rpms
/
frr
21
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from 'c9'
${ noResults }
frr/SOURCES/0012-bfd-not-working-in-vrf...

256 lines
7.7 KiB
Raw Permalink Blame History

From edc3f63167fd95e4e70287743c9b252415c9336e Mon Sep 17 00:00:00 2001
From: Philippe Guibert <philippe.guibert@6wind.com>
Date: Thu, 7 Jul 2022 14:33:48 +0200
Subject: [PATCH] bfdd: allow l3vrf bfd sessions without udp leaking
Until now, when in vrf-lite mode, the BFD implementation
creates a single UDP socket and relies on the following
sysctl value to 1:
echo 1 > /proc/sys/net/ipv4/udp_l3mdev_accept
With this setting, the incoming BFD packets from a given
vrf, would leak to the default vrf, and would match the
UDP socket.
The drawback of this solution is that udp packets received
on a given vrf may leak to an other vrf. This may be a
security concern.
The commit addresses this issue by avoiding this leak
mechanism. An UDP socket is created for each vrf, and each
socket uses new setsockopt option: SO_REUSEADDR + SO_REUSEPORT.
With this option, the incoming UDP packets are distributed on
the available sockets. The impact of those options with l3mdev
devices is unknown. It has been observed that this option is not
needed, until the default vrf sockets are created.
To ensure the BFD packets are correctly routed to the appropriate
socket, a BPF filter has been put in place and attached to the
sockets : SO_ATTACH_REUSEPORT_CBPF. This option adds a criterium
to force the packet to choose a given socket. If initial criteria
from the default distribution algorithm were not good, at least
two sockets would be available, and the CBPF would force the
selection to the same socket. This would come to the situation
where an incoming packet would be processed on a different vrf.
The bpf code is the following one:
struct sock_filter code[] = {
{ BPF_RET | BPF_K, 0, 0, 0 },
};
struct sock_fprog p = {
.len = sizeof(code)/sizeof(struct sock_filter),
.filter = code,
};
if (setsockopt(sd, SOL_SOCKET, SO_ATTACH_REUSEPORT_CBPF, &p, sizeof(p))) {
zlog_warn("unable to set SO_ATTACH_REUSEPORT_CBPF on socket: %s",
strerror(errno));
return -1;
}
Some tests have been done with by creating vrf contexts, and by using
the below vtysh configuration:
ip route 2.2.2.2/32 10.126.0.2
vrf vrf2
ip route 2.2.2.2/32 10.126.0.2
!
interface ntfp2
ip address 10.126.0.1/24
!
interface ntfp3 vrf vrf4
ip address 10.126.0.1/24
!
interface ntfp2 vrf vrf1
ip address 10.126.0.1/24
!
interface ntfp2.100 vrf vrf2
ip address 10.126.0.1/24
!
interface ntfp2.200 vrf vrf3
ip address 10.126.0.1/24
!
line vty
!
bfd
peer 10.126.0.2 vrf vrf2
!
peer 10.126.0.2 vrf vrf3
!
peer 10.126.0.2
!
peer 10.126.0.2 vrf vrf4
!
peer 2.2.2.2 multihop local-address 1.1.1.1
!
peer 2.2.2.2 multihop local-address 1.1.1.1 vrf vrf2
transmit-interval 1500
receive-interval 1500
!
The results showed no issue related to packets received by
the wrong vrf. Even changing the udp_l3mdev_accept flag to
1 did not change the test results.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
---
bfdd/bfd.c | 66 +++++++++++++++++++++++------------------------
bfdd/bfd_packet.c | 45 ++++++++++++++++++++++++++++++++
2 files changed, 77 insertions(+), 34 deletions(-)
diff --git a/bfdd/bfd.c b/bfdd/bfd.c
index 483beb1b17c..a1619263588 100644
--- a/bfdd/bfd.c
+++ b/bfdd/bfd.c
@@ -1950,40 +1950,38 @@ static int bfd_vrf_enable(struct vrf *vrf)
if (bglobal.debug_zebra)
zlog_debug("VRF enable add %s id %u", vrf->name, vrf->vrf_id);
- if (vrf->vrf_id == VRF_DEFAULT ||
- vrf_get_backend() == VRF_BACKEND_NETNS) {
- if (!bvrf->bg_shop)
- bvrf->bg_shop = bp_udp_shop(vrf);
- if (!bvrf->bg_mhop)
- bvrf->bg_mhop = bp_udp_mhop(vrf);
- if (!bvrf->bg_shop6)
- bvrf->bg_shop6 = bp_udp6_shop(vrf);
- if (!bvrf->bg_mhop6)
- bvrf->bg_mhop6 = bp_udp6_mhop(vrf);
- if (!bvrf->bg_echo)
- bvrf->bg_echo = bp_echo_socket(vrf);
- if (!bvrf->bg_echov6)
- bvrf->bg_echov6 = bp_echov6_socket(vrf);
