diff --git a/tests/p_crypto-policies-scripts b/tests/p_crypto-policies-scripts
new file mode 120000
index 0000000..b8938a2
--- /dev/null
+++ b/tests/p_crypto-policies-scripts
@@ -0,0 +1 @@
+p_crypto-policies
\ No newline at end of file
diff --git a/tests/p_crypto-policies/001-prepare_environment.sh b/tests/p_crypto-policies/001-prepare_environment.sh
new file mode 100755
index 0000000..78ff10e
--- /dev/null
+++ b/tests/p_crypto-policies/001-prepare_environment.sh
@@ -0,0 +1,14 @@
+#!/bin/bash
+
+echo "Подготовка окружения для тестирования пакета ${TEST_PACKAGE_NAME}"
+
+# в пакете crypto-policies слабай зависимость на этот пакет,
+# поэтому для надёжности устанавливаем его вручную
+/bin/yum -y install openssl-gost-engine
+
+# Обновляем passwd, чтобы он показывал, что пароль пользователя использует GOST crypt
+# Старый пакет passwd не понимает GOST crypt и выводит "unknown crypt".
+# В этом случае рухнет тесткейс 5 теста 07-passwd-gost-crypting.sh
+/bin/yum -y update passwd
+
+exit 0
diff --git a/tests/p_crypto-policies/01-file-presence.sh b/tests/p_crypto-policies/01-file-presence.sh
new file mode 100755
index 0000000..5516e21
--- /dev/null
+++ b/tests/p_crypto-policies/01-file-presence.sh
@@ -0,0 +1,32 @@
+#!/bin/bash
+
+echo "Тест наличия файлов"
+
+source library/sh_lib.sh
+
+check=0
+
+files=(
+/usr/share/crypto-policies/policies/GOST-ONLY-PAM.pol
+/usr/share/crypto-policies/policies/GOST-ONLY.pol
+/usr/share/crypto-policies/policies/modules/GOST.pmod
+/usr/share/crypto-policies/policies/modules/PAM-GOST.pmod
+)
+
+count=${#files[@]}
+for (( i=0; i<count; i++ ))
+do
+    ls -l ${files[$i]}
+    check=$(eq_is_success ${check} 0)
+
+    filesize=$(stat -c%s ${files[$i]})
+    if [ $filesize -eq 0 ]; then
+        echo "File ${files[$i]} length == 0 -- Error"
+        let check+=1
+    else
+        echo "File ${files[$i]} length == ${filesize} -- OK"
+    fi
+done
+
+check_test_status ${check} "$0"
+exit ${check}
diff --git a/tests/p_crypto-policies/02-default_gost-policy-accept.sh b/tests/p_crypto-policies/02-default_gost-policy-accept.sh
new file mode 100755
index 0000000..53f8ff1
--- /dev/null
+++ b/tests/p_crypto-policies/02-default_gost-policy-accept.sh
@@ -0,0 +1,100 @@
+#!/bin/bash
+
+# set +e
+set -x
+
+echo "Тест на применимость политики DEFAULT:GOST"
+
+source library/sh_lib.sh
+
+check=0
+
+###########################################
+# Test 1. Current policy
+echo "Test 1. Check current policy is DEFAULT"
+current_policy=$(/usr/bin/update-crypto-policies --show)
+if [[ "$current_policy" == "DEFAULT" ]]; then
+    echo "Current policy: ${current_policy} -- OK"
+else
+    echo "Current policy: ${current_policy} -- Error, should be DEFAULT"
+    let check+=1
+fi
+echo "---------------------------------------"
+
+###########################################
+# Test 2.
