import postgresql-15.8-2.module_el9+1108+b05fe5f3

.gitignore

@@ -0,0 +1,4 @@
+SOURCES/postgresql-13.16.tar.bz2
+SOURCES/postgresql-15.8-US.pdf
+SOURCES/postgresql-15.8.tar.bz2
+SOURCES/postgresql-setup-8.8.tar.gz

.postgresql.metadata

@@ -0,0 +1,4 @@
+a2465d5086abb2b2ff9115541cae404f869dfa0f SOURCES/postgresql-13.16.tar.bz2
+25386701fcffa65a733f0225a58ea6231dc1808b SOURCES/postgresql-15.8-US.pdf
+4decf90a7557c41fc61312e8696f59e0f7123d2a SOURCES/postgresql-15.8.tar.bz2
+c5aa3e8b728c67b294815931c91c86aa61932bb5 SOURCES/postgresql-setup-8.8.tar.gz

SOURCES/Makefile.regress

@@ -0,0 +1,69 @@
+#
+# Simplified makefile for running the PostgreSQL regression tests
+# in an RPM installation
+#
+
+# maximum simultaneous connections for parallel tests
+MAXCONNOPT =
+ifdef MAX_CONNECTIONS
+MAXCONNOPT += --max-connections=$(MAX_CONNECTIONS)
+endif
+
+# locale
+NOLOCALE =
+ifdef NO_LOCALE
+NOLOCALE += --no-locale
+endif
+
+srcdir := .
+
+REGRESS_OPTS += --dlpath=.
+
+pg_regress_locale_flags = $(if $(ENCODING),--encoding=$(ENCODING)) $(NOLOCALE)
+
+pg_regress_installcheck = ./pg_regress --inputdir=$(srcdir) --bindir=@bindir@ $(pg_regress_locale_flags)
+
+# Test input and expected files.  These are created by pg_regress itself, so we
+# don't have a rule to create them.  We do need rules to clean them however.
+ifile_list := $(subst .source,, $(notdir $(wildcard $(srcdir)/input/*.source)))
+input_files  := $(foreach file, $(ifile_list), sql/$(file).sql)
+ofile_list := $(subst .source,, $(notdir $(wildcard $(srcdir)/output/*.source)))
+output_files := $(foreach file, $(ofile_list), expected/$(file).out)
+
+abs_srcdir := $(shell pwd)
+abs_builddir := $(shell pwd)
+
+check: installcheck-parallel
+
+installcheck: cleandirs
+	$(pg_regress_installcheck) $(REGRESS_OPTS) --schedule=$(srcdir)/serial_schedule $(EXTRA_TESTS)
+
+installcheck-parallel: cleandirs
+	$(pg_regress_installcheck) $(REGRESS_OPTS) --schedule=$(srcdir)/parallel_schedule $(MAXCONNOPT) $(EXTRA_TESTS)
+
+# The tests command the server to write into testtablespace and results.
+# On a SELinux-enabled system this will fail unless we mark those directories
+# as writable by the server.
+cleandirs:
+	-rm -rf testtablespace results
+	mkdir testtablespace results
+	if test -x /usr/bin/chcon && ! test -f /.dockerenv; then \
+	    /usr/bin/chcon -u system_u -r object_r -t postgresql_db_t testtablespace results ; \
+	fi
+
+# old interfaces follow...
+
+runcheck: check
+runtest: installcheck
+runtest-parallel: installcheck-parallel
+
+
+##
+## Clean up
+##
+
+clean distclean maintainer-clean:
+	rm -f $(output_files) $(input_files)
+	rm -rf testtablespace
+	rm -rf results tmp_check log
+	rm -f regression.diffs regression.out regress.out run_check.out