-
- if (!bvrf->bg_ev[0] && bvrf->bg_shop != -1)
- thread_add_read(master, bfd_recv_cb, bvrf,
- bvrf->bg_shop, &bvrf->bg_ev[0]);
- if (!bvrf->bg_ev[1] && bvrf->bg_mhop != -1)
- thread_add_read(master, bfd_recv_cb, bvrf,
- bvrf->bg_mhop, &bvrf->bg_ev[1]);
- if (!bvrf->bg_ev[2] && bvrf->bg_shop6 != -1)
- thread_add_read(master, bfd_recv_cb, bvrf,
- bvrf->bg_shop6, &bvrf->bg_ev[2]);
- if (!bvrf->bg_ev[3] && bvrf->bg_mhop6 != -1)
- thread_add_read(master, bfd_recv_cb, bvrf,
- bvrf->bg_mhop6, &bvrf->bg_ev[3]);
- if (!bvrf->bg_ev[4] && bvrf->bg_echo != -1)
- thread_add_read(master, bfd_recv_cb, bvrf,
- bvrf->bg_echo, &bvrf->bg_ev[4]);
- if (!bvrf->bg_ev[5] && bvrf->bg_echov6 != -1)
- thread_add_read(master, bfd_recv_cb, bvrf,
- bvrf->bg_echov6, &bvrf->bg_ev[5]);
- }
+ if (!bvrf->bg_shop)
+ bvrf->bg_shop = bp_udp_shop(vrf);
+ if (!bvrf->bg_mhop)
+ bvrf->bg_mhop = bp_udp_mhop(vrf);
+ if (!bvrf->bg_shop6)
+ bvrf->bg_shop6 = bp_udp6_shop(vrf);
+ if (!bvrf->bg_mhop6)
+ bvrf->bg_mhop6 = bp_udp6_mhop(vrf);
+ if (!bvrf->bg_echo)
+ bvrf->bg_echo = bp_echo_socket(vrf);
+ if (!bvrf->bg_echov6)
+ bvrf->bg_echov6 = bp_echov6_socket(vrf);
+
+ if (!bvrf->bg_ev[0] && bvrf->bg_shop != -1)
+ thread_add_read(master, bfd_recv_cb, bvrf, bvrf->bg_shop,
+ &bvrf->bg_ev[0]);
+ if (!bvrf->bg_ev[1] && bvrf->bg_mhop != -1)
+ thread_add_read(master, bfd_recv_cb, bvrf, bvrf->bg_mhop,
+ &bvrf->bg_ev[1]);
+ if (!bvrf->bg_ev[2] && bvrf->bg_shop6 != -1)
+ thread_add_read(master, bfd_recv_cb, bvrf, bvrf->bg_shop6,
+ &bvrf->bg_ev[2]);
+ if (!bvrf->bg_ev[3] && bvrf->bg_mhop6 != -1)
+ thread_add_read(master, bfd_recv_cb, bvrf, bvrf->bg_mhop6,
+ &bvrf->bg_ev[3]);
+ if (!bvrf->bg_ev[4] && bvrf->bg_echo != -1)
+ thread_add_read(master, bfd_recv_cb, bvrf, bvrf->bg_echo,
+ &bvrf->bg_ev[4]);
+ if (!bvrf->bg_ev[5] && bvrf->bg_echov6 != -1)
+ thread_add_read(master, bfd_recv_cb, bvrf, bvrf->bg_echov6,
+ &bvrf->bg_ev[5]);
+
if (vrf->vrf_id != VRF_DEFAULT) {
bfdd_zclient_register(vrf->vrf_id);
bfdd_sessions_enable_vrf(vrf);
diff --git a/bfdd/bfd_packet.c b/bfdd/bfd_packet.c
index d34d6427628..054a9bfbf21 100644
--- a/bfdd/bfd_packet.c
+++ b/bfdd/bfd_packet.c
@@ -876,6 +876,14 @@ void bfd_recv_cb(struct thread *t)
"no session found");
return;
}
+ /*
+ * We may have a situation where received packet is on wrong vrf
+ */
+ if (bfd && bfd->vrf && bfd->vrf != bvrf->vrf) {
+ cp_debug(is_mhop, &peer, &local, ifindex, vrfid,
+ "wrong vrfid.");
+ return;
+ }
/* Ensure that existing good sessions are not overridden. */
if (!cp->discrs.remote_discr && bfd->ses_state != PTM_BFD_DOWN &&
@@ -1208,10 +1216,41 @@ int bp_set_tos(int sd, uint8_t value)
return 0;
}
+static bool bp_set_reuse_addr(int sd)
+{
+ int one = 1;
+
+ if (setsockopt(sd, SOL_SOCKET, SO_REUSEADDR, &one, sizeof(one)) == -1) {
+ zlog_warn("set-reuse-addr: setsockopt(SO_REUSEADDR, %d): %s",
+ one, strerror(errno));
+ return false;
+ }
+ return true;
+}
+
+static bool bp_set_reuse_port(int sd)
+{
+ int one = 1;
+
+ if (setsockopt(sd, SOL_SOCKET, SO_REUSEPORT, &one, sizeof(one)) == -1) {
+ zlog_warn("set-reuse-port: setsockopt(SO_REUSEPORT, %d): %s",
+ one, strerror(errno));
+ return false;
+ }
+ return true;
+}
+
+
static void bp_set_ipopts(int sd)
{
int rcvttl = BFD_RCV_TTL_VAL;
+ if (!bp_set_reuse_addr(sd))
+ zlog_fatal("set-reuse-addr: failed");
+
+ if (!bp_set_reuse_port(sd))
+ zlog_fatal("set-reuse-port: failed");
+
if (bp_set_ttl(sd, BFD_TTL_VAL) != 0)
zlog_fatal("set-ipopts: TTL configuration failed");
@@ -1453,6 +1492,12 @@ static void bp_set_ipv6opts(int sd)
int ipv6_pktinfo = BFD_IPV6_PKT_INFO_VAL;
int ipv6_only = BFD_IPV6_ONLY_VAL;
+ if (!bp_set_reuse_addr(sd))
+ zlog_fatal("set-reuse-addr: failed");
+
+ if (!bp_set_reuse_port(sd))
+ zlog_fatal("set-reuse-port: failed");
+
if (bp_set_ttlv6(sd, BFD_TTL_VAL) == -1)
zlog_fatal(
"set-ipv6opts: setsockopt(IPV6_UNICAST_HOPS, %d): %s",
Reference in new issue View Git Blame Copy Permalink