+echo "Test 2. Default files test"
+cat /etc/crypto-policies/back-ends/opensslcnf.config | /bin/grep gost
+check=$(not_eq_is_success ${check} 0)
+
+# файл /etc/crypto-policies/back-ends/auth.config - симлинк на пустой файл
+ls -l /etc/crypto-policies/back-ends/auth.config
+filename="/etc/crypto-policies/back-ends/auth.config"
+filesize=$(stat -Lc%s ${filename})
+if [ $filesize -eq 0 ]; then
+    echo "File ${filename} length == 0 -- OK"
+else
+    echo "File ${filename} length == ${filesize} -- Error, should be empty"
+    let check+=1
+fi
+
+# cat /etc/pam.d/password-auth | grep gost данная команда должна возвращать пустое значение и результат выполнения echo $? = 1
+cat /etc/pam.d/password-auth | /bin/grep gost
+check=$(not_eq_is_success ${check} 0)
+
+# cat /etc/pam.d/system-auth | grep gost данная команда должна возвращать пустое значение и результат выполнения echo $? = 1
+cat /etc/pam.d/system-auth | /bin/grep gost
+check=$(not_eq_is_success ${check} 0)
+echo "---------------------------------------"
+
+###########################################
+# Test 3.
+echo "Test 3. Set GOST policy"
+/usr/bin/update-crypto-policies --set DEFAULT:GOST
+check=$(eq_is_success ${check} 0)
+
+###########################################
+# Test 4.
+echo "Test 4. Files test after set GOST policy"
+
+cat /etc/crypto-policies/back-ends/opensslcnf.config | /bin/grep gost
+check=$(eq_is_success ${check} 0)
+
+# файл /etc/crypto-policies/back-ends/auth.config - пустой
+ls -l /etc/crypto-policies/back-ends/auth.config
+filename="/etc/crypto-policies/back-ends/auth.config"
+filesize=$(stat -c%s ${filename})
+if [ $filesize -eq 0 ]; then
+    echo "File ${filename} length == 0 -- OK"
+else
+    echo "File ${filename} length == ${filesize} -- Error, should be empty"
+    let check+=1
+fi
+
+# cat /etc/pam.d/password-auth | grep gost данная команда должна возвращать пустое значение и результат выполнения echo $? = 1
+cat /etc/pam.d/password-auth | /bin/grep gost
+check=$(not_eq_is_success ${check} 0)
+
+# cat /etc/pam.d/system-auth | grep gost данная команда должна возвращать пустое значение и результат выполнения echo $? = 1
+cat /etc/pam.d/system-auth | /bin/grep gost
+check=$(not_eq_is_success ${check} 0)
+echo "---------------------------------------"
+
+###########################################
+# Test 5.
+echo "Test 5. Check current policy is GOST"
+current_policy=$(/usr/bin/update-crypto-policies --show)
+if [[ "$current_policy" == "DEFAULT:GOST" ]]; then
+    echo "Current policy: ${current_policy} -- OK"
+else
+    echo "Current policy: ${current_policy} -- Error, should be DEFAULT:GOST"
+    let check+=1
+fi
+echo "---------------------------------------"
+
+echo "Reset policy to default"
+/usr/bin/update-crypto-policies --set DEFAULT
+echo "---------------------------------------"
+
+check_test_status ${check} "$0"
+exit ${check}
diff --git a/tests/p_crypto-policies/03-pam-gost.sh b/tests/p_crypto-policies/03-pam-gost.sh
new file mode 100755
index 0000000..4c18849
--- /dev/null
+++ b/tests/p_crypto-policies/03-pam-gost.sh
@@ -0,0 +1,97 @@
+#!/bin/bash
+
+# set +e
+set -x
+
+echo "Тест на применимость политики DEFAULT:PAM-GOST"
+
+source library/sh_lib.sh
+
+check=0
+
+# 1. Reset policy to default
+echo "Reset policy to default"
+/usr/bin/update-crypto-policies --set DEFAULT
+echo "---------------------------------------"
+
+######################################
+echo "Test 2. Default files test"
+
+cat /etc/crypto-policies/back-ends/opensslcnf.config | /bin/grep gost
+check=$(not_eq_is_success ${check} 0)
