair.c | 20 ++++++++++++++++++++ + 1 file changed, 20 insertions(+) + +diff --git a/repair/attr_repair.c b/repair/attr_repair.c +index 2055d96e..c3a6d502 100644 +--- a/repair/attr_repair.c ++++ b/repair/attr_repair.c +@@ -579,6 +579,26 @@ process_leaf_attr_block( + firstb = mp->m_sb.sb_blocksize; + stop = xfs_attr3_leaf_hdr_size(leaf); + ++ /* ++ * Empty leaf blocks at offset zero can occur as a race between ++ * setxattr and the system going down, so we only take action if we're ++ * running in modify mode. See xfs_attr3_leaf_verify for details of ++ * how we've screwed this up many times. ++ */ ++ if (!leafhdr.count && da_bno == 0) { ++ if (no_modify) { ++ do_log( ++ _("would clear empty leaf attr block 0, inode %" PRIu64 "\n"), ++ ino); ++ return 0; ++ } ++ ++ do_warn( ++ _("will clear empty leaf attr block 0, inode %" PRIu64 "\n"), ++ ino); ++ return 1; ++ } ++ + /* does the count look sorta valid? */ + if (!leafhdr.count || + leafhdr.count * sizeof(xfs_attr_leaf_entry_t) + stop > +-- +2.40.1 + diff --git a/SOURCES/xfsprogs-rhelonly-mkfs-fix-man-s-default-value-for-sparse-option.patch b/SOURCES/xfsprogs-rhelonly-mkfs-fix-man-s-default-value-for-sparse-option.patch new file mode 100644 index 0000000..54c162f --- /dev/null +++ b/SOURCES/xfsprogs-rhelonly-mkfs-fix-man-s-default-value-for-sparse-option.patch @@ -0,0 +1,28 @@ +From 31980fef484df925b23824244de8ef353e436cef Mon Sep 17 00:00:00 2001 +From: Pavel Reichl +Date: Thu, 8 Jun 2023 10:57:52 +0200 +Subject: [PATCH] mkfs: fix man's default value for sparse option + +Fixes: 9cf846b51 ("mkfs: enable sparse inodes by default") +Suggested-by: Lukas Herbolt +Signed-off-by: Pavel Reichl +--- + man/man8/mkfs.xfs.8 | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/man/man8/mkfs.xfs.8 b/man/man8/mkfs.xfs.8 +index 49e64d47a..48e26ece7 100644 +--- a/man/man8/mkfs.xfs.8 ++++ b/man/man8/mkfs.xfs.8 +@@ -631,7 +631,7 @@ Enable sparse inode chunk allocation. The + .I value + is either 0 or 1, with 1 signifying that sparse allocation is enabled. + If the value is omitted, 1 is assumed. Sparse inode allocation is +-disabled by default. This feature is only available for filesystems ++enabled by default. This feature is only available for filesystems + formatted with + .B \-m crc=1. + .IP +-- +2.40.1 + diff --git a/SPECS/xfsprogs.spec b/SPECS/xfsprogs.spec index 9bc8e9d..11e4ef5 100644 --- a/SPECS/xfsprogs.spec +++ b/SPECS/xfsprogs.spec @@ -1,7 +1,7 @@ Summary: Utilities for managing the XFS filesystem Name: xfsprogs Version: 5.0.0 -Release: 11%{?dist} +Release: 12%{?dist} License: GPL+ and LGPLv2+ Group: System Environment/Base URL: https://xfs.wiki.kernel.org @@ -80,7 +80,11 @@ Patch59: xfsprogs-5.13.0-xfs-rename-struct-xfs_legacy_ictimestamp.patch Patch60: xfsprogs-5.11.0-mkfs-fix-wrong-inobtcount-usage-error-output.patch Patch61: xfsprogs-5.12.0-libxfs-expose-inobtcount-in-xfs-geometry.patch Patch62: xfsprogs-5.12.0-libfrog-report-inobtcount-in-geometry.patch -Patch63: xfsprogs-5.9.0-xfs-ignore-autofs-mount-table-entries.patch +Patch63: xfsprogs-5.19.0-xfs_repair-ignore-empty-xattr-leaf-blocks.patch +Patch64: xfsprogs-5.19.0-mkfs-terminate-getsubopt-arrays-properly.patch +Patch65: xfsprogs-5.9.0-xfs-ignore-autofs-mount-table-entries.patch +Patch66: xfsprogs-5.10.0-xfs_repair-fix-progress-reporting.patch +Patch67: xfsprogs-rhelonly-mkfs-fix-man-s-default-value-for-sparse-option.patch %description A set of commands to use the XFS filesystem, including mkfs.xfs. @@ -175,6 +179,10 @@ also want to install xfsprogs. %patch61 -p1 %patch62 -p1 %patch63 -p1 +%patch64 -p1 +%patch65 -p1 +%patch66 -p1 +%patch67 -p1 %build export tagname=CC @@ -234,11 +242,16 @@ rm -rf $RPM_BUILD_ROOT/%{_mandir}/man8/xfs_scrub* %{_libdir}/*.so %changelog -* Wed Jul 26 2023 MSVSphere Packaging Team - 5.0.0-11 +* Wed Jul 26 2023 MSVSphere Packaging Team - 5.0.0-12 - Rebuilt for MSVSphere 8.8 -* Fri May 19 2023 Pavel Reichl - 5.0.0-11 -- Fix ignore autofs mount table entries (#2208391) +* Thu Jun 08 2023 Pavel Reichl - 5.0.0-12 +- Fix xfs_repair progress reporting is not working (#2183398) +- Fix man page default for sparse mkfs option (#2118564) + +* Tue May 02 2023 Pavel Reichl - 5.0.0-11 +- Fix xfstest fails with error "missing xfsprogs fix patch"(#2161936,#2160746) +- Fix ignore autofs mount table entries (#2182361) * Thu Dec 09 2021 Bill O'Donnell 5.0.0-10 - xfsprogs: enable bigtime and inode btree counter features in RHEL8 (#2024201))