SOURCES/generate-pdf.sh

@@ -0,0 +1,58 @@
+#! /bin/sh
+
+# This script builds the PDF version of the PostgreSQL documentation.
+#
+# In principle we could do this as part of the RPM build, but there are
+# good reasons not to:
+# 1. The build would take longer and have a larger BuildRequires footprint.
+# 2. The generated PDF has timestamps in it, which would inevitably result
+#    in multilib conflicts due to slightly different timestamps.
+# So instead, we run this manually when rebasing to a new upstream release,
+# and treat the resulting PDF as a separate Source file.
+#
+# You will need to have the docbook packages installed to run this.
+# Expect it to take about 20 minutes and use about 160MB of disk.
+
+set -e
+
+# Pass package version (e.g., 9.1.2) as argument
+VERSION=$1
+
+test -z "$VERSION" && VERSION=`awk '/^Version:/ { print $2; }' postgresql.spec`
+
+TARGETFILE=postgresql-$VERSION-US.pdf
+test -f "$TARGETFILE" && echo "$TARGETFILE exists" && exit 1
+
+echo Building $TARGETFILE ...
+
+# Unpack postgresql
+
+rm -rf postgresql-$VERSION
+
+tar xfj postgresql-$VERSION.tar.bz2
+
+cd postgresql-$VERSION
+
+# Apply any patches that affect the PDF documentation
+
+# patch -p1 < ../xxx.patch
+
+# Configure ...
+
+./configure >/dev/null
+
+# Build the PDF docs
+
+cd doc/src/sgml
+
+make postgres-US.pdf >make.log
+
+mv -f postgres-US.pdf ../../../../$TARGETFILE
+
+# Clean up
+
+cd ../../../..
+
+rm -rf postgresql-$VERSION
+
+exit 0

SOURCES/postgresql-13.16.tar.bz2.sha256

@@ -0,0 +1 @@
+c9cbbb6129f02328204828066bb3785c00a85c8ca8fd329c2a8a53c1f5cd8865  postgresql-13.16.tar.bz2

SOURCES/postgresql-15.8.tar.bz2.sha256

@@ -0,0 +1 @@
+4403515f9a69eeb3efebc98f30b8c696122bfdf895e92b3b23f5b8e769edcb6a  postgresql-15.8.tar.bz2

SOURCES/postgresql-bashprofile

@@ -0,0 +1,4 @@
+[ -f /etc/profile ] && source /etc/profile
+
+PGDATA=/var/lib/pgsql/data
+export PGDATA

SOURCES/postgresql-external-libpq.patch

@@ -0,0 +1,43 @@
+We don't build/install interfaces by upstream's implicit rules.
+
+This patch is used on two places; postgresql.spec and libecpg.spec -- keep those
+in sync!
+
+Related: rhbz#1618698
+
+diff --git a/src/Makefile b/src/Makefile
+index bcdbd95..4bea236 100644
+--- a/src/Makefile
++++ b/src/Makefile
+@@ -20,7 +20,6 @@ SUBDIRS = \
+ 	backend/utils/mb/conversion_procs \
+ 	backend/snowball \
+ 	include \
+-	interfaces \
+ 	backend/replication/libpqwalreceiver \
+ 	backend/replication/pgoutput \
+ 	fe_utils \
+diff --git a/src/Makefile.global.in b/src/Makefile.global.in
+index b9d86ac..29df69f 100644
+--- a/src/Makefile.global.in
++++ b/src/Makefile.global.in
+@@ -549,7 +549,7 @@ endif
+ # How to link to libpq.  (This macro may be used as-is by backend extensions.
+ # Client-side code should go through libpq_pgport or libpq_pgport_shlib,
+ # instead.)
+-libpq = -L$(libpq_builddir) -lpq
++libpq = -lpq
+ 
+ # libpq_pgport is for use by client executables (not libraries) that use libpq.
+ # We force clients to pull symbols from the non-shared libraries libpgport
+@@ -579,7 +579,6 @@ endif
+ # Commonly used submake targets
+ 
+ submake-libpq: | submake-generated-headers
+-	$(MAKE) -C $(libpq_builddir) all
+ 
+ submake-libpgport: | submake-generated-headers
+ 	$(MAKE) -C $(top_builddir)/src/port all
+-- 
+2.21.0
+