+
+# файл /etc/crypto-policies/back-ends/auth.config - симлинк на пустой файл
+ls -l /etc/crypto-policies/back-ends/auth.config
+filename="/etc/crypto-policies/back-ends/auth.config"
+filesize=$(stat -Lc%s ${filename})
+if [ $filesize -eq 0 ]; then
+    echo "File ${filename} length == 0 -- OK"
+else
+    echo "File ${filename} length == ${filesize} -- Error, should be empty"
+    let check+=1
+fi
+
+# cat /etc/pam.d/password-auth | grep gost данная команда должна возвращать пустое значение и результат выполнения echo $? = 1
+cat /etc/pam.d/password-auth | /bin/grep gost
+check=$(not_eq_is_success ${check} 0)
+
+# cat /etc/pam.d/system-auth | grep gost данная команда должна возвращать пустое значение и результат выполнения echo $? = 1
+cat /etc/pam.d/system-auth | /bin/grep gost
+check=$(not_eq_is_success ${check} 0)
+echo "---------------------------------------"
+
+######################################
+echo "Test 3. Set PAM:GOST policy"
+
+/usr/bin/update-crypto-policies --set DEFAULT:PAM-GOST
+check=$(eq_is_success ${check} 0)
+current_policy=$(/usr/bin/update-crypto-policies --show)
+if [[ "$current_policy" == "DEFAULT:PAM-GOST" ]]; then
+    echo "Current policy: ${current_policy} -- OK"
+else
+    echo "Current policy: ${current_policy} -- Error, should be DEFAULT:PAM-GOST"
+    let check+=1
+fi
+echo "---------------------------------------"
+
+######################################
+echo "Test 4. Files test after set GOST policy"
+cat /etc/crypto-policies/back-ends/opensslcnf.config
+cat /etc/crypto-policies/back-ends/opensslcnf.config | /bin/grep gost
+check=$(not_eq_is_success ${check} 0)
+
+# файл /etc/crypto-policies/back-ends/auth.config - не пустой, его содержимое
+#
+#custom/minimal_gost
+#with-gost
+filename="/etc/crypto-policies/back-ends/auth.config"
+filesize=$(stat -c%s ${filename})
+if [ $filesize -eq 0 ]; then
+    echo "File ${filename} length == 0 -- Error, should  not be empty"
+    let check+=1
+else
+    echo "File ${filename} length == ${filesize} -- OK"
+    cat /etc/crypto-policies/back-ends/auth.config | /bin/grep gost
+    check=$(eq_is_success ${check} 0)
+fi
+
+# cat /etc/pam.d/password-auth | grep gost
+# password    sufficient                                   pam_unix.so gost_yescrypt shadow nullok use_authtok
+# cat /etc/pam.d/password-auth
+cat /etc/pam.d/password-auth | /bin/grep gost
+check=$(eq_is_success ${check} 0)
+
+# cat /etc/pam.d/system-auth | grep gost вывод не должен быть пустым, должно выводиться:
+# # cat /etc/pam.d/system-auth | grep gost
+# password    sufficient                                   pam_unix.so gost_yescrypt shadow nullok use_authtok
+# cat /etc/pam.d/system-auth
+cat /etc/pam.d/system-auth | /bin/grep gost
+check=$(eq_is_success ${check} 0)
+echo "---------------------------------------"
+
+echo "Reset policy to default"
+/usr/bin/update-crypto-policies --set DEFAULT
+echo "---------------------------------------"
+
+check_test_status ${check} "$0"
+exit ${check}
diff --git a/tests/p_crypto-policies/04-policy-cmds.sh b/tests/p_crypto-policies/04-policy-cmds.sh
new file mode 100755
index 0000000..921ea86
--- /dev/null
+++ b/tests/p_crypto-policies/04-policy-cmds.sh
@@ -0,0 +1,35 @@
+#!/bin/bash
+
+# set +e
+set -x
+
+echo "Тест на корректность формирования команд политик"
+
+source library/sh_lib.sh
+
+check=0
+
+######################################
+echo "Test 1. Files presence test"
+ls -l /usr/share/crypto-policies/reload-cmds.sh
+check=$(eq_is_success ${check} 0)
+echo "---------------------------"
+
