You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
openssl3/0078-Add-FIPS-indicator-par...

139 lines
5.9 KiB

From 0c4aaedf29a1ed1559762515bfeaa5923925e18f Mon Sep 17 00:00:00 2001
From: Clemens Lang <cllang@redhat.com>
Date: Thu, 11 Aug 2022 09:27:12 +0200
Subject: [PATCH 1/2] Add FIPS indicator parameter to HKDF
NIST considers HKDF only acceptable when used as in TLS 1.3, and
otherwise unapproved. Add an explicit indicator attached to the
EVP_KDF_CTX that can be queried using EVP_KDF_CTX_get_params() to
determine whether the KDF operation was approved after performing it.
Signed-off-by: Clemens Lang <cllang@redhat.com>
Related: rhbz#2114772
---
include/crypto/evp.h | 7 ++++
include/openssl/core_names.h | 1 +
include/openssl/kdf.h | 4 ++
providers/implementations/kdfs/hkdf.c | 53 +++++++++++++++++++++++++++
4 files changed, 65 insertions(+)
diff --git a/include/crypto/evp.h b/include/crypto/evp.h
index e70d8e9e84..76fb990de4 100644
--- a/include/crypto/evp.h
+++ b/include/crypto/evp.h
@@ -219,6 +219,13 @@ struct evp_mac_st {
OSSL_FUNC_mac_set_ctx_params_fn *set_ctx_params;
};
+#ifdef FIPS_MODULE
+/* According to NIST Special Publication 800-131Ar2, Section 8: Deriving
+ * Additional Keys from a Cryptographic Key, "[t]he length of the
+ * key-derivation key [i.e., the input key] shall be at least 112 bits". */
+# define EVP_KDF_FIPS_MIN_KEY_LEN (112 / 8)
+#endif
+
struct evp_kdf_st {
OSSL_PROVIDER *prov;
int name_id;
diff --git a/include/openssl/core_names.h b/include/openssl/core_names.h
index 21c94d0488..c019afbbb0 100644
--- a/include/openssl/core_names.h
+++ b/include/openssl/core_names.h
@@ -223,6 +223,7 @@ extern "C" {
#define OSSL_KDF_PARAM_X942_SUPP_PUBINFO "supp-pubinfo"
#define OSSL_KDF_PARAM_X942_SUPP_PRIVINFO "supp-privinfo"
#define OSSL_KDF_PARAM_X942_USE_KEYBITS "use-keybits"
+#define OSSL_KDF_PARAM_REDHAT_FIPS_INDICATOR "redhat-fips-indicator"
/* Known KDF names */
#define OSSL_KDF_NAME_HKDF "HKDF"
diff --git a/include/openssl/kdf.h b/include/openssl/kdf.h
index 0983230a48..86171635ea 100644
--- a/include/openssl/kdf.h
+++ b/include/openssl/kdf.h
@@ -63,6 +63,10 @@ int EVP_KDF_names_do_all(const EVP_KDF *kdf,
# define EVP_KDF_HKDF_MODE_EXTRACT_ONLY 1
# define EVP_KDF_HKDF_MODE_EXPAND_ONLY 2
+# define EVP_KDF_REDHAT_FIPS_INDICATOR_UNDETERMINED 0
+# define EVP_KDF_REDHAT_FIPS_INDICATOR_APPROVED 1
+# define EVP_KDF_REDHAT_FIPS_INDICATOR_NOT_APPROVED 2
+
#define EVP_KDF_SSHKDF_TYPE_INITIAL_IV_CLI_TO_SRV 65
#define EVP_KDF_SSHKDF_TYPE_INITIAL_IV_SRV_TO_CLI 66
#define EVP_KDF_SSHKDF_TYPE_ENCRYPTION_KEY_CLI_TO_SRV 67
diff --git a/providers/implementations/kdfs/hkdf.c b/providers/implementations/kdfs/hkdf.c