SOURCES/postgresql-logging.patch

@@ -0,0 +1,33 @@
+diff -ur postgresql-15.0/src/backend/utils/misc/postgresql.conf.sample patched/src/backend/utils/misc/postgresql.conf.sample
+--- postgresql-15.0/src/backend/utils/misc/postgresql.conf.sample	2022-10-10 22:57:37.000000000 +0200
++++ patched/src/backend/utils/misc/postgresql.conf.sample	2022-10-13 10:51:57.000000000 +0200
+@@ -448,7 +448,7 @@
+ 					# logging_collector to be on.
+ 
+ # This is used when logging to stderr:
+-#logging_collector = off		# Enable capturing of stderr, jsonlog,
++logging_collector = on			# Enable capturing of stderr, jsonlog,
+ 					# and csvlog into log files. Required
+ 					# to be on for csvlogs and jsonlogs.
+ 					# (change requires restart)
+@@ -456,16 +456,16 @@
+ # These are only used if logging_collector is on:
+ #log_directory = 'log'			# directory where log files are written,
+ 					# can be absolute or relative to PGDATA
+-#log_filename = 'postgresql-%Y-%m-%d_%H%M%S.log'	# log file name pattern,
++log_filename = 'postgresql-%a.log'	# log file name pattern,
+ 					# can include strftime() escapes
+ #log_file_mode = 0600			# creation mode for log files,
+ 					# begin with 0 to use octal notation
+-#log_rotation_age = 1d			# Automatic rotation of logfiles will
++log_rotation_age = 1d			# Automatic rotation of logfiles will
+ 					# happen after that time.  0 disables.
+-#log_rotation_size = 10MB		# Automatic rotation of logfiles will
++log_rotation_size = 0			# Automatic rotation of logfiles will
+ 					# happen after that much log output.
+ 					# 0 disables.
+-#log_truncate_on_rotation = off		# If on, an existing log file with the
++log_truncate_on_rotation = on		# If on, an existing log file with the
+ 					# same name as the new log file will be
+ 					# truncated rather than appended to.
+ 					# But such truncation only occurs on

SOURCES/postgresql-no-libecpg.patch

@@ -0,0 +1,12 @@
+diff -up postgresql-13.1/src/interfaces/Makefile.patch10 postgresql-13.1/src/interfaces/Makefile
+--- postgresql-13.1/src/interfaces/Makefile.patch10	2021-02-02 21:33:23.235292305 +0100
++++ postgresql-13.1/src/interfaces/Makefile	2021-02-02 21:33:30.281365440 +0100
+@@ -12,7 +12,7 @@ subdir = src/interfaces
+ top_builddir = ../..
+ include $(top_builddir)/src/Makefile.global
+ 
+-SUBDIRS = libpq ecpg
++SUBDIRS = libpq
+ 
+ $(recurse)
+ 