+######################################
+echo "Test 2. Command test"
+
+# cat /usr/share/crypto-policies/reload-cmds.sh | grep auth_apply.sh
+# /usr/share/crypto-policies-scripts/auth_apply.sh 2>/dev/null || :
+s_cmd=$(cat /usr/share/crypto-policies/reload-cmds.sh | grep auth_apply.sh)
+check=$(eq_is_success ${check} 0)
+
+cat "$s_cmd"
+if [[ "$s_cmd" == "/usr/share/crypto-policies-scripts/auth_apply.sh 2>/dev/null || :" ]]; then
+    echo "Command OK"
+else
+    echo "Error: command not found"
+    let check+=1
+fi
+
+check_test_status ${check} "$0"
+exit ${check}
diff --git a/tests/p_crypto-policies/05-gost_engine-openssl.sh b/tests/p_crypto-policies/05-gost_engine-openssl.sh
new file mode 100755
index 0000000..e8fa88e
--- /dev/null
+++ b/tests/p_crypto-policies/05-gost_engine-openssl.sh
@@ -0,0 +1,75 @@
+#!/bin/bash
+
+# set +e
+set -x
+
+echo "Тест что gost engine подключен к openssl"
+
+source library/sh_lib.sh
+
+check=0
+
+######################################
+echo "1. Reset policy to default"
+/usr/bin/update-crypto-policies --set DEFAULT
+echo "---------------------------------------"
+
+######################################
+echo "Test 2. Files test"
+
+# cat /etc/crypto-policies/back-ends/opensslcnf.config | grep gost
+#  данная команда должна возвращать пустое значение и результат выполнения echo $? = 1
+cat /etc/crypto-policies/back-ends/opensslcnf.config | /bin/grep gost
+check=$(not_eq_is_success ${check} 0)
+
+# файл /etc/crypto-policies/back-ends/auth.config - пустой
+# файл /etc/crypto-policies/back-ends/auth.config - симлинк на пустой файл
+ls -l /etc/crypto-policies/back-ends/auth.config
+filename="/etc/crypto-policies/back-ends/auth.config"
+filesize=$(stat -Lc%s ${filename})
+if [ $filesize -eq 0 ]; then
+    echo "File ${filename} length == 0 -- OK"
+else
+    echo "File ${filename} length == ${filesize} -- Error, should be empty"
+    let check+=1
+fi
+
+# cat /etc/pam.d/password-auth | grep gost данная команда должна возвращать пустое значение и результат выполнения echo $? = 1
+cat /etc/pam.d/password-auth | /bin/grep gost
+check=$(not_eq_is_success ${check} 0)
+
+# cat /etc/pam.d/system-auth | grep gost данная команда должна возвращать пустое значение и результат выполнения echo $? = 1
+cat /etc/pam.d/system-auth | /bin/grep gost
+check=$(not_eq_is_success ${check} 0)
+echo "---------------------------------------"
+
+######################################
+echo "Test 3. Set GOST policy"
+/usr/bin/update-crypto-policies --set DEFAULT:GOST
+check=$(eq_is_success ${check} 0)
+echo "---------------------------------------"
+
+######################################
+echo "Test 4. Test openssl"
+openssl_expected_output="TLS_AES_256_GCM_SHA384         TLSv1.3 Kx=any      Au=any   Enc=AESGCM(256)            Mac=AEAD
+TLS_CHACHA20_POLY1305_SHA256   TLSv1.3 Kx=any      Au=any   Enc=CHACHA20/POLY1305(256) Mac=AEAD
+TLS_AES_128_GCM_SHA256         TLSv1.3 Kx=any      Au=any   Enc=AESGCM(128)            Mac=AEAD
+TLS_AES_128_CCM_SHA256         TLSv1.3 Kx=any      Au=any   Enc=AESCCM(128)            Mac=AEAD
+LEGACY-GOST2012-GOST8912-GOST8912 TLSv1   Kx=GOST     Au=GOST12 Enc=GOST89(256)            Mac=GOST89
+IANA-GOST2012-GOST8912-GOST8912 TLSv1   Kx=GOST     Au=GOST12 Enc=GOST89(256)            Mac=GOST89
+GOST2001-GOST89-GOST89         TLSv1   Kx=GOST     Au=GOST01 Enc=GOST89(256)            Mac=GOST89
+GOST2012-NULL-GOST12           TLSv1   Kx=GOST     Au=GOST12 Enc=None                   Mac=GOST2012
+GOST2001-NULL-GOST94           TLSv1   Kx=GOST     Au=GOST01 Enc=None                   Mac=GOST94"