index afdb7138e1..6f06fa58fe 100644
--- a/providers/implementations/kdfs/hkdf.c
+++ b/providers/implementations/kdfs/hkdf.c
@@ -298,6 +298,56 @@ static int kdf_hkdf_get_ctx_params(void *vctx, OSSL_PARAM params[])
return 0;
return OSSL_PARAM_set_size_t(p, sz);
}
+
+#ifdef FIPS_MODULE
+ if ((p = OSSL_PARAM_locate(params, OSSL_KDF_PARAM_REDHAT_FIPS_INDICATOR))
+ != NULL) {
+ int fips_indicator = EVP_KDF_REDHAT_FIPS_INDICATOR_UNDETERMINED;
+ switch (ctx->mode) {
+ case EVP_KDF_HKDF_MODE_EXTRACT_AND_EXPAND:
+ /* TLS 1.3 never uses extract-and-expand */
+ fips_indicator = EVP_KDF_REDHAT_FIPS_INDICATOR_NOT_APPROVED;
+ break;
+ case EVP_KDF_HKDF_MODE_EXTRACT_ONLY:
+ {
+ /* When TLS 1.3 uses extract, the following holds:
+ * 1. The salt length matches the hash length, and either
+ * 2.1. the key is all zeroes and matches the hash length, or
+ * 2.2. the key originates from a PSK (resumption_master_secret
+ * or some externally esablished key), or an ECDH or DH key
+ * derivation. See
+ * https://www.rfc-editor.org/rfc/rfc8446#section-7.1.
+ * Unfortunately at this point, we cannot verify where the key
+ * comes from, so all we can do is check the salt length.
+ */
+ const EVP_MD *md = ossl_prov_digest_md(&ctx->digest);
+ if (md != NULL && ctx->salt_len == (size_t) EVP_MD_get_size(md))
+ fips_indicator = EVP_KDF_REDHAT_FIPS_INDICATOR_APPROVED;
+ else
+ fips_indicator = EVP_KDF_REDHAT_FIPS_INDICATOR_NOT_APPROVED;
+ }
+ break;
+ case EVP_KDF_HKDF_MODE_EXPAND_ONLY:
+ /* When TLS 1.3 uses expand, it always provides a label that
+ * contains an uint16 for the length, followed by between 7 and 255
+ * bytes for a label string that starts with "tls13 " or "dtls13".
+ * For compatibility with future versions, we only check for "tls"
+ * or "dtls". See
+ * https://www.rfc-editor.org/rfc/rfc8446#section-7.1 and
+ * https://www.rfc-editor.org/rfc/rfc9147#section-5.9. */
+ if (ctx->label != NULL
+ && ctx->label_len >= 2 /* length */ + 4 /* "dtls" */
+ && (strncmp("tls", (const char *)ctx->label + 2, 3) == 0 ||
+ strncmp("dtls", (const char *)ctx->label + 2, 4) == 0))
+ fips_indicator = EVP_KDF_REDHAT_FIPS_INDICATOR_APPROVED;
+ else
+ fips_indicator = EVP_KDF_REDHAT_FIPS_INDICATOR_NOT_APPROVED;
+ break;
+ }
+ return OSSL_PARAM_set_int(p, fips_indicator);
+ }
+#endif /* defined(FIPS_MODULE) */
+
return -2;
}
@@ -306,6 +356,9 @@ static const OSSL_PARAM *kdf_hkdf_gettable_ctx_params(ossl_unused void *ctx,
{
static const OSSL_PARAM known_gettable_ctx_params[] = {
OSSL_PARAM_size_t(OSSL_KDF_PARAM_SIZE, NULL),
+#ifdef FIPS_MODULE
+ OSSL_PARAM_int(OSSL_KDF_PARAM_REDHAT_FIPS_INDICATOR, NULL),
+#endif /* defined(FIPS_MODULE) */
OSSL_PARAM_END
};
return known_gettable_ctx_params;
--
2.38.1