SOURCES/postgresql-server-pg_config.patch

@@ -0,0 +1,58 @@
+We should ideally provide '/bin/pg_config' in postgresql-server-devel, and
+provide no pg_config binary in libpq package.  But most of the Fedora packages
+that use pg_config actually only build against PG libraries (and
+postgresql-server-devel isn't needed).  So.., to avoid the initial rush around
+rhbz#1618698 change, rather provide pg_server_config binary, which int urn means
+that we'll have to fix only a minimal set of packages which really build
+PostgreSQL server modules.
+
+diff -up postgresql-13.1/src/bin/pg_config/Makefile.patch9 postgresql-13.1/src/bin/pg_config/Makefile
+--- postgresql-13.1/src/bin/pg_config/Makefile.patch9	2020-11-18 09:28:30.885453275 +0100
++++ postgresql-13.1/src/bin/pg_config/Makefile	2020-11-18 09:31:33.926325327 +0100
+@@ -11,6 +11,8 @@
+ PGFILEDESC = "pg_config - report configuration information"
+ PGAPPICON=win32
+ 
++PG_CONFIG = pg_server_config$(X)
++
+ subdir = src/bin/pg_config
+ top_builddir = ../../..
+ include $(top_builddir)/src/Makefile.global
+@@ -19,22 +21,22 @@ OBJS = \
+ 	$(WIN32RES) \
+ 	pg_config.o
+ 
+-all: pg_config
++all: $(PG_CONFIG)
+ 
+-pg_config: $(OBJS) | submake-libpgport
+-	$(CC) $(CFLAGS) $(OBJS) $(LDFLAGS) $(LDFLAGS_EX) $(LIBS) -o $@$(X)
++$(PG_CONFIG): $(OBJS) | submake-libpgport
++	$(CC) $(CFLAGS) $(OBJS) $(LDFLAGS) $(LDFLAGS_EX) $(LIBS) -o $@
+ 
+ install: all installdirs
+-	$(INSTALL_SCRIPT) pg_config$(X) '$(DESTDIR)$(bindir)/pg_config$(X)'
++	$(INSTALL_SCRIPT) $(PG_CONFIG) '$(DESTDIR)$(bindir)/$(PG_CONFIG)'
+ 
+ installdirs:
+ 	$(MKDIR_P) '$(DESTDIR)$(bindir)'
+ 
+ uninstall:
+-	rm -f '$(DESTDIR)$(bindir)/pg_config$(X)'
++	rm -f '$(DESTDIR)$(bindir)/$(PG_CONFIG)'
+ 
+ clean distclean maintainer-clean:
+-	rm -f pg_config$(X) $(OBJS)
++	rm -f $(PG_CONFIG) $(OBJS)
+ 	rm -rf tmp_check
+ 
+ check:
+diff -up postgresql-13.1/src/bin/pg_config/nls.mk.patch9 postgresql-13.1/src/bin/pg_config/nls.mk
+--- postgresql-13.1/src/bin/pg_config/nls.mk.patch9	2020-11-18 09:28:30.885453275 +0100
++++ postgresql-13.1/src/bin/pg_config/nls.mk	2020-11-18 09:32:00.735599526 +0100
+@@ -1,4 +1,4 @@
+ # src/bin/pg_config/nls.mk
+-CATALOG_NAME     = pg_config
++CATALOG_NAME     = pg_server_config
+ AVAIL_LANGUAGES  = cs de el es fr he it ja ka ko pl pt_BR ru sv tr uk vi zh_CN
+ GETTEXT_FILES    = pg_config.c ../../common/config_info.c ../../common/exec.c

SOURCES/postgresql-var-run-socket.patch

@@ -0,0 +1,53 @@
+Change the built-in default socket directory to be /var/run/postgresql.
+For backwards compatibility with (probably non-libpq-based) clients that
+might still expect to find the socket in /tmp, also create a socket in
+/tmp.  This is to resolve communication problems with clients operating
+under systemd's PrivateTmp environment, which won't be using the same
+global /tmp directory as the server; see bug #825448.
+
+Note that we apply the socket directory change at the level of the
+hard-wired defaults in the C code, not by just twiddling the setting in
+postgresql.conf.sample; this is so that the change will take effect on
+server package update, without requiring any existing postgresql.conf
+to be updated.  (Of course, a user who dislikes this behavior can still
+override it via postgresql.conf.)
+
+diff --git a/src/backend/utils/misc/guc.c b/src/backend/utils/misc/guc.c
+index 9481f2d..75532c7 100644
+--- a/src/backend/utils/misc/guc.c
++++ b/src/backend/utils/misc/guc.c
+@@ -3196,7 +3196,7 @@ static struct config_string ConfigureNamesString[] =
+ 		},
+ 		&Unix_socket_directories,
+ #ifdef HAVE_UNIX_SOCKETS
+-		DEFAULT_PGSOCKET_DIR,
++		DEFAULT_PGSOCKET_DIR ", /tmp",
+ #else
+ 		"",
+ #endif
+diff --git a/src/bin/initdb/initdb.c b/src/bin/initdb/initdb.c
+index feeff9e..3e3d784 100644
+--- a/src/bin/initdb/initdb.c
++++ b/src/bin/initdb/initdb.c
+@@ -1234,7 +1234,7 @@ setup_config(void)
+ 
+ #ifdef HAVE_UNIX_SOCKETS
+ 	snprintf(repltok, sizeof(repltok), "#unix_socket_directories = '%s'",
+-			 DEFAULT_PGSOCKET_DIR);
++			 DEFAULT_PGSOCKET_DIR ", /tmp");
+ #else
+ 	snprintf(repltok, sizeof(repltok), "#unix_socket_directories = ''");
+ #endif
+diff --git a/src/include/pg_config_manual.h b/src/include/pg_config_manual.h
+index e278fa0..9ee15d4 100644
+--- a/src/include/pg_config_manual.h
++++ b/src/include/pg_config_manual.h
+@@ -201,7 +201,7 @@
+  * support them yet.
+  */
+ #ifndef WIN32
+-#define DEFAULT_PGSOCKET_DIR  "/tmp"
++#define DEFAULT_PGSOCKET_DIR  "/var/run/postgresql"
+ #else
+ #define DEFAULT_PGSOCKET_DIR ""
+ #endif