+openssl_out=$(/usr/bin/openssl ciphers -v 'kGOST')
+echo "openssl out:"
+echo "${openssl_out}"
+if [[ $openssl_out == $openssl_expected_output ]]; then
+    echo "openssl out is valid"
+else
+    echo "ERROR: openssl out is invalid"
+    let check+=1
+fi
+echo "---------------------------------------"
+
+check_test_status ${check} "$0"
+exit ${check}
diff --git a/tests/p_crypto-policies/06-generate-gost-certificate.sh b/tests/p_crypto-policies/06-generate-gost-certificate.sh
new file mode 100755
index 0000000..2291f92
--- /dev/null
+++ b/tests/p_crypto-policies/06-generate-gost-certificate.sh
@@ -0,0 +1,78 @@
+#!/bin/bash
+
+# set +e
+set -x
+
+echo "Тест генерации сертификата с подключенным ГОСТ"
+
+source library/sh_lib.sh
+
+check=0
+
+######################################
+echo "1. Reset policy to default"
+/usr/bin/update-crypto-policies --set DEFAULT
+echo "---------------------------------------"
+
+######################################
+echo "Test 2. Files test"
+
+cat /etc/crypto-policies/back-ends/opensslcnf.config | /bin/grep gost
+check=$(not_eq_is_success ${check} 0)
+
+# файл /etc/crypto-policies/back-ends/auth.config - симлинк на пустой файл
+ls -l /etc/crypto-policies/back-ends/auth.config
+filename="/etc/crypto-policies/back-ends/auth.config"
+filesize=$(stat -Lc%s ${filename})
+if [ $filesize -eq 0 ]; then
+    echo "File ${filename} length == 0 -- OK"
+else
+    echo "File ${filename} length == ${filesize} -- Error, should be empty"
+    let check+=1
+fi
+
+# cat /etc/pam.d/password-auth | grep gost данная команда должна возвращать пустое значение и результат выполнения echo $? = 1
+cat /etc/pam.d/password-auth | /bin/grep gost
+check=$(not_eq_is_success ${check} 0)
+
+# cat /etc/pam.d/system-auth | grep gost данная команда должна возвращать пустое значение и результат выполнения echo $? = 1
+cat /etc/pam.d/system-auth | /bin/grep gost
+check=$(not_eq_is_success ${check} 0)
+echo "---------------------------------------"
+
+######################################
+echo "Test 3. Command test"
+/usr/bin/openssl req -x509 -newkey gost2012_256 -pkeyopt paramset:A -nodes -keyout key.pem -out cert.pem -md_gost12_256
+check=$(not_eq_is_success ${check} 0)
+echo "---------------------------------------"
+
+######################################
+echo "Test 4. Set GOST policy"
+/usr/bin/update-crypto-policies --set DEFAULT:GOST
+check=$(eq_is_success ${check} 0)
+echo "---------------------------------------"
+
+######################################
+echo "Test 5. Rerun command from test 3"
+# /usr/bin/openssl req -x509 -newkey gost2012_256 -pkeyopt paramset:A -nodes -keyout key.pem -out cert.pem -md_gost12_256
+config_path=$(pwd)/tests/p_crypto-policies/files/req.conf
+openssl req -x509 -newkey gost2012_256 -pkeyopt paramset:A -nodes -keyout gost_key.pem -out gost_cert.pem -md_gost12_256 -config "${config_path}"
+check=$(eq_is_success ${check} 0)
+ls -l gost_key.pem
+ls -l gost_cert.pem
+check=$(eq_is_success ${check} 0)
+echo "---------------------------------------"
+
+######################################
+echo "Test 6. Check new GOST certificate"
+# $ openssl x509 -in cert.pem -text -noout | grep GOST
+  #        Signature Algorithm: GOST R 34.10-2012 with GOST R 34.11-2012 (256 bit)
+  #            Public Key Algorithm: GOST R 34.10-2012 with 256 bit modulus
+  #    Signature Algorithm: GOST R 34.10-2012 with GOST R 34.11-2012 (256 bit)
+# файл cert.pem должен существовать и вывод от grep не должен быть пустым
+/usr/bin/openssl x509 -in gost_cert.pem -text -noout | grep GOST