SOURCES/postgresql.pam

@@ -0,0 +1,3 @@
+#%PAM-1.0
+auth		include		password-auth
+account		include		password-auth

SOURCES/postgresql.tmpfiles.d

@@ -0,0 +1 @@
+d /run/postgresql 0755 postgres postgres -

SOURCES/rpm-pgsql.patch

@@ -0,0 +1,72 @@
+For the RPMs, we want the custom installation directories to end in
+/pgsql not /postgresql.  This is historical but not worth changing.
+
+Notice that this patch also makes the appending of /pgsql unconditional.
+This is to avoid unexpected behavior if the RPM is built in a working
+directory whose path happens to include "postgres" or "pgsql" already.
+However, datadir and sysconfdir are already set up in the specfile's
+configure call, so we do not have to append anything to them.
+
+
+diff -Naur postgresql-9.0.1.orig/src/Makefile.global.in postgresql-9.0.1/src/Makefile.global.in
+--- postgresql-9.0.1.orig/src/Makefile.global.in	2010-10-01 10:25:44.000000000 -0400
++++ postgresql-9.0.1/src/Makefile.global.in	2010-10-11 11:52:05.224975308 -0400
+@@ -55,8 +55,7 @@
+ # Installation directories
+ #
+ # These are set by the equivalent --xxxdir configure options.  We
+-# append "postgresql" to some of them, if the string does not already
+-# contain "pgsql" or "postgres", in order to avoid directory clutter.
++# append "pgsql" to some of them, in order to avoid directory clutter.
+ #
+ # In a PGXS build, we cannot use the values inserted into Makefile.global
+ # by configure, since the installation tree may have been relocated.
+@@ -74,45 +73,23 @@
+ bindir := @bindir@
+ 
+ datadir := @datadir@
+-ifeq "$(findstring pgsql, $(datadir))" ""
+-ifeq "$(findstring postgres, $(datadir))" ""
+-override datadir := $(datadir)/postgresql
+-endif
+-endif
+ 
+ sysconfdir := @sysconfdir@
+-ifeq "$(findstring pgsql, $(sysconfdir))" ""
+-ifeq "$(findstring postgres, $(sysconfdir))" ""
+-override sysconfdir := $(sysconfdir)/postgresql
+-endif
+-endif
+ 
+ libdir := @libdir@
+ 
+ pkglibdir = $(libdir)
+-ifeq "$(findstring pgsql, $(pkglibdir))" ""
+-ifeq "$(findstring postgres, $(pkglibdir))" ""
+-override pkglibdir := $(pkglibdir)/postgresql
+-endif
+-endif
++override pkglibdir := $(pkglibdir)/pgsql
+ 
+ includedir := @includedir@
+ 
+ pkgincludedir = $(includedir)
+-ifeq "$(findstring pgsql, $(pkgincludedir))" ""
+-ifeq "$(findstring postgres, $(pkgincludedir))" ""
+-override pkgincludedir := $(pkgincludedir)/postgresql
+-endif
+-endif
++override pkgincludedir := $(pkgincludedir)/pgsql
+ 
+ mandir := @mandir@
+ 
+ docdir := @docdir@
+-ifeq "$(findstring pgsql, $(docdir))" ""
+-ifeq "$(findstring postgres, $(docdir))" ""
+-override docdir := $(docdir)/postgresql
+-endif
+-endif
++override docdir := $(docdir)/pgsql
+ 
+ htmldir := @htmldir@
+