+check=$(eq_is_success ${check} 0)
+echo "---------------------------------------"
+
+check_test_status ${check} "$0"
+exit ${check}
diff --git a/tests/p_crypto-policies/07-passwd-gost-crypting.sh b/tests/p_crypto-policies/07-passwd-gost-crypting.sh
new file mode 100755
index 0000000..afc4be0
--- /dev/null
+++ b/tests/p_crypto-policies/07-passwd-gost-crypting.sh
@@ -0,0 +1,81 @@
+#!/bin/bash
+
+# set +e
+set -x
+
+echo "Тест шифрования пароля по ГОСТ"
+
+source library/sh_lib.sh
+
+check=0
+USER='testusr'
+USER_PASS='test123_PaSs!Word'
+
+######################################
+echo "1. Reset policy to default"
+/usr/bin/update-crypto-policies --set DEFAULT
+echo "---------------------------------------"
+
+######################################
+echo "Test 2. Files test"
+# cat /etc/crypto-policies/back-ends/opensslcnf.config | grep gost
+#  данная команда должна возвращать пустое значение и результат выполнения echo $? = 1
+cat /etc/crypto-policies/back-ends/opensslcnf.config | /bin/grep gost
+check=$(not_eq_is_success ${check} 0)
+
+# файл /etc/crypto-policies/back-ends/auth.config - пустой
+# файл /etc/crypto-policies/back-ends/auth.config - симлинк на пустой файл
+ls -l /etc/crypto-policies/back-ends/auth.config
+filename="/etc/crypto-policies/back-ends/auth.config"
+filesize=$(stat -Lc%s ${filename})
+if [ $filesize -eq 0 ]; then
+    echo "File ${filename} length == 0 -- OK"
+else
+    echo "File ${filename} length == ${filesize} -- Error, should be empty"
+    let check+=1
+fi
+
+# cat /etc/pam.d/password-auth | grep gost данная команда должна возвращать пустое значение и результат выполнения echo $? = 1
+cat /etc/pam.d/password-auth | /bin/grep gost
+check=$(not_eq_is_success ${check} 0)
+
+# cat /etc/pam.d/system-auth | grep gost данная команда должна возвращать пустое значение и результат выполнения echo $? = 1
+cat /etc/pam.d/system-auth | /bin/grep gost
+check=$(not_eq_is_success ${check} 0)
+echo "---------------------------------------"
+
+######################################
+echo "Test 3. Set GOST policy"
+/usr/bin/update-crypto-policies --set DEFAULT:PAM-GOST
+check=$(eq_is_success ${check} 0)
+echo "---------------------------------------"
+
+######################################
+echo "4. Add user, set password"
+/usr/bin/update-crypto-policies --show
+useradd ${USER}
+check=$(eq_is_success ${check} 0)
+
+# ВНИМАНИЕ!
+# chpasswd не поддерживает PAM-профили - см. https://inferitos.asproagile.ru/_module/agile/view/issue/1063
+# поэтому здесь пока нельзя использовать эту команду
+# chpasswd <<< "${USER}:${USER_PASS}"
+
+echo "${USER_PASS}" | passwd "${USER}" --stdin
+check=$(eq_is_success ${check} 0)
+echo "---------------------------------------"
+
+######################################
+echo "5. Check is password encrypted"
+passwd -S ${USER} | grep "GOST Yescrypt"
+check=$(eq_is_success ${check} 0)
+echo "---------------------------------------"
+
+echo "Cleanup. Remove user, reset policy to default"
+/usr/bin/update-crypto-policies --set DEFAULT
+userdel -f -r ${USER}
+echo "---------------------------------------"
+
+
+check_test_status ${check} "$0"
+exit ${check}
diff --git a/tests/p_crypto-policies/files/req.conf b/tests/p_crypto-policies/files/req.conf
new file mode 100644
index 0000000..31c1df7
--- /dev/null
+++ b/tests/p_crypto-policies/files/req.conf
@@ -0,0 +1,11 @@
+[req]
+distinguished_name = req_distinguished_name
+prompt = no
+
+[req_distinguished_name]
+C = RU
+ST = Moscow
+L = Moscow
+O = YourOrganization
+OU = YourOU
+CN = dns_name.com